AV-расширения | ИнТеР

AV-расширения

USB-расширения

Vaddio USB 2.0 Active Extension Cable
Key Features This 65.6 ft. (20m) shielded active cable supports the full bandwidth of USB 2.0 and can be used to extend all USB 2.0 products. The cable's female end connects to your USB device and the male end connects to your computer, extending USB audio, video, and control with one repeater hub in situations where the USB device and computer cannot be located near each other. When extending Vaddio devices the cable is conveniently port-powered an optional 5V power supply for the female end is also included for extension of non-Vaddio devices.
Vaddio USB 2.0 Extenders
Specifications Color Black Product Width 3.4" (8.64 cm) Product Height 1" (2.54 cm) Product Depth 3" (7.62 cm) Signal Type USB 2.0, USB 1.1
Vaddio USB 3 Extenders
Key Features USB 3 Extenders enable you to extend USB 3.1 beyond the standard 3m cable limit for USB 3.1 peripheral devices (like a camera or other AV source). This extender system is composed of two individual units, the Local Extender, and the Remote Extender, and has the following features:

Кодеки и интерфейсы

Cisco Codec Kit for OneLINK Bridge to Vaddio HDBaseT Cameras
Brings your Vaddio HDBaseT camera and non-USB audio components into your USB conferencing environment and enables you to pair them with a Cisco codec for traditional videoconferencing quality. Extends power, video and control to your camera over a single category cable. Packaged for Cisco SX20, SX80 or C-Series codecs; compatible with RoboSHOT 12E and 30E HDBT, RoboSHOT 20 UHD, RoboSHOT 40 UHD, RoboSHOT IW and DocCAM 20 HDBT.Key Features:
Cisco Codec Kit for OneLINK HDMI to Vaddio HDBaseT Cameras
Extends power, HDMI video and control to your Vaddio HDBaseT camera over a single category cable. Packaged for Cisco SX20, SX80 or C-Series codecs; compatible with RoboSHOT 12E and 30E HDBT, RoboSHOT 20 UHD, RoboSHOT 40 UHD, RoboSHOT IW and DocCAM 20 HDBT.Key Features:
Polycom Codec Kit for OneLINK Bridge to Vaddio HDBaseT Cameras
Brings your Vaddio HDBaseT camera and non-USB audio components into your USB conferencing environment and enables you to pair them with a Polycom codec for traditional videoconferencing quality. Extends power, video and control to your camera over a single category cable. Packaged for Polycom 300, 310, 500 or 700 codecs; compatible with RoboSHOT 12E and 30E HDBT, RoboSHOT 20 UHD, RoboSHOT 40 UHD, RoboSHOT IW and DocCAM 20 HDBT.Key Features:
Polycom Codec Kit for OneLINK HDMI to Vaddio HDBaseT Cameras
Extends power, video and control to your Vaddio HDBaseT camera over a single category cable. Packaged for Polycom 300, 310, 500 or 700 codecs; compatible with RoboSHOT 12E and 30E HDBT, RoboSHOT 20 UHD, RoboSHOT 40 UHD, RoboSHOT IW and DocCAM 20 HDBT.Key Features:
Vaddio Cisco Codec Kit for OneLINK Bridge to Cisco Cameras
Brings your traditional videoconferencing equipment – or just your Cisco camera – into a USB cloud conferencing environment for the best of both worlds. Extends power, video and control to your camera over a single category cable. Packaged for Cisco SX20, SX80 or C-Series codecs; compatible with most Cisco Precision series cameras.Key Features:
Vaddio Cisco Codec Kit for OneLINK Bridge to RoboSHOT HDMI Cameras
Brings your legacy RoboSHOT HDMI camera and non-USB audio components into your USB conferencing environment and enables you to pair them with a Cisco codec for traditional videoconferencing quality. Extends power, video and control to your camera over a single category cable. Packaged for Cisco SX20, SX80 or C-Series codecs; compatible with legacy RoboSHOT 12 and 30 HDMI. Not compatible with RoboSHOT 12E HDMI and RoboSHOT 30E HDMI cameras.Key Features:
Vaddio Cisco Codec Kit for OneLINK HDMI to Cisco Cameras
Extends power, HDMI video and control to your Cisco camera over a single category cable. Packaged for Cisco SX20, SX80 or C-Series codecs and compatible with most Cisco Precision series cameras.Key Features:
Vaddio Cisco Codec Kit for OneLINK HDMI to RoboSHOT HDMI Cameras
Extends power, video and control to your legacy RoboSHOT HDMI camera over a single category cable. Packaged for Cisco SX20, SX80 or C-Series codecs; compatible with legacy RoboSHOT 12 HDMI and RoboSHOT 30 HDMI cameras. Not compatible with RoboSHOT 12E HDMI and RoboSHOT 30E HDMI cameras.Key Features:
Vaddio Polycom Codec Kit for OneLINK Bridge to EagleEye IV Camera
Brings your traditional videoconferencing equipment – or just your Polycom camera – into a USB conferencing environment for the best of both worlds. Extends power, video and control to your camera over a single category cable. Packaged for Polycom RealPresence Group series 300, 310, 500 or 700 codecs; compatible with Polycom EagleEye IV camera.Key Features:
Vaddio Polycom Codec Kit for OneLINK Bridge to RoboSHOT HDMI Cameras
Brings your legacy RoboSHOT HDMI camera and non-USB audio components into your USB conferencing environment and enables you to pair them with a Polycom codec for traditional videoconferencing quality. Extends power, video and control to your camera over a single category cable. Packaged for Polycom 300, 310, 500 or 700 codecs; compatible with legacy RoboSHOT 12 HDMI and RoboSHOT 30 HDMI cameras. Not compatible with RoboSHOT 12E HDMI and RoboSHOT 30E HDMI cameras.Key Features:
Vaddio Polycom Codec Kit for OneLINK HDMI to EagleEye IV Camera
Extends power, video and control to your Polycom EagleEye IV camera over a single category cable. Packaged for Polycom 300, 310, 500 or 700 codecs; compatible with Polycom EagleEye IV camera.Key Features:
Vaddio Polycom Codec Kit for OneLINK HDMI to RoboSHOT HDMI Cameras
Extends power, video and control to your Polycom EagleEye IV camera over a single category cable. For Polycom 300, 310, 500 or 700 codecs; compatible with RoboSHOT 12 HDMI and RoboSHOT 30 HDMI cameras. Not compatible with RoboSHOT 12E HDMI and RoboSHOT 30E HDMI cameras.Key Features:

