Кронштейны и крепления | ИнТеР

Кронштейны и крепления

Key Features Attractive In-Wall enclosure for the ConferenceSHOT FX and ConferenceSHOT 10 USB camera (formerly known as ClearSHOT 10)
Key Features Attractive In-Wall enclosure for RoboSHOT UHD Cameras.
The easy-to-install ceiling solution – compatible with most invertible pro AV camerasKey Features:
The easy-to-install ceiling solution – compatible with most invertible pro AV camerasKey Features:
Key Features Suspended Ceiling Mount for a clean and easy installation.
Key Features Thin Profile Wall Mount Bracket for Vaddio HD-Series Cameras for a clean and complete installation.
Key Features Wall Mount for Vaddio ConferenceSHOT 10 and ConferenceSHOT FX Camera Please note: This mount is included with purchase of ConferenceSHOT 10 or ConferenceSHOT FX Camera. Heavy gauge steel construction Mounting hardware included *Camera not included This Package Includes:
Key Features Undermount brackets can be used for under a table, on a wall or above mounting compatible Vaddio 1/2 RU device. Works with: EasyUSB Mixer/Amp, EasyUSB AudioBridge, OneLINK HDMI, OneLINK Bridge, EasyMic MicPOD I/O, EasyUSB PRO MIC I/O and Quick-Connect USB. Contains two (2) black powder coated ears which can be mounted on either side of a compatible 1/2 RU chassis for stable and discreet mounting.
Key Features The Rack Panel is drilled out to hold up to mix and match up to two PresenterPOD or Quick-Connect DVI/HDMI Interfaces on a 1-RU panel. It fits into a standard 19-inch rack mount enclosure.
Key Features Adjustable extension mounting bracket for a clean and flexible installation.
Key Features THIS PRODUCT HAS BEEN DISCONTINUED - The recommended replacement is the Chief CMA106.Key Features:
Key Features The ConferenceSHOT AV Table Mount provides stability for the ConferenceSHOT AV camera and speaker in video conferencing rooms and other collaborative spaces. Built from 14 gauge steel, its slip-resistant rubber feet bumpers hold the camera and speaker steady. Built for long-lasting durability with rugged heavy gauge steel construction.This Package Includes:
Key Features The Indoor Flush Mount Domes provide integrators with a secure camera housing designed to protect the PTZ camera against damage that can be caused when cameras are exposed to the elements and vandalism. The clear and smoked optically correct domes provide for distortion-free viewing that allows the camera operator to position the camera anywhere within its pan/tilt range.
Key Features The Indoor Pendant Mount Domes provide integrators with a secure camera housing designed to protect the PTZ camera against damage that can be caused when cameras are exposed to the elements and vandalism. The clear and smoked optically correct domes provide for distortion-free viewing that allows the camera operator to position the camera anywhere within its pan/tilt range.
Key Features The Outdoor Pendant Mount Domes provide integrators with a secure camera housing designed to protect the PTZ camera against damage that can be caused when cameras are exposed to the elements and vandalism. Designed for use under a building overhang, canopy or any other building structure and out of the direct elements. The clear and smoked optically correct domes provide for distortion-free viewing that allows the camera operator to position the camera anywhere within its pan/tilt range.
Key Features Key Features:
Key Features Aluminum tubular telescopic design for wall mounting cameras.
Key Features The Flush Mount Dome includes a 7.3-inch (18.54cm) clear flush mount dome enclosure and internal brackets to support the Sony EVI-D70 (camera not included).
Key Features The Vaddio Hard Ceiling Installation Kit is designed to provide integrators with an easy-to-install solution for mounting the DocCAM 20 HDBT into gypsum board or hard ceiling applications.
Key Features The HuddleSHOT Adjustable Mount’s intelligent design provides an adjustable tilt to optimize the camera’s angle on video call participants. Ideal for any huddle room configuration, with placement options on the table, above the monitor, or below the monitor as well.
