Christie Matrix WU7K-JHigh performance for true-to-life simulation

The compact
Christie Matrix WU7K-J DLP® projector produces exceptional image quality and clarity. The Christie Matrix J Series platform provides the highest 3DLP performance on the market, with unsurpassed colour accuracy and adjustability.

The Christie Matrix WU7K-J DLP projector delivers:

Innovative technology
Superior image quality – colour accuracy, stability, contrast, colour and brightness uniformity and control – for the highest levels of realism
Full scalability to support large, multi-channel arrays
Built-in geometric warping and edge blending
High performance 120Hz capability
6,300 ANSI lumens
Easy-to-use interface
An overall low cost of ownership and low cost of operation to meet the demands of today’s real-world simulation display systems.

Features

WUXGA resolution (1920 x 1200)
6,300 ANSI lumens
1.0kW CERMAX® Xenon pre-aligned lamp module for the highest image quality
Up to a full 120Hz native frame rate
Two standard full 330MHz Dual-link DVI-D input cards
Variable contrast ratio using an electronically-adjustable iris for crisp, detailed images – 1600-2000:1 (full on, full off) / 650:1 ANSI
Compact chassis design
Colour Purity Filter (CPF™) (optional, factory-installed only)
Embedded Christie Twist™ image warping and edge blending
Dust-sealed engine, filter-free design
Intelligent Lens System (ILS™) for zoom, focus, horizontal and vertical offset

Powered by dual-image processing, the Christie Matrix J Series displays full resolution at a native frame rate up to 120Hz. Two standard Dual-link DVI input cards support 330MHz bandwidth for full resolution. Using this unique dual-input architecture, two (2) 60Hz RGB inputs can be composited in the projector for a true 120Hz output system capability. This capability allows users to maximise dynamic image quality without compromising system brightness.
The
Christie Matrix WU7K-J has WUXGA resolution and produces high brightness, high contrast and the most natural, accurate, stable colour.
The compact
Christie Matrix WU7K-J is easy to set up and configure, yet performs powerfully and flexibly.
The Christie Matrix J Series models feature Christie AccuFrame™. Developed specifically to address the simulation market, this firmware enables the customer adjustable reduction of perceptible image smearing caused by image retention and eye motion. Christie AccuFrame is fully adjustable to support various frame rates and environments, the unique advanced electronics in all Christie Matrix Series projectors come standard with Christie AccuFrame, to accurately display high speed simulation content for the most true-to-life displays.
Built-in image warping and advanced edge blending is provided by
Christie Twist™. This is a powerful tool that allows pixels to be mapped to any projection surface with proper geometry and perfect pixel to pixel alignment so that arrayed projectors operate as a single, uniform display.

You’ll have peace of mind with the Christie Matrix WU7K-J 3DLP projector’s:

high reliability
superior performance
low cost of ownership,
two-year warranty and flexible, extended warranty options, and access to Christie’s renowned customer service.

This projector couples the benefits of Xenon illumination with the next level of technology, performance and flexibility.
The
Christie Matrix WU7K-J is built to order and can be fitted with a Colour Purity Filter (CPF™). This filter creates deep colour saturation and colour matching with superior black levels for unsurpassed day and night scene blending. Our SuperCR™ technology provides a contrast ratio of up to 2000:1 allowing for low black levels and incredibly accurate night scene images.
The Christie Matrix J Series models are suited to many simulation applications. You get:

the highest colour uniformity
standard features such as Christie Twist™ image warping and edge-blending
RGB colour matching
full control of gamma curves and grayscale tracking
high-input bandwidth

Christie Matrix J Series – real world simulation.

