Vaddio Cisco Codec Kit for OneLINK HDMI to Cisco Cameras | ИнТеР

Vaddio Cisco Codec Kit for OneLINK HDMI to Cisco Cameras

Extends power, HDMI video and control to your Cisco camera over a single category cable.
Packaged for Cisco SX20, SX80 or C-Series codecs and compatible with most Cisco Precision series cameras.
Key Features:

  • Simple, clutter-free camera extension with HDBaseT technology
  • Power, video and control over a single Cat-5e cable up to 230 ft. (70m), or over a Cat-6 cable up to 328 ft. (100m)

Key Features

For Cisco Telepresence SX20, SX80 or C-Series codecs with Cisco Precision series cameras
More Flexibility for Room Design and Installation Tailored for Cisco codec systems and compatible with most Cisco Precision series cameras, this OneLINK codec kit provides more freedom of choice for camera selection and equipment placement.
Benefits:

  • More flexibility in camera and/or codec placement – no longer dependent on the location of the codec
  • HDBaseT interface extends power, video and control up to 328 feet/100 meters – Cisco systems can now go into larger rooms
  • Plug and play usability
  • Intuitive browser-based user interface for configuration and system administration

Please note: When connecting a Cisco Precision 40 or PrecisionHD 1080p2.5x camera to a OneLINK HDMI, you will need to provide a Cisco CAB-PHD4XS2-SPLIT cable. When connecting a Cisco SX20 codec to a OneLINK HDMI, you will need to provide the same Cisco CAB-PHD4XS2-SPLIT cable.
This Package Includes:

  • OneLINK HDMI Interface
  • OneLINK HDMI EZIM with mounting screws
  • Thin Profile Wall Mount (black) with mounting hardware
  • Quick-Start Guide
  • 48V power supply with AC cord set(s)
  • 1' (0.3m) cat-5 cable, black
  • 3' (0.9m) cat-5 cable, black
  • 1' (0.3m) directional cat-5 cable for Cisco PrecisionHD*
  • 3' (0.3m) directional cat-5 cable for Cisco SX20**
  • 1' (0.3m) HDMI cable
  • 3' (0.9m) HDMI cable
  • 1' (0.3m) EIAJ-04 to 5.5x2.1 power cable for camera
  • EZCamera RS-232 Control Adapter
  • EZCamera RS-232 Control Adapter 998-1002-232 for Cisco codec serial 9-pin ports

* If connecting to a Cisco PrecisionHD 4xS2 camera, a user-supplied Cisco CAB-PHD4XS2-SPLIT cable is required**If connecting to a Cisco SX20 codec, a user-supplied Cisco CAB-PHD4XS2-SPLIT cable is required

Specifications

  • Color Black
  • Certifications CE Approved, FCC Approved, UL Listed, TAA Compliant
  • Product Width 8.38" (21.27 cm)
  • Product Height 1.72" (4.37 cm)
  • Product Depth 6.5" (16.51 cm)
  • Product Weight 3.3 lbs (1.5 kg)
  • Power Type Local Power
  • Input Ports HDbT
  • Output Ports HDMI, IP-Streaming
  • Browser-based User Interface for Remote Control Built-in
  • Control Method Web UI, Telnet, RS-232 and IR Remote
  • OneLINK HDMI adds 328 ft (100 M) Power, Video, Control Extension, HDMI
  • Operating Temperature 32° to 104°F (0° to 40°C)
  • Warranty 2 years
  • Power Supply 48 VDC, 1.36 A, 12 VDC, 3.0 A
  • Distance 328 ft (100 m)

Отправить запрос

Защита от спама