Key Features For mounting Vaddio RoboSHOT UHD cameras halfway into a ceiling tile.This Package Includes:
Key Features This mount is used only for the Vaddio RoboSHOT 12 & 30 PTZ Cameras.This Package Includes:
Key Features IN-Wall mounting kit for the Cisco Precision 60 camera.
Key Features The IN-Wall Enclosure for the Cisco PrecisionHD, LifeSize HD, and the Polycom EagleEye is designed and sized to fit the entire PTZ camera system including the camera, EZIM and dongle to enable the use of Cat. 5 cabling. Each system consists of an in-wall mounting box and face frame - both powder coated white, but can be painted to match any decor.
Key Features The IN-Wall Enclosure for the ClearVIEW HD-USB, PowerVIEW HD-22 and HD-30 is designed and sized to fit the entire PTZ camera system including the camera, EZIM and dongle to enable the use of Cat. 5 cabling. Each system consists of an in-wall mounting box and face frame - both powder coated white, but can be painted to match any decor.
Key Features The IN-Wall Enclosure for the LifeSize 10x Camera is designed and sized to fit the entire PTZ camera system including the camera and its respective cabling systems.
Key Features The IN-Wall Enclosure for Sony, Panasonic, and Canon is designed and sized to fit the entire PTZ camera system including the camera, EZIM and dongle to enable the use of Cat. 5 cabling. Each system consists of an in-wall mounting box and face frame - both powder coated white, but can be painted to match any decor.
Key Features The IN-Wall Enclosure for the Sony BRC-Z700, Sony EVI-D80, Sony EVI-D90 and Sony H100 is designed and sized to fit the entire PTZ camera system including the camera, EZIM and dongle to enable the use of Cat. 5 cabling. Each system consists of an in-wall mounting box and face frame - both powder coated white, but can be painted to match any decor.
Key Features The IN-Wall Enclosure for the Sony EVI-HD1 is designed and sized to fit the entire PTZ camera system including the camera, EZIM and dongle to enable the use of Cat. 5 cabling. Each system consists of an in-wall mounting box and face frame - both powder coated white, but can be painted to match any décor.
Key Features The IN-Wall Enclosure for the WideSHOT™, ZoomSHOT™ 20 and Sony EVI-D70 is designed and sized to fit the entire PTZ camera system including the camera and EZCamera Cable Shoe to enable the use of Cat. 5 cabling. Each system consists of an in-wall mounting box and face frame - both powder coated white, but can be painted to match any décor.
Key Features Aluminum long tubular telescopic design for wall/ceiling mounting cameras.
Key Features Offset drop-down ceiling mount compatible with Vaddio RoboSHOT 12 and 30 cameras and Vaddio HD-series PTZ cameras.
Key Features Offset drop-down ceiling mount compatible with Sony BRC Cameras, Sony PRO and CCU H900 and H700, Sony Z700, Z330 and 300 systems, Panasonic HE-50 and HE-120, Panasonic AW-HE120 and AW-HE130, Canon XU-80 and XU-80W, WallVIEW PRO and CCU camera systems.
Key Features Drop-down ceiling mount kit for the RoboTRAK Double Decker Wall Mount. Kit includes a tile support brace, mounting flange, offset drop-down pipe, and all required fastening hardware. Designed to support the RoboTRAK system on its mount, the offset places the center of gravity directly in line with the mounting flange, ensuring that the mount remains level and stable. Note that the RoboTRAK Double-Decker Wall Mount is shipped separately or with the RoboTRAK system and is not included in the Offset Drop-Down Pole for RoboTRAK kit.
Key Features 6-RU rack mount ears fit PCC Premier and PCC MatrixMIX.This Package Includes:
Key Features The Quick-Connect Box Rack Panel mounts up to three Quick-Connect boxes on a tray attached to the back of the rack panel (Quick-Connect boxes are not included).
