Аксессуары | ИнТеР

Аксессуары

Chief FCAV1U — аксессуар для создания видеостен, до 68 кг., выдвижение до 242 мм
Аксессуар CHIEF FCAV1U для создания видеостен или монтажа в нишу панелей весом до 68 кг., выдвижение до 242 мм., наклон +/- 0.5°/2°, дозаказ MSM1U/MTM1U/MTMP1U/LSM1U/LTM1U/XSM1U/XTM1U

Для мониторов

Chief KMA220B — Dual Horizontal Monitor Accessory
This accessory allows you to view two flat panel screens side-by-side with a pivot or swing arm wall or desk mount.
Chief KMA320B — Triple Horizontal Monitor Accessory
The accessory allows you to view three flat panel screens side-by-side with a pivot or swing arm wall or desk mount.
Chief KRA202 — KONTOUR™ Grommet Accessory - K1D Products
Provides a rock-solid bolt down option for any Kontour™ K1D series product. Note: KRA202 is not for use with new enhanced Kontour products! Discontinued April 1, 2015. Is now included in the new K1D Kontour monitor product.
Chief KRA219B — Kontour™ KRA219 K1 & K2 Narrow-Gap Table Clamp Kit
Use the enhanced Kontour™ KRA219 K1 & K2 Table Clamp Kit for installations when the gap between edge-of-table and rear wall panel is less than 1/2" (12.5 mm).
Chief KRA219S — Kontour™ KRA219 K1 & K2 Narrow-Gap Table Clamp Kit
Use the enhanced Kontour™ KRA219 K1 & K2 Narrow-Gap Table Clamp Kit for installations when the gap between edge-of-table and rear wall panel is less than 1/2" (12.5 mm).
Chief KRA220B — Kontour™ KRA220 K1 & K2 Extension Arm
Use the enhanced Kontour™ KRA220 K1 & K2 Extension Arm to provide an additional 6.5" (165 mm) of reach for installations requiring additional range-of-motion.  Great for use on dual-arm mounts to provide improved push-back of the monitors to free additional work surface real estate while also providing additional extension for deeper work surfaces. Note: use of the KRA220 accessory reduces the total weight capacity of the mount by 15 lbs (6.8 kg)
Chief KRA220S — Kontour™ KRA220 K1 & K2 Extension Arm
Use the enhanced Kontour™ KRA220 K1 & K2 Extension Arm to provide an additional 6.5" (165 mm) of reach for installations requiring additional range-of-motion.  Great for use on dual-arm mounts to provide improved push-back of the monitors to free additional work surface real estate, while also providing additional extension for deeper work surfaces. Note: use of the KRA220 accessory reduces the total weight capacity of the mount by 15 lbs (6.8 kg)
Chief KRA221B — Kontour™ KRA221 K1C Expansion Arm Kit
Use the enhanced Kontour™ KRA221 K1C Expansion Arm Kit to add an additional K1C monitor arm to an existing K1C installation. This provides a fast and easy means of upgrading from an existing single-arm K1C120 to a dual-arm K1C220 configuration. The KRA221 can be used to add a 3rd and/or 4th arm to a center-of-table multi-workstation configuration, using the KRA226 grommet plate accessory.
Chief KRA221S — Kontour™ KRA221 K1C Expansion Arm Kit
Use the enhanced Kontour™ KRA221 K1C Expansion Arm Kit to add an additional K1C monitor arm to an existing K1C installation. This provides a fast and easy means up upgrading from an existing single-arm K1C120 to a dual-arm K1C220 configuration. The KRA221 can be used to add a 3rd and/or 4th arm to a center-of-table multi-workstation configuration, using the KRA226 grommet plate accessory.
Chief KRA222B — Kontour™ KRA222 K2C Expansion Arm Kit
Use the enhanced Kontour™ KRA222 K2C Expansion Arm Kit to add an additional K2C monitor arm to an existing K2C installation. This provides a fast and easy means up upgrading from an existing single-arm K2C120 to a dual-arm K2C220 configuration. The KRA222 can also be used to add a 3rd and/or 4th arm to a center-of-table multi-workstation configuration, using the KRA226 grommet plate accessory.
Chief KRA222S — Kontour™ KRA222 K2C Expansion Arm Kit
Use the enhanced Kontour™ KRA222 K2C Expansion Arm Kit to add an additional K2C monitor arm to an existing K2C installation. This provides a fast & easy means up upgrading from an existing single-arm K2C120 to a dual-arm K2C220 configuration. The KRA222 can also be used to add 3rd or 4th arms to a center-of-table multi-workstation configuration, using the KRA226 grommet plate accessory.
Chief KRA223B — Kontour™ KRA223 Dual Monitor Array Accessory
Use the new Kontour™ KRA223 Dual Monitor Array accessory to upgrade an existing K1 or K2 single-arm monitor mount product to a dual monitor array. Note: only to be used with K1C120, K1D120, K1P120, K1S120, K1W120, K2C120, K2P120, and K2W120 products
Chief KRA223S — Kontour™ KRA223 Dual Monitor Array Accessory
Use the new Kontour™ KRA223 Dual Monitor Array accessory to upgrade an existing K1 or K2 single-arm monitor mount product to a dual monitor array. Note: only to be used with K1C120, K1D120, K1P120, K1S120, K1W120, K2C120, K2P120, and K2W120 products
Chief KRA224B — Kontour™ KRA224 Dual Monitor Array Handle Accessory
Pair the new Kontour™ KRA224 Array Handle accessory with the KRA223 Dual Monitor Array accessory to fully upgrade an existing K1 or K2 single-arm monitor mount product to a dual monitor array with handle. Note: only to be used with K1C120, K1D120, K1P120, K1S120, K1W120, K2C120, K2P120 and K2W120 products
Chief KRA225B — Kontour™ KRA225 Centris™ Extreme Tilt Monitor Head Accessory
Use the Kontour™ KRA225 Centris™ Extreme Tilt Monitor Head accessory to easily upgrade any enhanced K2 series articulating arm mount with the benefits of the enhanced Centris Extreme Tilt head, which includes a full 75-degrees of tilt up of the monitor and quick-release interface for easy monitor servicing.
Chief KRA225S — Kontour™ KRA225 Centris™ Extreme Tilt Monitor Head Accessory
Use the Kontour™ KRA225 Centris™ Extreme Tilt Monitor Head accessory to easily upgrade any enhanced K2 series articulating arm mount with the benefits of the enhanced Centris Extreme Tilt head, which includes a full 75-degrees of tilt up of the monitor and quick-release interface for easy monitor servicing.
Chief KRA226B — Kontour™ KRA226 Center-of-Table Grommet Plate
Use the Kontour™ KRA226 Center-of-Table Grommet Plate accessory for installing a K1C or K2C monitor mount in the center of a table for a great multi-workstation solution. Use up to 4 monitor arms on the column by pairing with a standard K1 or K2 mount and additional KRA221 or KRA222 Expansion Arm kits.
Chief KRA226S — Kontour™ KRA226 Center-of-Table Grommet Plate
Use the Kontour™ KRA226 Center-of-Table Grommet Plate accessory for installing a K1C or K2C monitor mount in the center of a table for a great multi-workstation solution. Use up to 4 monitor arms on the column by pairing with a standard K1 or K2 mount and additional KRA221 or KRA222 Expansion Arm kits.
Chief KRA227B — K1D, K1P, K1S, & K1W Dual Monitor Upgrade Kit, Black
The KRA227 Dual Monitor Upgrade Kit provides a fast & easy means of adding a second arm to any single-arm K1D120, K1P120, K1S120, or K1W120 mount; converting them into a dual-arm K1D220, K1P220, K1S220, or K1W220.
Chief KRA227S — K1D, K1P, K1S, & K1W Dual Monitor Expansion Arm Kit
The KRA227 Dual Monitor Upgrade Kit provides a fast & easy means of adding a second arm to any single-arm K1D120, K1P120, K1S120, or K1W120 mount; converting them into a dual-arm K1D220, K1P220, K1S220, or K1W220.
Chief KRA228B — K2P, K2W Dual Monitor Upgrade Kit, Black
The KRA228 K2 Dual Monitor Upgrade Kit provides a fast & easy means of adding a second arm to any single-arm K2P120 or K2W120 mount; converting them to the dual-arm K2P220 or K2W220.
Chief KRA228S — K2P, K2W Dual Monitor Upgrade Kit, Silver
The KRA228 K2 Dual Monitor Upgrade Kit provides a fast & easy means of adding a second arm to any single-arm K2P120 or K2W120 mount; converting them to the dual-arm K2P220 or K2W220.
