Christie Matrix SIM | ИнТеР

Christie Matrix SIMA simulation projector with unprecedented stability and image quality.

Built on the same stable, long-life RGB-LED illumination platform as the Christie Matrix StIM™, the Christie Matrix SIM offers a virtually maintenance-free option for commercial aviation and other training applications where NVG stimulation is not required.
With the Christie Matrix SIM, the civil aviation sector now has a viable display solution that meets FAA standards and boasts low sustainment costs, low operating costs, real-time auto-calibration and a low latency. The Christie Matrix SIM simulation projection system has been successfully integrated and proven on commercial simulators with FAA qualification approval for complete unrestricted training.
If a trainer goes down, depending on the mean time to repair (MTTR) the amount of time lost can directly translate into fewer training hours, lower quality training and higher maintenance costs. The Christie Matrix SIM provides a virtually maintenance-free display with a life expectancy of between 7-10 years of typical operation.
The advantages of LED illumination and DLP® technology in the Matrix SIM include unprecedented image quality, stability and reliability at the point of purchase and over the extensive lifetime of the display. A wide colour gamut, excellent colour saturation and greater flexibility to manage colour space to best fit application requirements offers image generators enhanced capabilities for producing images that are closer to reality than traditional lamp-based projectors. As well, the high-bandwidth capabilities of LED and DLP ideally complement each other and allow for higher levels of both static and dynamic image fidelity.

       
 
Technology 1DLP
Resolution 1920 x 1200 WUXGA
Brightness 600 Lumens
Contrast 10,000:1 dynamic contrast (under LED control);no mechanical iris required
Illumination RGB LED illumination package
Lamp Life 60,000 hrs MTBF on the illumination system
Height 170mm (6.7")
Width 140mm (5.5")
Depth 420mm (16.5")
Weight 4.4kg (9.7lb)
 
       

The Matrix SIM simulation projection system is a viable display solution that meets FAA standards for civil aviation for complete unrestricted training.
The Christie Matrix SIM is an intelligent display utilising Christie ArrayLOC™, technology that self-adjusts colour and brightness levels in real-time and offers rock-solid system stability. Combined with long life expectancy, this significantly reduces maintenance efforts and ownership costs for years of virtually maintenance-free operation resulting in more uptime and more training. 
Features

  • Integrated, extraordinarily fast LED illumination for 60,000 hrs MTBF on the illumination of the system
  • Visual display solution meets FAA standards for complete unrestricted simulation training
  • ArrayLOC™ - the continuous management of brightness and colour levels of the projectors in the array in real-time, without additional latency
  • No consumables – no lamps for longer life, longer reliability and lower cost of ownership than traditional lamped projectors
  • Solid state technology with single DMD™ - provides unmatched picture reliability, filter-free design and no colour wheel for high reliability
  • Increased colour gamut – for more dynamic and realistic rendering of the training environment
  • Unlimited mounting options – removes restrictions of a lamp for any orientation mounting
  • Modular architecture – small form factor

Specifications

       
 
Brightness:
  • 600 lumens ANSI +/- 10% (rated at 75-80% EBU depending on the lens)
Contrast:
  • 10,000:1 dynamic contrast
  • No mechanical iris required
Uniformity:
  • 95% brightness and colour uniformity after electronic adjustment
Display Technology Type:
  • Revolutionary solid state projector using a single TI Darkchip 3™ DMD with a solid state illumination engine (no colour wheel) and sealed optics.
Native Resolution:
  • Native 1920 x 1200 (WUXGA)(16:10 aspect ratio)
Inputs:
  • Signals: Up to 1920 x 1200 WUXGA recommended
Scan Rates:
  • Vertical – 23.97 Hz to 60 Hz
Inputs, Control and Networking:
  • DVI-D and HD15 analogy standard
  • On-board Ethernet control capabilities(ChristieNET™ functionality)
  • Additional Ethernet connections for ArrayLOC™ network
  • IR/wired remote control as part of optional user kit
  • 2 – RS-232 ports and 1 RS-422 port
Lens Mount:
  • Mechanical, horizontal and vertical lens shift
  • No shutter required
  • No iris required - user programmable illumination parameters(eliminates the need for a mechanical shutter)
Illumination:
  • LED illumination package has an MTBF of 60,000 hrs
  • Light module can be changed in 15 minutes and is color and bright level matching in real-time to the projector array
ArrayLOC™:
  • Manages the brightness and colour levels of all projectors within an array to a common level, in real time with no additional latency
Lenses and Lens Offsets:
  • 0.64:1 fixed lens features ±5% (horizontal) and ±5% (vertical) offset when mounted in landscape orientation
  • 0.75:1 fixed lens features ±80% (horizontal) and ±100% (vertical) offset when mounted in landscape orientation
  • 1.2-1.6:1 zoom lens features ±80% (horizontal) and ±100% (vertical) offset when mounted in landscape orientation
Standard Accessories:
  • Line Cord
Optional Accessories:
  • 0.64:1 WUXGA fixed lens
  • 0.75:1 WUXGA fixed lens
  • 1.2-1.6:1 WUXGA zoom lens
  • Analog RGBHV input card
  • DVI-I input card
  • Remote IR sensor
  • User kit (includes manual, IR remote)
  • Rugged Motion Platform user kit (purpose-built)
Enhanced feature sets:
  • Minimum Processing Latency (MPL™)
  • Christie Twist II – Advanced warping/edge-blending hardware technology integrated directly into the projector,includes warping/blending software 
  • Auto set-up, power up 
  • Menus in 5 languages • AccuFrame adjustable to <6ms 
  • Multiple channel memories (for recall memory storage) 
  • Christie ArrayLOC™ – automatic, continuous management of brightness and colour space levels of all projectors in the array to a common level, in real-time
Power Requirements:
  • Operating Voltage: 100-240V AC @ 50/60Hz
  • Operating Current: 5.3A
  • Power: 400W maximum (variable, dependant on content)
  • Dissipation: 1364 BTU/hr (max)
Dimensions: Projector Head Module + Light Module (no lens)
  • Size: 220 x 467 x 287mm (8.7 x 18.4 x 11.0")
  • Weight: 14.6kg (32lbs)
  • Shipping Weight: 23.6kg (52lbs)
Dimensions: Electronics Module
  • Size: 420 x 140 x 170mm (16.5 x 5.5 x 6.7")
  • Weight: 4.4kg (9.7lbs)
  • Shipping Weight: 23.6kg (52lbs)
Operating Environment:
  • 38dBA at 25°C ambient temperature (without electronics module)
  • Operating Temperature: 40–95°F (5–35°C)
  • Humidity: 20–80% non-condensing
Regulatory Approvals:
  • Directives (EC) 2002/95/EC (RoHS) 
  • 2002/96/EC (WEEE) 
  • Regulation (EC) No. 1907/2006 (REACH)
  • CAN/CSA C22.2 No. 60950-1
  • UL 60950-1 
  • IEC 60950-1 
  • FCC, Part 15, Subpart B, Class A
  • EN55022/CISPR22 Class A 
  • EN55024 / CISPR24
  • Certifications marks (check with Christie for latest update): cULus (Canada & US), CE (EU), CCC (China), GoST-R (Russia),KC/KCC (Korea), PSE (Japan), C-Tick (Australia & New Zealand)
Warranty:
  • 2 years parts and labour
  • Contact an authorised Christie representative for full details of our limited warranty
 
       

Due to constant research, specifications and features are subject to change without notice.

Артикул: 
125-001124-XX
Файлы: 
Иконка PDF Christie Matrix SIM Product Specifications Sheet

Отправить запрос

Защита от спама