Image |
- 600 lumens ANSI ±10% (rated at 75-80% EBU depending on the lens)
- 10,000:1 dynamic, 1,400:1 FOFO, 450:1 ANSI.
- 95% brightness and colour uniformity after electronic adjustment
|
Display Technology and Resolution |
- Revolutionary solid state projector using a single TI Darkchip 3™ DMD with a solid state illumination engine (no colour wheel) and sealed optics
- Native 1920 x 1200 (16:10 aspect ratio) WUXGA
|
Input |
- signals: Up to 1920 x 1200 WUXGA (Native 1920 x 1200 recommended)
- pixel clock: 330MHz max input
- scan rates: Horizontal: 15-150KHz • Vertical: 23.97-120Hz
|
Inputs, Control & Networking |
- RS232 in/out
- RS422 in
- Ethernet (10/100)
- USB device
- GPIO (RS232 9-pin male connector)
- Dual 7 segment status display
- Remote control (with optional wired XLR connection)
- Slot 1-2 standard (populated): two Dual link DVI-D (330MHz) input cards. Each has a VGA (165MHz) port
- Slots 3-4 unpopulated
- Full bandwidth Analog BNC
- Dual Link DVI input card (330MHz), VGA (165MHz)
- Dual SD/HD-SDI
- Video Decoder*
- Twin HDMI
- Two standard Dual Link DVI input cards (330MHz)
*The Dual link DVI input card has a 330MHz DVI-I connector which can support a single or dual-link DVI, analogue and HDCP video signals with proper cables. There is also an additional 15-pin VGA connector for signals under 165MHz. Only one input is active on this card at a time. Two of these cards come standard on the Christie Mirage WU-L
|
Optical system |
Lens mount
- Mechanical, horizontal and vertical lens shift
- No shutter required
- No iris required – user programmable illumination parameters (eliminates the need for a mechanical shutter)
Illumination
- Full spectrum LED (RGB)
- Illumination package has a MTBF of 60,000 hrs
- Light module can be changed in 15 minutes and is colour and bright level matching in real-time to the projector array
Christie ArrayLOC™
- Manages the brightness and colour levels of all projectors within an array to a common level, in real-time with no additional latency
|
Lenses* - standard or optional |
Fixed
- 0.64:1 WUXGA lens
- 0.75:1 WUXGA lens
Zoom
Offsets
- 0.64:1 lens features ±5% (horizontal) and ±5% (vertical) offset when mounted in landscape orientation
- 0.75:1 lens features ±80% (horizontal) and ±100% (vertical) offset when mounted in landscape orientation
- 1.2-1.6:1 lens features ±80% (horizontal) and ±100% (vertical) offset when mounted in landscape orientation
*Each offset is specified with the other at zero. Simultaneous horizontal and vertical offsets may limit the adjustment range of each.
|
Standard accessories |
- User manual
- IR remote with hard wired cord
- Line cord
- Two Dual Link DVI-D Cards
- 3D sync cable
|
Optional accessories |
- Analog RGBHV BNC input card for Analog sources greater than 165MHz
- Dual link DVI input card*
- Dual HD-SDI input card
- Twin HDMI input card
- User kit (includes manual, IR remote and hard wired cable for the remote)
- Rugged Motion Platform user kit (purpose-built) available
|
Enhanced feature sets |
- Minimum Processing Latency (MPL™)
- Christie Twist™ II – advanced warping/edge-blending hardware technology integrated directly into the projector, includes warping/blending software
- Auto setup, power up
- Menus in 8 languages Multiple channel memories (for recall memory storage)
- Christie ArrayLOC™ – automatic, continuous management of brightness and colour space levels of all projectors in an array to a common level, in real-time
|
Power requirements |
- operating voltage: 100-240V AC 50/60Hz
- operating current: 5.3A
- dissipation: 1364 BTU/hr (variable, dependent on content)
|
Dimensions |
Size:
- Projector head module + light module (no lens): 8.7 x 18.4 x 11.0" (220 x 467 x 287mm)
- Electronics module: 16.5 x 5.5 x 6.7" (420 x 140 x 170mm)
Weight
- Projector head module + light module (no lens): 32lb (14.6kg)
- Electronics module: 9.7lbs (4.4kg)
Shipping weight:
|
Operating Environment |
- Noise: 38dBA at 25°C ambient temperature (without electronics module)
- Operating temperature: 40-95ºF (5-35ºC)
- Humidity: 20-80% non-condensing
|
Regulatory Approvals |
- Directives (EC) 2002/95/EC (RoHS)
- 2002/96/EC (WEEE)
- Regulation (EC) No. 1907/2006 (REACH)
- CAN/CSA C22.2 No. 60950-1
- UL 60950-1
- IEC 60950-1
- FCC, Part 15, Subpart B, Class A
- EN55022/CISPR22 Class A
- EN55024 / CISPR24
- Certifications marks (check with Christie for latest update): cULus (Canada & US), CE (EU), CCC (China), GoST-R (Russia), KC/KCC (Korea), PSE (Japan), C-Tick (Australia & New Zealand)
|
Warranty |
- 2 years parts and labour (inclusive)
- Contact an authorised Christie representative for full details of our limited warranty
|