Chief KRA231B — K1C and K2C Column Mounted Extreme Tilt Head Accessory, Black
The KRA231 provides a 3rd Extreme Tilt Head for use on any Kontour K1C or K2C mount, for easy upgrade from Dual to Triple Monitor configuration. Easily mounts to the column without impacting the existing installation in any way.
Chief KRA231S — K1C and K2C Column Mounted Extreme Tilt Head Accessory, Silver
The KRA231 provides a 3rd Extreme Tilt Head for use on any Kontour K1C or K2C mount, for easy upgrade from Dual to Triple Monitor configuration. Easily mounts to the column without impacting the existing installation in any way.
Chief KRA300B — KONTOUR™ Laptop Tray Accessory
The KRA300 Laptop Tray accessory provides an elegant & ergonomic solution for everyday laptop use when paired with any of Chief's Kontour™ monitor mounts.  See the Accessories tab below for details on compatible products. Arm not included. Tray accessory only.
Chief KRA300S — KONTOUR™ Laptop Tray Accessory
The KRA300 Laptop Tray accessory provides an elegant & ergonomic solution for everyday laptop use when paired with any of Chief's Kontour™ monitor mounts.  See the Accessories tab below for details on compatible products.
Chief KSA1001B — Wall Plate Accessory
Can be used to quickly change a desk mount into a wall mount.
Chief KSA1002B — Desk Clamp Accessory
Can be used to quickly change a wall mount into a desk mount.
Chief KSA1003B — KSA1003 Extension Arm Accessory
The KSA1003 Extension Arm Accessory provides 6.5" of additional extension for F- and K-series monitor arm mounts and pivot/tilt wall mounts.
Chief KSA1003S — KSA1003 Extension Arm Accessory
The KSA1003 Extension Arm Accessory provides 6.5" of additional extension for F- and K-series monitor arm mounts and pivot/tilt wall mounts.
Chief KSA1004B — Height-Adjustable Extension Arm Accessory
The KSA1004 attaches to any single or dual arm mount to add arm extension and height adjustment capability.
Chief KSA1005B — Security Hardware Kit
The KSA1005 replaces exposed hardware on most small flat panel arm mount configurations with security hardware.
Chief KSA1005S — Security Hardware Kit
The KSA1005 replaces exposed hardware on most small flat panel arm mount configurations with security hardware.
Chief KSA1017B — Pole Clamp Accessory
Quickly changes a wall mount or desk mount for a small flat panel display into a pole mount.
Chief KSA1019B — Centris Turntite Head Accessory
The KSA1019 accessory provides external tilt and roll friction adjustment.
Chief KSA1021B — Keyboard Tray Accessory
The perfect accessory for mounting a keyboard to save valuable desk space at the home or office.
Chief KSA1021S — Keyboard Tray Accessory
The perfect accessory for mounting a keyboard to save valuable desk space at the home or office.
Chief KSA1022B — Wall Track Accessory
The KSA1022 Wall Track Accessory is compatible with Chief's monitor mounts and accessories, and is a great slat wall solution for easy monitor adjustment.
Chief KSA1024B — Centris Quick Connect Bracket
A quick release bracket for small flat panel display mounts. Note: not compatible with Kontour K1 or K2-series mounts.
Chief KSA1250B — Quick-Connect Interface for Dell® Monitors
Use the Chief KSA1250 Quick-Connect Interface for fast & easy tool-free installation of any Dell® monitor to any Chief monitor mount product. Simply click the monitor into place via the Dell® Quick Release slots, and away you go! See the following enhanced Kontour™ products that include the KSA1250 pre-installed for the fastest possible tool-less installation out-of-the-box:
Аксессуар KTA1000 Black
Chief KTA1000S — Pole-Mount Grommet Accessory
Provides a rock-solid bolt down option for the Chief KTA pole accessories, for pole mounted monitor arms and multi-monitor arrays.
Chief KTA1001B — Array Connector
Provides a connection between two array components, for creating extended lengths for larger multiple monitor installations.
Chief KTA1001S — Array Connector
Provides a connection between two array components, for creating extended lengths for larger multiple monitor installations.
Chief KTA1002B — Array Free Standing Base
Free-standing base for multi-monitor applications, when paired with other KTA accessories.
Chief KTA1002S — Array Free Standing Base
Free-standing base for multi-monitor applications, when paired with other KTA accessories.
Chief KTA1003B — Array Dual Pole Clamp
The KTA1003 allows you to attach an additional pole and base to an existing array, or connect two arrays together.
Chief KTA1003S — Array Dual Pole Clamp
The KTA1003 allows you to attach an additional pole and base to an existing array, or connect two arrays together.
Chief KTA1004B — Array Desk Clamp
A desk clamp for installing multi-monitor systems or pole mount swing arms.
Chief KTA1004S — Array Desk Clamp
A desk clamp for installing multi-monitor systems or pole mount swing arms.
Chief KTA1005B — Array Turn-Tite Centris Head
The KTA1005 allows you to add an additional monitor to an existing multi-monitor array installation.
Chief KTA1005S — Array Turn-Tite Centris Head
The KTA1005 allows you to add an additional monitor to an existing multi-monitor array installation.
Chief KTA1007B — Array Large Grommet Accessory
Large Grommet Accessory for mounting pole-mounted multi-monitor arrays to a work surface.
Chief KTA1007S — Array Large Grommet Accessory
Large Grommet Accessory for mounting pole-mounted multi-monitor arrays to a work surface.
Chief KTA1014B — Array 14" Pole
KTA1014 is a 14" Pole for use in creating custom Multi-Monitor Array configurations, or can be paired with any Kontour K1P or K2P-series monitor arm solution.
Chief KTA1014S — Array 14" Pole
KTA1014 is a 14" Pole for use in creating custom Multi-Monitor Array configurations, or can be paired with any Kontour K1P or K2P-series monitor arm solution.
Chief KTA1028B — Array 28" Pole
KTA1028 is a 28" Pole for use in creating custom Multi-Monitor Array configurations, or can be paired with any Kontour K1P or K2P-series monitor arm solution.
Chief KTA1028S — Array 28" Pole
KTA1028 is a 28" Pole for use in creating custom Multi-Monitor Array configurations, or can be paired with any Kontour K1P or K2P-series monitor arm solution.
Chief KTA1036B — Array 36" Pole
KTA1036 is a 36" Pole for use in creating custom Multi-Monitor Array configurations, or can be paired with any Kontour K1P or K2P-series monitor arm solution.
Chief KTA1036S — Array 36" Pole
KTA1036 is a 36" Pole for use in creating custom Multi-Monitor Array configurations, or can be paired with any Kontour K1P or K2P-series monitor arm solution.
Chief KTA1042B — стойка 106,6 см (без основания, для модернизации мультимониторных креплений)
CHIEF KTA1042B Стойка длиной 106,6 см (41'') черная, предназначена для сборки мультимониторных креплений из раздельных элементов
Chief KTA1042S — Array 42" Pole
KTA1042 is a 42" Pole for use in creating custom Multi-Monitor Array configurations, or can be paired with any Kontour K1P or K2P-series monitor arm solution.
Chief KTA220B — Dual Monitor Pole Clamp
View two screens side-by-side on a pole or other Chief KTA product.
Chief KTA220S — Dual Monitor Pole Clamp
View two screens side-by-side on a pole or other Chief KTA product.
Chief KTA225B — Планка поперечная для 2х широкоформатных ЖК-мониторовРаспродажа
CHIEF KTA225B Планка поперечная с тремя 2D-головками для широкоформатных ЖК-мониторов, ширина корпуса 254 - 762мм, цвет черный - предназначена для сборки мультимониторных креплений
Chief KTA225S — Widescreen Dual Monitor Pole Clamp
View two widescreen monitors side-by-side on a pole.
Chief KTA320B — Triple Monitor Pole Clamp
View three screens side-by-side on a pole or other Chief KTA product.
Chief KTA320S — Triple Monitor Pole Clamp
View three screens side-by-side on a pole or other Chief KTA product.
Chief KTA325b — black Планка поперечная с тремя 3D-головками для широкоформатных ЖК-мониторов, ширина корпуса 254 - 635мм - предназначена для сборки мультимониторных крепленийРаспродажа
CHIEF KTA325b black Планка поперечная с тремя 3D-головками для широкоформатных ЖК-мониторов, ширина корпуса 254 - 635мм - предназначена для сборки мультимониторных креплений
Chief KTA325S — Widescreen Triple Monitor Pole Clamp
View three widescreen monitors side-by-side on a pole or other Chief KTA product.
Chief OFBLUB — Lightweight Universal Office Furniture Slatwall Interface
The OFBLU is a universal interface bracket that provides easy installation of any KONTOUR™ or K-series monitor arm wall mount on most major brands of office furniture slatwall.  The OFBLU is Chief's light-weight universal interface and is rated to support monitors up to 25 lbs. total weight. For applications with monitors weighing greater than 25 lbs., use the more heavy-duty OFBU that is rated to support up to 40 lbs. total monitor weight.