Расширения для камер

OneLINK Bridge for Vaddio HDBaseT Cameras
Brings your Vaddio HDBaseT camera and non-USB audio components into your USB conferencing environment for traditional videoconferencing quality, without the traditional price tag. Compatible with RoboSHOT 12E and 30E HDBT, RoboSHOT 20 UHD, RoboSHOT 40 UHD, RoboSHOT IW and DocCAM 20 HDBT.Key Features:
OneLINK HDMI Extension for Vaddio HDBaseT Cameras
Extends power, HDMI video and control to your Vaddio HDBaseT camera over a single Cat-5e cable. Compatible with RoboSHOT 12 HDBT, RoboSHOT 12E HDBT, RoboSHOT 30 HDBT, RoboSHOT 30E HDBT, RoboSHOT 20 UHD, RoboSHOT 40 UHD, RoboSHOT IW and DocCAM 20 HDBT cameras.Key Features:
Vaddio OneLINK Bridge Kit for RoboSHOT HDMI Cameras
Brings your legacy RoboSHOT HDMI camera and non-USB audio components into your USB conferencing environment for traditional videoconferencing quality – without the traditional price tag. Packaged for legacy RoboSHOT 12 HDMI and RoboSHOT 30 HDMI cameras. Not compatible with RoboSHOT 12E HDMI and RoboSHOT 30E HDMI cameras.Key Features:
Vaddio OneLINK Bridge Kit for Sony and Panasonic HE-Series Cameras
Brings your non-USB camera and non-USB audio components into your USB conferencing environment for traditional videoconferencing quality, without the traditional price tag. Extends power, video and control to your compatible Sony or Panasonic camera over a single category cable. Packaged for Sony SRG and Panasonic HE series cameras.Key Features:
Vaddio OneLINK HDMI Extension for RoboSHOT HDMI Cameras
Extends power, HDMI video and control to your legacy RoboSHOT HDMI camera over a single Cat-5e cable. Compatible with legacy RoboSHOT 12 HDMI and RoboSHOT 30 HDMI cameras. Not compatible with RoboSHOT 12E HDMI and RoboSHOT 30E HDMI cameras.Key Features:
Vaddio OneLINK HDMI Extension for Sony and Panasonic HE-Series Cameras
Extends power, video and control to your Sony or Panasonic camera over a single category cable. Packaged for Sony SRG series and Panasonic HE series cameras.Key Features:
Vaddio Quick-Connect DVI/HDMI SR Interface
Key Features Only sold as part of a QDVI System
Vaddio Quick-Connect Universal CCU Cat-5 Interface
Key Features Only sold as part of a QCCU System The Quick-Connect CCU enables the adjustment of AWB, red and blue gain, brightness, OPWB, gamma, chroma, detail, iris and gain controls with a simple press of a button on the Quick-Connect CCU. These controls deliver a more accurate representation of the image that is being captured and the ability to color match and shade multiple cameras. User-defined adjustments can be stored on three Scene-Store buttons.
Vaddio Quick-Connect USB Interface
Key Features Only sold as part of a QUSB System Quick-Connect USB System delivers high-quality HD video, power and control over two Cat. 5 cables up to 100' for Vaddio PTZ cameras and 150' for Vaddio POV cameras. Based on UVC USB 2.0 standards, Quick-Connect USB outputs include USB 2.0, IP control and streaming (RTSP or HLS), component HD (YPbPr) and HDMI.Please select a system for this quick-connect to see a full list of items.
Vaddio Quick-Connect USB Mini Interface
Key Features Only sold as part of a QMini System The USB Mini was designed to provide simple and effective USB 2.0, 720p/30 streaming and capture capabilities without the need for local analog or digital video outputs. The USB Mini uses UVC (Universal Video Class) drivers, so whatever resolution the UC application needs, the USB Mini will auto-negotiate.