The easy-to-install ceiling solution – compatible with most invertible pro AV camerasKey Features:
The easy-to-install ceiling solution – compatible with most invertible pro AV camerasKey Features:
Key Features QuickCAT is a universal ceiling camera mount that is compatible with most invertible PTZ cameras and fixed cameras. This ceiling mounting solution is designed for suspended ceilings and is compatible with 2x2’, 2x4', 60x60 cm, and 62.5x62.5 cm ceiling grids – and works even with irregular grids. In addition, its Q-Lock Quick Release Lever provides quick connect/disconnect of the camera. Its integrated key and lock system offers greater security.
Key Features Rack panel designed to hold up to three Quick-Connect SR boxes on a 1-RU panel.
Key Features Installation Kit used for the In-Ceiling Half-Recessed Enclosure.This Package Includes:
Key Features Dual mount holds both cameras in the RoboTRAK system and mounts to a single-gang electrical wall box or directly to drywall. For ceiling installation, use this mount with the Offset Drop-Down Pole for RoboTRAK Mount. Please note: This mount is included with purchase of RoboTRAK system.This Package Includes:
Key Features For cleanly mounting a Vaddio 1/2 rack device.
Key Features Aluminum tubular design for wall mounting cameras.
Key Features Thin Profile Wall Mount Bracket for Canon VC-C50i PTZ Cameras for a clean and complete installation.
Key Features Thin Profile Wall Mount Bracket for LifeSize 10x Cameras for a clean and complete installation.
Key Features Thin Profile Wall Mount Bracket for LifeSize HD Cameras for a clean and complete installation.
Key Features Thin Profile Wall Mount Bracket for Polycom EagleEye Cameras for a clean and complete installation.
Key Features Thin Profile Wall Mount Bracket for Sony BRC-H700, Canon XU-Series, and Panasonic AW-HE130 & AW-HE120 PTZ Cameras for a clean and complete installation.
Key Features Thin Profile Wall Mount Bracket for Sony BRC-H900 and Sony BRC-Z700 PTZ Cameras for a clean and complete installation.
Key Features Thin Profile Wall Mount Bracket for Sony BRC-Z330 and BRC-300 PTZ Cameras for a clean and complete installation.
Key Features Thin Profile Wall Mount Bracket for Sony EVI-D100 PTZ Cameras for a clean and complete installation.
Key Features Thin Profile Wall Mount Bracket for Sony EVI-D70 PTZ Cameras for a clean and complete installation.
Key Features Thin Profile Wall Mount Bracket for Sony EVI-D80 or EVI-D90 PTZ Cameras for a clean and complete installation.
Key Features Thin Profile Wall Mount Bracket for Sony EVI-HD1 PTZ Cameras for a clean and complete installation.
Key Features Thin Profile Wall Mount Bracket for Sony EVI-HD7V and Sony EVI-HD3V PTZ Cameras for a clean and complete installation.
Key Features Thin Profile Wall Mount Bracket for a clean and complete installation. Specifications Color Black Certifications CE Approved, FCC Approved, TAA Compliant Warranty 2 years
Thin profile mount for Vaddio RoboSHOT PTZ Cameras
Key Features Heavy gauge steel wall mount designed for use with all RoboSHOT 12 and RoboSHOT 30 PTZ cameras.
Key Features Thin Profile Wall Mount for Sony SRG-120DH, SRG-120DU, SRG-300H, SRG-300H/W, SRG-300SE, SRG-300SE/W and Panasonic AW-HE40HW, AW-HE40HK, AW-HE40SW and AW-HE40SK
Specifications Color Black Product Width 6.4" (16.26 cm) Product Height 5" (12.70 cm) Product Depth 9.25" (23.50 cm) Warranty 2 years
Specifications Color Black Product Width 6.4" (16.26 cm) Product Height 7" (17.78 cm) Product Depth 9.25" (23.50 cm) Warranty 2 years
Key Features Aluminum tubular J-shaped design for wall/ceiling mount cameras.