Chief OFBLUS — Lightweight Universal Office Furniture Slatwall Interface
The OFBLU is a universal interface bracket that provides easy installation of any KONTOUR™ or K-series monitor arm wall mount on most major brands of office furniture slatwall.  The OFBLU is Chief's light-weight universal interface and is rated to support monitors up to 25 lbs. total weight. For applications with monitors weighing greater than 25 lbs., use the more heavy-duty OFBU that is rated to support up to 40 lbs. total monitor weight.
Chief OFBUB — Universal Office Furniture Slatwall Interface - Single and Multi-Monitor Mounts
The OFBU is a universal interface bracket that provides easy installation of any KONTOUR™ or K-series monitor arm wall mount on most major brands of office furniture slatwall.  The OFBU is Chief's heavy-duty universal interface and is rated to support single or multiple monitors up to 40 lbs. total weight.
Chief OFBUS — Universal Office Furniture Slatwall Interface - Single and Multi-Monitor Mounts
The OFBU is a universal interface bracket that provides easy installation of any KONTOUR™ or K-series monitor arm wall mount on most major brands of office furniture slatwall.  The OFBU is Chief's heavy-duty universal interface and is rated to support single or multiple monitors up to 40 lbs. total weight.

Для проекторов

Chief ASP401 — Individual Control System
The ASP401 is a single pole, double throw (SPDT) switch for use with any Chief electric lift.
Chief CMA100 — 8" (203 mm) Ceiling Plate with Adjustable 1.5" NPT Column, Black
A universal ceiling plate solution for most structural ceiling installations.
Chief CMA100S — 8" (203 mm) Ceiling Plate with Adjustable 1.5" NPT Column, Silver
A universal ceiling plate solution for most structural ceiling installations.
Chief CMA100W — 8" (203 mm) Ceiling Plate with Adjustable 1.5" NPT Column, White
A universal ceiling plate solution for most structural ceiling installations.
Chief CMA101 — CMA101b Потолочная площадка крестиком
Крепеж к потолку CMA101b черный
Chief CMA101s — Потолочная площадка крестикомСпецпредложение
Крепеж к потолку CMA101s Silver
Chief CMA101w — Потолочная площадка крестиком
Крепеж к потолку CMA101w White
Chief CMA105 — 4" (102 mm) Ceiling Plate
Use this ceiling plate with any CMS Fixed or Adjustable Extension Column to customize your installation.
Chief CMA106 — Junction Box Assembly Ceiling Plate
The junction box ceiling plate is designed to suspend a projector between ceiling joists.
Пластина CMA110 Black потолочная квадратная 8" (20см)
Chief CMA110-G — 8" (203 mm) Ceiling Plate, TAA Compliant
Use this flat ceiling plate with any CMS Fixed or Adjustable Extension Column to customize your installation.
Chief CMA110s — Пластина Silver потолочная квадратная 8" (20см)
Пластина CMA110S Silver потолочная квадратная 8" (20см)
Chief CMA115 — black потолочная пластина квадратная 6" (152мм)
Пластина потолочная CHIEF CMA115 Black квадратная 6" (152мм)
Chief CMA115S — 6" (152 mm) Ceiling Plate, Silver
Flat 6" ceiling plate combines with any CMS Fixed or Adjustable Extension Column.Features Includes set screw for easy installation
Chief CMA115W — 6" (152 mm) Ceiling Plate, White
Flat 6" ceiling plate combines with any CMS Fixed or Adjustable Extension Column.Features Includes set screw for easy installation
Chief CMA151 — 1.5" to 1" NPT Adapter
This NPT adapter easily adapts to a 1.5" NPT threaded fitting to a 1" NPT threaded column.
Chief CMA152 — Муфта с отверстием для кабеля Black
Муфта с отверстием для кабеля CHIEF CMA152 Black
Chief CMA160 — Electrical Storage Enclosure
Chief's CMA160 enclosure is designed to make installations quicker, easier and cleaner by providing a compact location for electrical hook-ups, cables and equipment.
Chief CMA165 — Internal Joist Ceiling Kit
Chief's CMA165 Junction Box Adapter makes finished or new construction home projector installations quick and easy.
Chief CMA170 — In-Ceiling Storage Enclosure
This CPU storage accessory can be used to store several different types of equipment in your projector ceiling installation.
Chief CMA170W — Storage Enclosures
Safely conceal an store your AV equipment
Chief CMA210 — 8" (203 mm) Flat Ceiling Plate
DISCONTINUED A flat ceiling plate designed for easy installation with a drop ceiling.Features Use with any length of 2" NPT
Chief CMA260 — Column Tube & Ceiling Plate
DISCONTINUED A column tube and ceiling plate designed for use with Chief's ceiling mounts.Features Provides vertical adjustments in 0.75" (19 mm) increments
Chief CMA270 — Threaded Pipe Coupler
A threaded pipe coupler that connects two 1.5" NPT threaded columns together for added length.
Chief CMA270S — Threaded Pipe Coupler
A threaded pipe coupler that connects two 1.5" NPT threaded columns together for added length.
Chief CMA270W — Threaded Pipe Coupler
A threaded pipe coupler that connects two 1.5" NPT threaded columns together for added length.
Chief CMA273 — Threaded End Cap
This end cap covers the end of an extension column for a clean look.
Chief CMA274 — Кабель-канал CMA274Спецпредложение
Крышка декоративная Chief CMA274, для прокладки кабеля с внешней стороны штанг CPAExxx и CMSxxx, длина 122см., черная
Chief CMA274W — Кабель-канал
Крышка декоративная Chief CMA274W, для прокладки кабеля с внешней стороны штанг CPAExxx и CMSxxx, длина 122см., белая
Chief CMA275 — Крышка защелкивающаяся на штанги CMS (3 секции по 1.2M)Спецпредложение
Крышка CMA275 защелкивающаяся на штанги CMS (3 секции по 1.2M)
Chief CMA278 — Vinyl Cap
This end cap slides over the end of an NPT pipe for a finished look.
Chief CMA290 — Wire Suspension Locks (10pack)
The CMA290 provides a flexible hanging solution for various types of equipment.Features Flexible mounting option for various types of equipment One-way clamp mechanism and quick-release lever for easy installation Includes 10 cable locks Secures equipment via flexible wire rope 0.13” (3 mm) or 0.19” (5 mm) diameter
Площадка CMA330 потолочная с отступом
Chief CMA330-G — 8" (203 mm) Offset Ceiling Plate, TAA Compliant
Allows projector cables to be routed through the extension column and out the top of the ceiling plate for cable management.
Chief CMA340 — Projector Stabilization Kit for Columns
Provides stabilization for projector ceiling installations
Chief CMA345 — Structural Ceiling Plate
A ceiling plate that minimizes the transfer of shock and extreme vibration for projector ceiling installations.
Chief CMA347 — Vibration Isolating Coupler
Reduces projector image movement due to building vibration.
Chief CMA351 — Heavy Duty Swivel Adapter
Allows smooth and safe axis rotation 0-330° and provides the ability to set swivel.
Chief CMA360 — I-Beam Clamp
Adapts a 1.5" NPT column to an I-beam truss from 4"-12" (102-305 mm) width.Features Clamps to I-beams and transitions to vertical extension column TAA Compliant
Chief CMA362 — C-Clamp
A universal clamp for a variety of structures and transitions to vertical extension columns.
Адаптер CMA365 крепления к потолочной ферме сечением до 3``
Chief CMA366 — Architectural Spanning Adapter
Spans truss systems for easy overhead installation of equipment in buildings and exhibit booths.
Chief CMA370 — Unistrut Adapter
Adapts Chief's ceiling plates to 1.63" (41 mm) wide.Features Includes four 0.38" (10 mm) diameter channel nuts with springs and attachment bolts
Chief CMA372 — Offset Unistrut Adapter
Makes installation to all styles of 1.63" Unistrut/U-Channel simple. Ships with spring nuts and bolts for attaching to Unistrut®/U-Channel.
Chief CMA385 — Internal Joist Mount
Expands to bridge ceiling joists on 16"-23" centers
Chief CMA395 — полоточная площадка для наклонного потолка, черная
Адаптер CMA395 Black крепления к наклонному потолку -5/+95 градусов
Chief CMA395-G — Angled Ceiling Plate, TAA Compliant
Perfect for projector installations on an angled ceiling. Pair with the RPAO-G for a full projector solution.
Chief CMA395w — CMA395 полоточная площадка для наклонного потолка, белая
CHIEF CMA395W white потолочная платина для крепления к наклонному потолку -5/+95 градусов (для штанг CMS)
Chief CMA440 — Above Tile Suspended Ceiling Kit
The easiest to install, most economic mounting kit available for suspended ceilings.