Specifications


Image	Brightness 6,300 ANSI lumens @ 200-240V 4,750 ANSI lumens @ 100-120V Contrast 1600-2000:1 Full Field \| 650:1 ANSI (typical) Uniformity 80% brightness uniformity
Display	Type 3-chip 0.96” DMD Native resolution WUXGA (1920 x 1200)
Lamp	Type 1.0kW CERMAX® Xenon pre-aligned lamp module Estimated life 1,500 hours, typical lamp life
Input	Standard Slot 1-2 populated, standard: two Dual Link DVI-D (330 MHz) input cards with HDMI 1.3 receiver Slot 3-4 unpopulated Optional Analog Dual-link DVI, 3G SD/HD-SDI Video Decoder Twin HDMI Signals HDTV formats VGA through to QXGA (2048 x 1536) Accepts all current HDTV/DTV formats Multistandard video decoder Horizontal and vertical scaling, all inputs Pixel clock 330MHz Scan rates Horizontal: 15kHz to 120kHz Vertical: 23.97Hz to 150Hz (frame lock maximum 120Hz)
Inputs/outputs, control and networking	RS232 In/Out RS422 In Ethernet (10/100) GPIO (RS232 9 Pin male connector) Built-in, backlit, LCD keypad Remote control (with optional wired XLR connection)
Optical system	Dust-sealed, 3-chip, DMD light engine Motorised horizontal and vertical lens offset Scheimpflug/Boresite (tilt) adjustment Built-in light shutter Tool-free lens insertion system
Lens options	Fixed 0.67:1 WU ILS Lens* 1.1:1 WU ILS Lens Zoom 1.16-1.49:1 WU ILS Lens** 1.4-1.8:1 WU ILS Lens 1.8-2.6:1 WU ILS Lens 2.6-4.1:1 WU ILS Lens 4.1-6.9:1 WU ILS Lens 6.9-10.4:1 WU ILS Lens Offsets +/- 112% Vertical +/- 54% Horizontal (* +/-22%V +/- 6%H) (** +/-82%V +/- 38%H)
Standard accessories	IR remote Power cord User manual Christie Twist™ image warping and edge-blending module
Optional accessories	ILS lenses Fixed lenses: 0.67:1, 1.2:1 Zoom lenses: 1.16-1.49:1, 1.4-1.8:1, 1.8-2.6:1, 2.6-4.1:1, 4.1-6.9:1, 6.9-10.4:1 Lamps 1.0kW CERMAX Xenon lamp module Input cards Analog input card DMX512 interface card Dual-link DVI input card Dual SD/HD-SDI input card Twin HDMI input card Video Decoder input card Other ILS lens adapter kit Portrait display adapter ILS lens mount Color Purity Filter (CPF™) (factory installed only) Ceiling mount Ceiling mount extension Stacking kit Remote IR sensor Motion platform ready available build to order*
Enhanced feature sets	Embedded Christie Twist™ image warping and edge blending module Intelligent Lens System (ILS™) Advanced block-artefact reduction Minimum Processing Latency (MPL™) ChristieNET™ Web interface User-friendly, intuitive, LCD keypad Advanced Loop-Thru Twin HDMI card Lamp memory module User-replaceable lamps Advanced 10-bit processing Automatic shut-off Dust-sealed light engine SNMP (simple network management protocol) DHCP (dynamic host configuration protocol) Compatibility with many legacy accessories
Power Requirements	Operating voltage 100-240V AC @ 50/60 Hz Max current 12A @ 100-120V, 8A @ 200-240V AC Max power 1600W Dissipation 5460 BTU/hr
Dimensions	Dimensions (L x W x H): 22.3 x 26.0 x 12.9" (566 x 660 x 328mm) Shipping dimensions (L x W x H): 33.5 x 30.0 x 26.0" (851 x 762 x 660mm) Weight 88lb (40 kg) (without lens) Shipping weight 125lb (57kg)
Operating environment	Temp: 40 to 104° F (5 to 40° C) Humidity: 20 - 80% noncondensing
Regulatory	Directives (EC) 2002/95/EC (RoHS); 2002/96/EC(WEEE); Regulation (EC) No. 1907/2006 (REACH) CAN/CSA C22.2 No. 60950-1 UL 60950-1 IEC/EN 60950-1 FCC, Part 15, Subpart B, Class A EN55022/CISPR22 Class A EN55024 / CISPR24 Certifications marks (check with Christie for latest update): cULus (Canada and US), CE (EU)CCC (China), GoST-R (Russia), KC (Korea)PSE (Japan), C-Tick (Australia and New Zealand),South Africa
Limited warranty	Two years parts and labour (including light engine) Contact an authorised Christie representative for full details of our limited warranty

Due to constant research, specifications and features are subject to change without notice.

Артикул:

132-006129-XX

Файлы:

Matrix WU7K-J SpecSheet

Форма поиска

Christie Matrix WU7K-JHigh performance for true-to-life simulation

Specifications

Отправить запрос