Image |
Brightness
- 13,000 ISO lumens
- 12,000 Centre lumens
- 11,500 ANSI lumens
Color wheel
- 4 Segment (RGBY) - 2X or 3X speed
Contrast (nominal)
- 1200:1 Full On/Off; 250:1 ANSI
|
Display |
Type
Native resolution
- 1920 x 1080 (2,073,600 pixels) 16:9
|
Illumination system |
Type
- Laser Phosphor with Christie BoldColor Technology
Typical lifetime
- 20,000 hours to half brightness
|
Signal inputs |
Standard
- HDMI x 2 (One on rear panel, one on bottom of projector, independently selectable)
- 3GSDI x 1 (BNC)
- DVI-D x 1 (Digital only)
- HD15 x 1
- USB x 1 (Type B mini) - Display over USB
- USB x 1 (type A) - Image Viewer or WiFi Dongle (optional)
- HDBaseT (RJ45 x 1)
- RJ45 x 1 (ChristiePresenter over wired network connection)
3D
- HDMI 1.4, HDBaseT - Frame Packed, Top/Bottom, Side By Side
- Up to 120Hz output
- 3D Sync In (BNC) - for genlocking projectors
- 3D Sync Out (BNC) - for genlocking projectors or controlling emitter or polarizer
Signals
- HDTV formats VGA through to WUXGA (1920 x 1200)
- Horizontal and vertical scaling while maintaining aspect ratio, all inputs
Pixel clock
Scan rates
- Horizontal: 15kHz to 91kHz
- Vertical: 24Hz to 85Hz
|
Signal outputs |
Monitor out (loop through)
- 3GSDI x 1 (BNC)
- DVI-D x 1 (Digital only)
|
Control and networking |
- RS232 In
- Control via HDBaseT
- Ethernet (10/100) RJ45 with ChristieNET connectivity
- Built-in Backlit Keypad
- Wired Remote Control (3.5mm stereo) - Loop out available for daisy chaining
|
Accessories |
Standard
- IR Remote w/ wired remote jack (wire not included)
- AC Line cords for projector Head
- User Manual
Optional
- Christie One Rigging Frame
- Lens Adapter for E Series Lenses
- 1DWUSB-BGN (Wireless Dongle for video and control)
- HS Fog Filter Covers + Filters (Order once per projector then only filters refills)
- HS Fog Filter Refills (1 set)
- Christie One Mount Plus
- One Mount Extender Rod
- One Mount Rigging Kit (used with One Mount, One Mount Plus and/or One Mount Extender Rod)
- Replacement Remote Control
|
Lens mount |
- Boresight adjustable
- Motorised horizontal and vertical lens offset (Memory Available)
- Motorised zoom and focus adjustment (Memory Available for Full ILS lenses)
|
Lens options |
Lenses
- 0.84-1.02:1 Zoom Lens (No Zoom/Focus Memory) - Adapted 1.2-1.5:1 E Series Lens
- 1.02-1.36:1 Zoom Lens (No Zoom/Focus Memory) - Adapted 1.5-2.0:1 E Series Lens
- 1.2-1.5:1 Zoom Lens (Full ILS)
- 1.5-2.0:1 Zoom Lens (Full ILS)
- 2.0-4.0:1 Zoom Lens (Full ILS)
- 4.0-7.0:1 Zoom Lens (Full ILS)
Offsets (Full ILS lenses)
- +/- 133% Vertical (+/- 720 pixels)
- +/- 50% Horizontal (+/- 480 pixels)
Offsets 0.84-1.02:1
- +110 / -86% Vertical (+596/-466 pixels)
- +34 / -39% Horizontal (+330/-376 pixels)
Offsets 1.02-1.36:1
- +125 / -98 % Vertical (+676/-534 pixels)
- +42 / -47% Horizontal (+408/-457 pixels)
|
Power requirements |
Operating voltage
- Normal: 100–120V AC @ 50/60Hz
Power consumption
- Normal Mode: 1250W +/-15% (220V), 1300W +/-15% (110V)
- ECO1 Mode: 1020W +/-15% (220V), 1050W +/-15%(110V)
- ECO2 Mode: 700W +/-15% (220V), 700W +/-15%(110V)
Operating current
- Normal Mode: 7A (200-240V AC), 14A (100-120V AC)
Dissipation
- Normal Mode: 4435 BTU/hr
- ECO1 Mode: 3580 BTU/hr
- ECO2 Mode: 2390 BTU/hr
|
Audible noise |
- Typical: 465W: 39dB(A)
- Eco Mode: 370W: 37dB(A)
|
Physical specs |
Dimensions
- (L x W x H) 26.65" x 23.46" x 7.99" (677 x 596 x 203mm) without feet
Weight (without lens)
Shipping dimensions
- (L x W x H) 36.34" x 33.19" x 20.20" (923 x 843 x 513mm)
Shipping weight
|
Operating environment |
- Temp: 0 to 40°C (32 to 104°F)
- Humidity: 0 – 85% non-condensing
|
Regulatory |
- UL/CSA/IEC 60950-1
- FCC Class A
- CE
- FDA
- CCC
- KC
- PSE
- CU
- SABS
- BIS
- VCCI
- RCM
- Ukr
- TER
- SASO
This product conforms to all relevant European directives, standards, safety, health and environmental concerns
|
Limited warranty |
- 3 years parts and labour on the projector
- 3 years or 15,000 hours parts and labour on the illumination system*
- Contact an authorised Christie representative for full details of our limited warranty
|