Chief CMA440-G — Above Tile Suspended Ceiling Kit, TAA Compliant
The easiest to install, most economic mounting kit available for suspended ceilings.
Chief CMA443 — Above Tile Suspended Ceiling Kit & 3" Fixed Pipe
The easiest to install, most economic mounting kit available for suspended ceilings along with a 3" fixed pipe.
Chief CMA450 — Suspended Ceiling Kit
An easy-to-install 2' x 2' plate (secured by safety wire) that is designed to sit unseen above the suspended ceiling.
Chief CMA455 — Suspended Ceiling Tile Replacement Kit
Designed to replace one 2' x 2' ceiling tile or to sit above the suspended ceiling.
Chief CMA470 — Plenum Rated Above-Tile Storage Accessory
The above-tile storage enclosure for Chief's suspended ceiling kits is designed to provide convenient storage for your cables and equipment.  
Chief CMA471 — Plenum Rated Large Above-Tile Storage Accessory
The above-tile storage enclosure for Chief's suspended ceiling kits is designed to provide convenient storage for your cables and equipment.
Chief CMA472 — Plenum Rated Above-Tile Storage Accessory
The CMA472 is a low-profile enclosure for storing larger equipment above the ceiling.  
Chief CMA473 — XL Plenum Rated Storage Box
The above-tile extra large storage enclosure for Chief's suspended CMS440 and CMA440 is designed to provide convenient storage for your cables and equipment.
Chief CMA474 — SYSAU Plenum Rated Storage Box
Plenum storage system scales and shifts to fit AV equipment and avoid plenum obstructions. Only compatible with the SYS Suspended Ceiling Projector System.
Chief CMA480 — Column Storage Shelf, Black
The CMA480 is a low-profile column shelf with access doors for storing equipment.
Chief CMA480W — Column Storage Shelf, White
The CMA480 is a low-profile column shelf with access doors for storing equipment.
Chief CMA502 — Single Electric Outlet Coupler
Chief's CMA502 provides a convenient location for an outlet to power your flat panel or projector in ceiling mount installations, or a site for low-voltage connections.
Chief CMA504 — Dual Electric Outlet Coupler
The CMA504 provides a convenient location for two outlets to power your flat panel, projector or other related equipment in ceiling mount installations.
Кольцо CMA640 декоративное потолочное на штангу CMS (цвет - сталь)
Chief CMA640b — Кольцо декоративное CMA640
Кольцо Chief CMA640 декоративное потолочное на штангу CMS (цвет черный)
Кольцо CMA640w White декоративное потолочное
Chief CMA643 — декоративное кольцо на раздвижную штангу CMSСпецпредложение
Кольцо CHIEF CMA643 декоративное потолочное на раздвижную штангу CMS (цвет - сталь)
Chief CMA700 — 6" (152 mm) Ceiling Plate with Adjustable Column
This Installation Kit contains all the accessories you need for a complete structural ceiling installation, in one easy-to order, cost-effective kit.
Chief CMA700S — 6" (152 mm) Ceiling Plate with Adjustable Column, Silver
This Installation Kit contains all the accessories you need for a complete structural ceiling installation, in one easy-to order, cost-effective kit.
Chief CMA700W — 6" (152 mm) Ceiling Plate with Adjustable Column, White
This Installation Kit contains all the accessories you need for a complete structural ceiling installation, in one easy-to order, cost-effective kit. (Photo shows black version. Photo of white version not available)
Chief CMS003 — CMS003b штанга черная (7.6см)
Штанга CMS003b Black длина 3" (7.6см)
Chief CMS003s — штанга серебро (7.6см)
Штанга CMS003s Silver длиной 3" (7.6см)
Chief CMS003w — штанга белая (7.6см)
Штанга CMS003w White длиной 3" (7.6см)
Chief CMS006 — Штанга CMS006b Black длина 6" (15.2см)
Штанга CMS006b Black длина 6" (15.2см)
Chief CMS006009 — CMS006009b
Штанга CMS006009b Black регулируемая длиной 6"-9" (15-23cм)
Chief CMS006009s — Штанга 6-9 (15,24 - 22,86 имм)
Штанга CMS006009s Silver регулируемая длиной 6"-9" (15- 23см)
Штанга CMS006009w White с регулируемой длиной 6"-9" (15,24 - 22,86cм)
Chief CMS006s — Штанга Silver длина 6" (15.2см)
Штанга CMS006s Silver длина 6" (15.2см)
Chief CMS006w — Штанга White длина 6" (15.2см)
Штанга CMS006w White длина 6" (15.2см)
Chief CMS009 — Штанга CMS009b длина 9" (22,9 см)
Штанга CMS009b Black длина 9" (22.9см)
Chief CMS009012 — CMS009012b штанга регулируемая 9-12 (23-30.5см)
Штанга CMS009012b Black регулируемая 9-12" (23-30.5см)
Chief CMS009012s — штанга регулируемая 9-12 (23-30.5см)
Штанга CMS009012s Silver регулируемая 9-12" (23-30.5см)
Chief CMS009012w — штанга регулируемая 9-12 (23-30.5см)
Штанга CMS009012w White регулируемая 9-12" (23-30.5cm)
Chief CMS009s — Штанга Silver длина 9" (22.9см)
Штанга CMS009s Silver длина 9" (22.9см)
Chief CMS009w — Штанга White длина 9" (22.9см)
Штанга CMS009w White длина 9" (22.9см)
Chief CMS012 — CMS012b Штанга, длина 12 (304,8 мм)
Штанга CMS012b Black длина 12" (30.5см)
Chief CMS012018 — 12-18" Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS012018S — 12-18" Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS012018W — 12-18" Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS012s — Штанга, длина 12 (304,8 мм)
Штанга CMS012s Silver длина 12" (30.5см)
Штанга CMS012w White длина 12" (30.5см)
Chief CMS018 — CMS-018b Штанга, длина 18 (457,2 мм)
Штанга CMS018b Black длина 18" (45.6см)
Chief CMS018024 — 18-24" Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS018024S — 18-24" Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS018024W — 18-24" Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS018s — CMS-018s Штанга, длина 18 (457,2 мм)
Штанга CMS018s Silver длина 18" (45.6см)
Chief CMS018w — Штанга, длина 18 (457,2 мм)
Штанга CMS018w White длина 18" (45.6см)
Chief CMS0203 — 2-3' Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS0203S — 2-3' Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS0203W — 2-3' Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS024 — CMS024b
Штанга CMS024b Black длина 24" (61cм)
Chief CMS024s — Штанга, длина 24 (609,6 мм)
Штанга CMS024s Silver длина 24" (61cм)
Штанга CMS024w White длина 24" (61cм)
Chief CMS0305 — 3-5' Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS0305S — 3-5' Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS0305W — 3-5' Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS036 — 36" Fixed Extension Column
Save installation time and maximize security with these fixed columns.
Chief CMS036s — Штанга, длина 91,4cм
Штанга CMS036s Silver длина 36" (91.4см)
Chief CMS036w — штанга, длина 91,4cм
Штанга CMS036w White длина 36" (91.4cм)
Chief CMS0406 — 4-6' Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS0406S — 4-6' Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS0406W — 4-6' Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS048 — CMS048b
Штанга CMS048b Black длиной 48" (1.2M)
Штанга CMS048s Silver длиной 48" (1.2M)
Chief CMS048w — Штанга White длиной 48" (1.2M)
Штанга CMS048w White длиной 48" (1.2M)
Chief CMS0507 — 5-7' Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS0507S — 5-7' Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS0507W — 5-7' Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS060 — CMS060b штанга 60 (1.5M)
Штанга CMS060b Black длиной 60" (1.5M)
Chief CMS0608 — 6-8' Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS0608S — 6-8' Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS0608W — 6-8' Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS060s — штанга 60 (1.5M)
Штанга CMS060s Silver длиной 60" (1.5M)
Chief CMS060w — Штанга White длиной 60" (1.5M)
Штанга CMS060w White длиной 60" (1.5M)
Chief CMS0709 — 7-9' Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS0709S — 7-9' Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS0709W — 7-9' Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS072 — 72" Fixed Extension Column
Save installation time and maximize security with these fixed columns.
Chief CMS072S — 72" Fixed Extension Column
Save installation time and maximize security with these fixed columns.
Chief CMS072W — 72" Fixed Extension Column
Save installation time and maximize security with these fixed columns.
Chief CMS0810 — 8-10' Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS0810S — 8-10' Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS0810W — 8-10' Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS0911 — 9-11' Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS0911S — 9-11' Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS0911W — 9-11' Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS1012 — 10-12' Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS1012S — 10-12' Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS1012W — 10-12' Adjustable Extension Column
Save installation time and maximize security with these adjustable columns.
Chief CMS115 — CMS115b потолочная площадка круглая
Площадка CMS115b Black потолочная круглая
Chief CMS115s — Потолочная площадка круглая
Площадка CMS115s Silver потолочная круглая
Площадка CMS115w белый потолочная
Chief CMS1RU — 1RU Rack Mount Brackets
The CMS1RU enables mounting 1RU x 19" rack sized electronics inside the 2' x 2' CMS492 and CMS492C plenum rated storage boxes.  The 1RU rack brackets simply assemble to the AV component shelf.   Two CMS1RU's can be mounted inside the CMS492C.
Chief CMS261 — Column Cut-Off Adapter
This accessory attaches to Chief extension columns that have been cut to length.
Chief CMS261W — Column Cut-Off Adapter
This accessory attaches to Chief extension columns that have been cut to length.
Chief CMS390 — 16" (406 mm) Dual Joist Ceiling Mount
The dual joist ceiling adapter provides the ultimate in placement flexibility.
Chief CMS391 — 24" (609 mm) Dual Joist Ceiling Mount
The dual joist ceiling adapter provides the ultimate in placement flexibility.
Набор CMS440 для монтажа на тросах за подвесной потолок (595*203мм, служит основанием для вкручивания штанги CMS)
Chief CMS440N — Suspended Ceiling Projector Mount Kits
This ceiling tile kit provides a host features that make installing most lightweight front projectors faster and more secure. Combines the CMS440 suspended ceiling kit with a power outlet housing that is ready for power outlet installation. 
Chief CMS440P — Lightweight Suspended Ceiling Kit with Power Outlet Conditioner
A high-performance power accessory that integrates with Chief mounts and improves the audio and video performance of projectors. Combines the CMS440 suspended ceiling kit with the PX2W high-performance power outlet conditioner. US and Canada only. DISCONTINUED. See CMS440P2 for replacement.
Chief CMS440P2 — SpeedConnect Above-Tile Suspended Ceiling Kit with 2-Gang Filter & Surge
This above ceiling tile kit provides a host features that make installing most lightweight front projectors faster and more secure. Includes a high-performance, dual gang housing, isolated ground, dual receptacle outlet featuring the SurgeX® non-sacrificial multi-stage filtration and surge protection system. This protects equipment from disruptive high frequency noise and damage caused by power disturbances.Chief's powered solutions were co-developed with SurgeX, a brand of AMETEK® Electronic Systems Protection.Column and projector mount not included, must be purchased separately.
Chief CMS443 — Extension Column and Ceiling Mount Kit
Combines 2 great products: A suspended ceiling kit and a 3" (76 mm) extension column, in an easy-to-order package.
Набор CMS445 для монтажа на тросах за подвесной потолок (600*600мм, служит основанием для вкручивания штанги CMS)
Chief CMS445N — Speed-Connect Suspended Ceiling Tile Replacement Kit with Power Outlet Housing
This kit provides features that make installing most lightweight front projectors faster and more secure. Combines the CMS445 suspended ceiling tile replacement kit with a power outlet housing that is ready for power outlet installation. 
Chief CMS445P — Suspended Ceiling Replacement Kit with Power Outlet Conditioner
A high-performance power accessory that integrates with Chief mounts and improves the audio and video performance of projectors. Combines the CMS445 suspended ceiling kit with the PX2W high-performance power outlet conditioner. US and Canada only. DISCONTINUED. See CMS445P2 for replacement.
Chief CMS445P2 — SpeedConnect Suspended Ceiling Tile Replacement Kit with 2-Gang Filter & Surge
This ceiling tile replacement kit provides a host features that make installing most lightweight front projectors faster and more secure. Includes a high-performance, dual gang housing, isolated ground, dual receptacle outlet featuring the SurgeX® non-sacrificial multi-stage filtration and surge protection system.
Chief CMS490 — Plenum Rated Ceiling Tile Storage Kit
The CMS490 conceals AV equipment above a 2' X 2' ceiling tile and has a textured finish to provide a clean professional look for classrooms and conference rooms.  Discontinued. See CMS492 for replacement. Features Simple 3-step installation Suspend frame with WireVice Cables Snap housing into frame Attach AV tray
Chief CMS491 — 1' x 2' Plenum Rated Storage Box
The CMS491 conceals AV equipment above a 2' X 2' ceiling tile to provide a clean professional look for classrooms and conference rooms. 
Chief CMS491C — Бокс для АВ оборудования 60х30 для монтажа на тросах за подвесной потолок с гнездом для штанг CMS, нагрузка до 45 кг.
Chief CMS491CP2 — 1' x 2' Plenum Rated Storage Box and Column Drop with 2-Gang Filter & Surge
The CMS491CP2 conceals AV equipment above a 2' X 2' ceiling tile and supports a 1.5" NPT column drop for mounting projectors within the same tile grid providing a clean professional look for classrooms and conference rooms. Includes a high-performance, dual gang housing, isolated ground, dual receptacle outlet featuring the SurgeX® non-sacrificial multi-stage filtration and surge protection system.
Chief CMS491P2 — 1' x 2' Plenum Rated Storage Box with 2-Gang Filter & Surge
The CMS491P2 conceals AV equipment above a 2' X 2' ceiling tile to provide a clean professional look for classrooms and conference rooms. Includes a high-performance, dual gang housing, isolated ground, dual receptacle outlet featuring the SurgeX® non-sacrificial multi-stage filtration and surge protection system. This protects equipment from disruptive high frequency noise and damage caused by power disturbances.Chief's powered solutions were co-developed with SurgeX, a brand of AMETEK® Electronic Systems Protection.
Chief CMS492 — Бокс для АВ оборудования 60х60 для монтажа на тросах за подвесной потолок CMS492, нагрузка до 45 кг.
Chief CMS492C — бокс 60х60 для монтажа на тросах за подвесной потолок, с гнездом для штанги CMS
Chief CMS492CP2 — 2' x 2' Plenum Rated Storage Box and column drop with 2-Gang Filter & Surge
The CMS492CP2 conceals AV equipment above a 2' X 2' ceiling tile and supports a 1.5" NPT column drop for mounting projectors within the same tile grid providing a clean professional look for classrooms and conference rooms.Includes a high-performance, dual gang housing, isolated ground, dual receptacle outlet featuring the SurgeX® non-sacrificial multi-stage filtration and surge protection system.
Chief CMS492P2 — 2' x 2' Plenum Rated Storage Box with 2-Gang Filter & Surge
The CMS492P2 conceals AV equipment above a 2' X 2' ceiling tile to provide a clean professional look for classrooms and conference rooms. Includes a high-performance, dual gang housing, isolated ground, dual receptacle outlet featuring the SurgeX® non-sacrificial multi-stage filtration and surge protection system. This protects equipment from disruptive high frequency noise and damage caused by power disturbances.Chief's powered solutions were co-developed with SurgeX, a brand of AMETEK® Electronic Systems Protection.
Chief CMS495 — Angled Suspended Ceiling Kit Adapter
This simple accessory allows for projectors and flat panel TV's to hang level from an angled suspended ceiling.  Designed for use with the CMS440. 
Chief CMSFAN — Plenum Rated Fan Kit
This 12V DC Fan kit provides the necessary cooling needed for AV components stored in above tile ceiling applications. 
Chief CMSH3 — Column Height Adjust Accessory (3")
The CMSH3 allows for rapid image alignment for projectors & flat panels. Press the button for a macro adjustment and then use the micro adjust dial to fine tune the image.  DISCONTINUEDFeatures Enables rapid image alignment  Features 2-stage precision height adjustment (3" Macro adjustment button Micro adjustment dia  For use with CMS columns  
Chief CMSH3S — Column Height Adjust Accessory (3")
The CMSH3S allows for rapid image alignment for projectors & flat panels. Press the button for a macro adjustment and then use the micro adjust dial to fine tune the image. DISCONTINUED. Features Enables rapid image alignment   Features 2-stage precision height adjustment (3"Macro adjustment button Micro adjustment dia  
Chief CMSUNV1 — 1' x 2' AV Component Shelf
The CMSUNV1 can be ordered to add an additional shelf to the CMS491 1' x 2' plenum rated storage box.  
Chief CMSUNV2 — 2' x 2' AV Component Shelf
The CMSUNV2 can be ordered to add an additional shelf to the CMS492 2' x 2' plenum rated storage box. 
Chief CMSUNVU — AV Storage Adapter for CMA473
The CMSUNVU assists in keeping AV components suspended, ventilated, and organized within the CMA473 plenum rated storage housing.Features DM-RMC-SCALER-C TAA Compliant
Chief CMSZ006 — Штанга Black, резьба по всей длине (15.2см), для использования с CMS440, CMS445
Штанга CHIEF CMSZ006 Black, резьба по всей длине (15.2см), для использования с CMS440, CMS445
Chief CMSZ006S — Fully Threaded Column 0-6" (0-152 mm)
A threaded column provides infinite height adjustment from suspended ceiling kits.
Chief CPA018 — Pin Connection Column 18" (45.7 cm)
Chief's new CPA column system hosts many installation inspired features along with an aesthetic finish.  Available in black and silver.
Chief CPA024 — Pin Connection Column 24" (61 cm)
Chief's new CPA column system hosts many installation inspired features along with an aesthetic finish.  Available in black and silver.
Chief CPA036 — Pin Connection Column 36" (91.2 cm)
Chief's new CPA column system hosts many installation inspired features along with an aesthetic finish.  Available in black and silver.
Chief CPA048 — Pin Connection Column 48" (121.9 cm)
Chief's new CPA column system hosts many installation inspired features along with an aesthetic finish.  Available in black and silver.
Chief CPA048P — Pre-Drilled Pin Connection Column 48" (121.9 cm)
The CPA048P is a 4ft column with pre-drilled holes throughout the length of the column in 1" increments.  Having the holes pre-drilled helps save time during installation.
Chief CPA060 — Pin Connection Column 60" (152.4 cm)
Chief's new CPA column system hosts many installation inspired features along with an aesthetic finish.  Available in black and silver.
Chief CPA072 — Pin Connection Column 72" (182.9 cm)
Chief's new CPA column system hosts many installation inspired features along with an aesthetic finish.  Available in black and silver.
Chief CPA072P — Pre-Drilled Pin Connection Column 72" (182.9 cm)
The CPA072P is a 6ft column with pre-drilled holes throughout the length of the column in 1" increments.  Having the holes pre-drilled helps save time during installation.
Chief CPA096 — Pin Connection Column 96" (243.8 cm)
Chief's new CPA column system hosts many installation inspired features along with an aesthetic finish.  Available in black and silver.
Chief CPA116 — Пластина потолочная
Пластина потолочная Chief CPA116, нагрузка до 22,7кг., для штанг CPAExxx, черная
Chief CPA116W — Пластина потолочная
Пластина потолочная Chief CPA116W, нагрузка до 22,7кг., для штанг CPAExxx, белая
Chief CPA120 — Pin Connection Column 120" (304.8 cm)
Chief's new CPA column system hosts many installation inspired features along with an aesthetic finish.  Available in black and silver.
Chief CPA261 — Pin Connection Accessories
The CPA261 coupler is used to transition LCM Video Wall products to a 1.5" NPT threaded column. 
Chief CPA262 — Pin Connection Accessories
Use the CPA262 coupler to transition from a CPA pin connection column to a 1.5" NPT female threaded connection.   Features TAA Compliant
Chief CPA263 — Pin Connection Union Connector
Use the CPA263 to join 2 CPA columns.Features TAA Compliant
Chief CPA264 — Pin Connection Coupler
Use the CPA264 to connect CPA columns to 1.5" threaded Columns.Features TAA Compliant
Chief CPA330 — потолочная пластина адаптер для крепления штанги
Chief CPA365 — потолочный адаптер для крепления на двух стяжках на балку сечением до 3``
Адаптер CPA365 крепления к потолочной ферме сечением до 3``
Chief CPA395 — потолочная пластина
Потолочная площадка CHIEF CPA395
Chief CPA640 — Decorative Tile Ring
The CPA640 provides a clean finish when mounting CPAE columns through a ceiling tile.Features COMPATIBILITYCompatible with all CMS & CPAE columns, KITEC projector kits and CMA274 quick-snap cable covers
Chief CPA640W — Decorative Tile Ring
The CPA640W provides a clean finish when mounting CPAE columns through a ceiling tile.Features COMPATIBILITYCompatible with all CMS & CPAE columns, KITEC projector kits and CMA274 quick-snap cable covers
Chief CPAE030 — штанга-удлинитель длина 30смСпецпредложение
CPAE030 штанга-удлинитель длина 30см
Chief CPAE030w — штанга-удлинитель длина 30см
CPAE030w штанга-удлинитель длина 30см
Chief CPAE080 — штанга-удлинитель длина 80см
CPAE080 штанга-удлинитель длина 80см
Chief CPAE080w — штанга-удлинитель длина 80см
CPAE080w штанга-удлинитель длина 80см
Chief CPAE100 — Pin Connection Column 100 cm
CPAE columns were designed specifically for use in Europe, the Middle East and Africa and are only available in those regions. CPAE columns feature convenient pin-connections for a fast installation and a quick service external cable management.Features EXTERNAL CABLE MANAGEMENTQuick Service external cable management eliminates the need to pre-route cables. Inlay style allows cables to be easily installed or removed for serviceability FLEXIBLE INVENTORY Can be cut to length to customize your installation, can be re-drilled
Chief CPAE100W — Pin Connection Column 100 cm
CPAE columns were designed specifically for use in Europe, the Middle East and Africa and are only available in those regions.  CPAE columns feature convenient pin-connections for a fast installation and a quick service external cable management. Features EXTERNAL CABLE MANAGEMENTQuick Service external cable management eliminates the need to pre-route cables. Inlay style allows cables to be easily installed or removed for serviceability.
Chief CPAE150 — штанга-удлинитель длина 150см
CPAE150 штанга-удлинитель длина 150см
Chief CPAE150w — штанга-удлинитель длина 150см
CPAE150w штанга-удлинитель длина 150см
Chief CPAE300 — штанга-удлинитель длина 3m
CPAE300 штанга-удлинитель длина 3m
Chief CPAE300w — штанга-удлинитель длина 3m
CPAE300w штанга-удлинитель длина 3m
Chief HC1 — Heavy-Duty Cable System
A heavy-duty cable system that provides added security to projector installations.
Chief IR10 — IR10Спецпредложение
Пульт IR10 инфракрасный для Chief SL150/SL151, SL236
Chief LC1 — Cable Lock Kit
The perfect kit for adding extra security to your mounting solution.Features Includes coiled cable that extends 6' (1.83 m), two steel security pads, a 2 gram tube of super glue gel and a 30 mm padlock
Chief LPK1 — Low-Profile Flush Mounting Kit
The LPK1 provides flush mounting to the ceiling, without loss of the X-Y movement.Features Attaches to the top of the VCM
Chief LSB100 — Lateral Shift Bracket for LCD/DLP Projector Mounts
Provides 3" (76 mm) right/left lateral adjustment to center the lens. Compatible with RPA Series mounts. For RPM Elite Series with Q-lock feature, use the LSB101.
Chief LSB101 — Lateral Shift Bracket for RPM with Q-Lock
The LSB101 lateral shift bracket provides 3” (76 mm) of right/left or front/back adjustment for Chief RPA Elite Series mounts with Q-lock.
Chief PG1A — Large Projector Security Cage
A top security solution that fully encloses the projector mount in a locked steel cage to prevent theft, as well as recreational damage. NOT COMPATIBLE WITH VCM SERIES. 
Chief PG1AW — Large Projector Security Cage
A top security solution that fully encloses the projector mount in a locked steel cage to prevent theft, as well as recreational damage. NOT COMPATIBLE WITH VCM SERIES. 
Chief PG2A — Small Projector Security Cage
A top security solution that fully encloses the projector mount in a locked steel cage to prevent theft, as well as recreational damage. NOT COMPATIBLE WITH VCM SERIES. 
Chief PG2AW — Small Projector Security Cage
A top security solution that fully encloses the projector mount in a locked steel cage to prevent theft, as well as recreational damage. NOT COMPATIBLE WITH VCM SERIES. 
Chief PG3A — Extra Large Projector Security Cage
A top security solution that fully encloses the projector mount in a locked steel cage to prevent theft, as well as recreational damage. Only compatible with RPA & RPM Series.  NOT COMPATIBLE WITH VCM SERIES. 
Chief PG3AW — Extra Large Projector Security Cage
A top security solution that fully encloses the projector mount in a locked steel cage to prevent theft, as well as recreational damage.  Only compatible with RPA & RPM series. Not compatible with VCM series. Three sizes are available; see PG1A or PG2 for different sized enclosures.
Chief PL1A — PL1AСпецпредложение
Рамка PL1A с замком на крепление проектора
Chief PL1B — Large RPA Series Projector (Lock B)
Provide extra defense against theft beyond standard All-Points Security without the extreme of enclosing the entire projector. Available in three key configurations PL1A, PL1B or PL1C. See the PL2 for use with smaller projector models.
Chief PL1C — Large RPA Series Projector (Lock C)
Provide extra defense against theft beyond standard All-Points Security without the extreme of enclosing the entire projector. Available in three key configurations PL1A, PL1B or PL1C. See the PL2 for use with smaller projector models.
Chief PL2A — Small RPA Series Projector (Lock A)
The PL2 provides extra defense against theft beyond Chief’s standard All-Points Security without the extreme of enclosing the entire projector mount. Available in three key options: PL2A, PL2B, PL2C See the PL1 for use with larger projector models
Chief PL2B — Small RPA Series Projector (Lock B)
The PL2 provides extra defense against theft beyond Chief’s standard All-Points Security without the extreme of enclosing the entire projector mount. Available in three key options: PL2A, PL2B, PL2C See the PL1 for use with larger projector models
Chief PL2C — Small RPA Series Projector (Lock C)
The PL2 provides extra defense against theft beyond Chief’s standard All-Points Security without the extreme of enclosing the entire projector mount. Available in three key options: PL2A, PL2B, PL2C See the PL1 for use with larger projector models
Chief PL4 — Projector Cable Lock
Secure projectors in high-risk installations. Made from aircraft aluminum with two keys provided. 3M™ adhesive sercure the lock to the projector.
Chief PMSC — Security Cable Kit
The PMSC helps to deter theft attempts. For use with the RPA and RPA Elite Security Series.Features Two cable and lock sets wrap around the underside of the projector for enhanced security
Chief SA1 — Security Anchor
This security anchor is the perfect way to turn your projector's NPT pipe into a security anchor point. Seamless, aircraft aluminum construction.
Chief SEC2 — SEC2 Security Cable Kit
The SEC2 Security Cable Kit is designed for use with Chief® Series Projector Mounts. See the specific installation instructions provided withthe mount for additional installation information.Features Included: (2) 1/16 x 18" Cables Included:(2) Cable Support Connectors
Chief SMA601 — 1.5" NPT Mounting Plate for SL236
The SMA-601 mounting plate allows you to attach the Smart-Lift  to a 1-1/2" NPT threaded pipe. Compatible with SL236 Features Specifications Shipping Weight: 26.86
Chief SMA602 — 1.5" NPT Mounting Plate for SL151
The SMA-602 mounting plate allows you to attach the Smart-Lift to a 1-1/2" NPT threaded pipe.
Chief SMA620 — Track Clip
The SMA-620 suspended ceiling track clip allows you to secure ceiling grid to the Smart-Lift SL-236 forsuspended ceiling applications.
Chief SMA651 — Hanging Rod Adapter
The SMA-651 installation adapter kit allows you to attach the Smart-Lift (model SL-236) to threaded rods or cables for suspended ceiling mounting applications.
Chief TMA100 — Projector Mount Converter
Converts a standard tri-pod into a projector stand. Compatible only with RPA projector mounts. Extension column and ceiling plate are not included, order separately to fit your specific installation requirements Discontinued April 1, 2015
Chief WMAC16 — Wall cover
Use the WMAC16 to improve the aesthetics of your wall mount installation by hiding outlets, amplifiers, switchers …etc. Also use for storing extra cables.
Chief WMAH3S — Wall Mount Height Adjust Accy 3"
The WMAH3 allows for rapid image alignment for your short throw projection image.  Press the button for a macro adjustment and then use the micro adjust dial to fine tune the projection image.  Also works for long throw projectors.Features Enables rapid image alignment   Features 2-stage precision height adjustment (3") Macro adjustment button  Micro adjustment dia  
Chief WMAL106 — 106" Lateral Shift Accessory
Use the WMAL106 for attaching multiple projectors across a 106" span. Can be used for video wall applications.  A great solution for blending multiple projection images.Discontinued, replaced with WMAL24Features For use with the following models:
Chief WMAL24 — 24" Lateral Shift Accessory
Use the WMAL24 for mounting to 24" studs or for gaining additional lateral shift.
Chief WMAL72 — 72" Lateral Shift Accessory
Use the WMAL72 for attaching multiple projectors across a 6ft span. Can be used for video wall applications. Discontinued, replaced with WMAL24

Для стоек

Chief 4FANGUARD — Fan Guard for 4.5" Fans
Use this fan guard to prevent mishaps with an open fan in your rack. Use with 4.5" fans (FAN or FAN/QUIET)Features Compatible with FAN and FAN/QUIET
Chief AFG-1 — 1U Aluminum Blank Panel - Flanged
1U blank panel ideal for closing up gaps in rack equipment. Brushed black anodized aluminum for a professional finish. Flanged for extra strength.Features 0.06" thick aluminum. 1/2" return flange. Brushed finish matches popular electronics finishes. TAA Compliant
Chief AFG-2 — 2U Aluminum Blank Panel - Flanged
2U blank panel ideal for closing up gaps in rack equipment. Brushed black anodized aluminum for a professional finish. Flanged for extra strength.Features 0.06" thick aluminum. 1/2" return flange. Brushed finish matches popular electronics finishes. TAA Compliant
Chief AFG-3 — 3U Aluminum Blank Panel - Flanged
3U blank panel ideal for closing up gaps in rack equipment. Brushed black anodized aluminum for a professional finish. Flanged for extra strength.Features 0.06" thick aluminum. 1/2" return flange. Brushed finish matches popular electronics finishes. TAA Compliant
Chief AFG-4 — 4U Aluminum Blank Panel - Flanged
4U blank panel ideal for closing up gaps in rack equipment. Brushed black anodized aluminum for a professional finish. Flanged for extra strength.Features 0.06" thick aluminum. 1/2" return flange. Brushed finish matches popular electronics finishes. TAA Compliant
Chief AFT-1 — 1U Aluminum Blank Panels - Flat
1U blank panel ideal for closing up gaps in rack equipment. Brushed black anodized aluminum for a professional finish.Features 0.080" thick aluminum. Brushed finish matches popular electronics finishes. TAA Compliant
Chief AFT-2 — 2U Aluminum Blank Panels - Flat
2U blank panel ideal for closing up gaps in rack equipment. Brushed black anodized aluminum for a professional finish.Features 0.080" thick aluminum. Brushed finish matches popular electronics finishes. TAA Compliant
Chief AFT-3 — 3U Aluminum Blank Panels - Flat
3U blank panel ideal for closing up gaps in rack equipment. Brushed black anodized aluminum for a professional finish.Features 0.080" thick aluminum. Brushed finish matches popular electronics finishes. TAA Compliant
Chief AFT-4 — 4U Aluminum Blank Panels - Flat
4U blank panel ideal for closing up gaps in rack equipment. Brushed black anodized aluminum for a professional finish.Features 0.080" thick aluminum. Brushed finish matches popular electronics finishes. TAA Compliant
Chief AMSL — Large Attachable Music Stand (Discontinued)
Quickly attach a music stand to your microphone base with this large attachable music stand. DISCONTINUED JULY, 2014. Features 9.75" X 7.5" sheet music support. Clamp design quickly and securely attached to a microphone stand. Durable powder coated finish.
Chief AMSS — Small Attachable Music Stand
Quickly attach a music stand to your microphone base with this small attachable music stand.Features 5" X 7.5" sheet music support. Clamp design quickly and securely attached to a microphone stand. Durable powder coated finish.
Chief AR-5 — Accessory Riser
Accessory rise for amp handle or mic stand. Holds tuners or other small devices.Features Modular system allows the combination of desks and sidewings to make a complete work solution. Made of durable steel and laminated particle board for years of service.
Chief ATS-16-26 — Adjustable Telescoping Shelf
Steel shelf connects to front and rear rack rail for supporting heavy components. Shelf surface is ventilated for great thermal management.Features TAA Compliant
Chief BAN-1A — Modular Panels for Banana Jacks (Discontinued)
Modular system panels designed to fit banana jack connectors.   DISCONTINUED July, 2014Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief BAN-2A — Modular Panels for Banana Jacks (Discontinued)
Modular system panels designed to fit banana jack connectors.   DISCONTINUED July, 2014Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief BAN-3A — Modular Panels for Banana Jacks (Discontinued)
Modular system panels designed to fit banana jack connectors.   DISCONTINUED July, 2014Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief BAN-4A — Modular Panels for Banana Jacks (Discontinued)
Modular system panels designed to fit banana jack connectors.   DISCONTINUED July, 2014Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief BNC-1A — Modular Panels for BNC Connectors (Discontinued)
Modular system panels designed to fit 1 BNC connector.   DISCONTINUED July, 2014Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief BNC-2A — Modular Panels for BNC Connectors (Discontinued)
Modular system panels designed to fit 2 BNC connectors.   DISCONTINUED July, 2014Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief BNC-3A — Modular Panels for BNC Connectors (Discontinued)
Modular system panels designed to fit 3 BNC connectors.   DISCONTINUED July, 2014Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief BNC-4A — Modular Panels for BNC Connectors (Discontinued)
Modular system panels designed to fit 4 BNC connectors.   DISCONTINUED July, 2014Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief BNC-8A — Modular Panels for BNC Connectors (Discontinued)
Modular system panels designed to fit 8 BNC connectors.   DISCONTINUED July, 2014Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief CAN-1A — Modular system panels designed to fit 1 Canare connector (Discontinued)
Modular system panels designed to fit 1 Canare connector. DISCONTINUED JULY, 2014Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief CAN-2A — Modular Panels for Canare Connectors (Discontinued)
Modular system panels designed to fit 2 Canare connectors. DISCONTINUED JULY, 2014Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief CAN-3A — Modular Panels for Canare Connectors (Discontinued)
Modular system panels designed to fit 3 Canare connectors. DISCONTINUED JULY, 2014Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief CAN-4A — Modular Panels for Canare Connectors (Discontinued)
Modular system panels designed to fit 4 Canare connectors. DISCONTINUED JULY, 2014Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief CASTER-ER/ERK — ER/ERK casters
ER/ERK casters
Chief CBLD — Cable Depot
Cable depot keeps up to 42 cables ready and organized. 14 slots each accept cables up to 0.25" diameter.Features Finished in durable smooth black powder coat. Made of 16-guage steel.
Chief CBS — Center Bridge Support for Config-u-Raxx Rack Bridges
Add extra support to any rack bridge carrying a heavy load. Attaches in the center and helps distribute weight along the entire shelf.     Config - U - Raxx products and accessories will be discontinued January, 1st 2014
Chief CDP — CD Partition
Dividers for compact discs fit into 4U ESD or SDR drawers. Holds approximately 103 CDs Discontinued
Chief CKW — Speaker Grill Clamp Kit
Clamp kit for speaker grills (set of 4 clamps).
Chief CLS-A — Casework Vent System
Vent system for rack and casework ventilation includes two fans and variable speed power supply. Mounts into a 3" diameter hole. Discontinued April 1, 2015
Chief CMP-1C — Cable Management Panels
An ideal solution for horizontally managing bundles of cables. This 1U panel's unique set of rings allow for quick organization and re-routing of cables. Large cable loops allow for larger bundles of cables.
Chief CMP-1M — Cable Management Panels
An ideal solution for horizontally managing bundles of cables. This 1U panel's unique set of rings allow for quick organization and re-routing of cables. Small cable loops keep bundles of cables neat.
Chief CPROTRD-35 — Steel Door for CPROTR-35 Rack
Doors for the CPROTR-35 in solid steel.Features Solid steel door controls access and eliminates visibility of equipment loaded into rack.
Chief CPROTRD-35P — Perforated Steel Door for CPROTR-35 Rack
Doors for the CPROTR-35 in perforated steel.Features Perforated steel improves ventilation in passively cooled racks.
Chief CPROTRD-35PLX — Acrylic Door for CPROTR-35 Rack
Doors for the CPROTR-35 in acrylic.Features Acrylic has a smoke finish.
Chief CPROTRD-42 — Steel Door for CPROTR-42 Rack
Doors for the CPROTR-42 in solid steel.Features Solid steel door controls access and eliminates visibility of equipment loaded into rack.
Chief CPROTRD-42P — Perforated Steel Door for CPROTR-42 Rack
Doors for the CPROTR-42 in perforated steel.Features Perforated steel improves ventilation in passively cooled racks.
Chief CPROTRD-42PLX — Acrylic Door for CPROTR-42 Rack
Doors for the CPROTR-42 in acrylic.Features Acrylic has a smoke finish.
Chief CT-100-12 — 12" Cable Ties
100 pieces of 12" plastic cable ties. Ties lock solidly to organize bundles of cables.
Chief CT-100-15 — 15" Cable Ties
100 pieces of 15" plastic cable ties. Ties lock solidly to organize bundles of cables.
Chief CT-100-4 — 4" Cable Ties
100 pieces of 4" plastic cable ties. Ties lock solidly to organize bundles of cables.
Chief CT-100-8 — 8" Cable Ties
100 pieces of 8" plastic cable ties. Ties lock solidly to organize bundles of cables.
Chief CT-100-8R — 8" Removable Cable Ties
100 pieces of 8" plastic cable ties. Ties lock solidly to organize bundles of cables, but can be removed by simply pushing up on a locking lever.
Chief DB-25-1A — Modular Panels for DB25 and SCSI Connectors (Discontinued)
Modular system panels designed to fit 1 DB25 or SCSI connector. DISCONTINUED JULY, 2014Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief DB-25-2A — Modular Panels for DB25 and SCSI Connectors (Discontinued)
Modular system panels designed to fit 2 DB25 or SCSI connectors. DISCONTINUED JULY, 2014Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief DB-25-3A — Modular Panels for DB25 and SCSI Connectors (Discontinued)
Modular system panels designed to fit 3 DB25 or SCSI connectors. DISCONTINUED JULY, 2014Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief DB-9-2A — Modular Panels for DB9 Connectors
Modular system panels designed to fit 2 DB9 connectors. DISCONTINUED JULY, 2014Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief DCR-1X1 — 1U Rack Panel for 1 Decora Devices
1U rack panel that features a punch-out for 1 Decora device.Features 16 gauge steel panel. Accepts any Decora® device.
Chief DCR-1X2 — 1U Rack Panel for 2 Decora Devices
1U rack panel that features a punch-out for 2 Decora devices.Features 16 gauge steel panel. Accepts any Decora® device.
Chief DCR-1X3 — 1U Rack Panel for 3 Decora Devices
1U rack panel that features a punch-out for 3 Decora devices.Features 16 gauge steel panel. Accepts any Decora® device.
Chief DCR-1X4 — 1U Rack Panel for 4 Decora Devices
1U rack panel that features a punch-out for 4 Decora devices.Features 16 gauge steel panel. Accepts any Decora® device.
Chief DCR-3X3 — 3U Rack Panel for 3 Decora Devices
3U rack panel that features a punch-out for 3 Decora devices.Features 16 gauge steel panel. Accepts any Decora® device.
Chief DCR-3X4 — 3U Rack Panel for 4 Decora Devices
3U rack panel that features a punch-out for 4 Decora devices.Features 16 gauge steel panel. Accepts any Decora® device.
Chief DCR-3X6 — 3U Rack Panel for 6 Decora Devices
3U rack panel that features a punch-out for 6 Decora devices.Features 16 gauge steel panel. Accepts any Decora® device.
Chief DL — Foam Drawer Liner
Foam drawer liner provides cushioning to the bottom of any ESD or SDR drawer. DISCONTINUED
Chief DVDP — DVD Partition
Dividers for DVDs fit into 3U and 4U ESD or SDR drawers. Holds approximately 40 DVDs Discontinued
Chief ECR-12\16STPS — Podium Shelf for Steel Elite Converta Racks
Steel podium shelf converts the top mixer rack of the ECR-12/16ST into a podium
Chief ECR-CH/SHELF — Side Shelf for Elite Converta Rack
Flip-up side shelf for the ECR racks in Cherry laminate
Chief ECR-WT/SHELF — Side Shelf for the Elite Converta Rack
Flip-up side shelf for the ECR racks in Walnut laminate
Chief EFG-1 — заглушка 1UСпецпредложение
Chief EFG-2 — заглушка 2UСпецпредложение
Chief EFG-3 — 3U Economy Steel Blank Panel - Flanged
3U steel panel with flanges for extra strength. Fills gaps in your rack for a seamless, professional appearance and improved thermal management.Features Smooth black powder coated steel. 1/2" return flange. TAA Compliant
Chief EFG-4 — 4U Economy Steel Blank Panel - Flanged
4U steel panel with flanges for extra strength. Fills gaps in your rack for a seamless, professional appearance and improved thermal management.Features Smooth black powder coated steel. 1/2" return flange. TAA Compliant
Chief EFT-1 — 1U Economy Steel Blank Panel - Flat
1U steel panels fill gaps in your rack for a seamless, professional appearance and improved thermal management.Features Smooth black powder coated steel. TAA Compliant
Chief EFT-2 — 2U Economy Steel Blank Panel - Flat
2U steel panels fill gaps in your rack for a seamless, professional appearance and improved thermal management.Features Smooth black powder coated steel. TAA Compliant
Chief EFT-3 — 3U Economy Steel Blank Panel - Flat
3U steel panels fill gaps in your rack for a seamless, professional appearance and improved thermal management.Features Smooth black powder coated steel. TAA Compliant
Chief EFT-4 — 4U Economy Steel Blank Panel - Flat
4U steel panels fill gaps in your rack for a seamless, professional appearance and improved thermal management.Features Smooth black powder coated steel. TAA Compliant
Chief EKO-3 — 3U Knockout Panels
3U panel provides knockouts for connecting multiple conduits. Discontinued
Chief EL-1-120A — Modular Panels for Elco Connectors (Discontinued)
Modular system panels designed to fit 1 Elco 120 connector. DISCONTINUED JULY, 2014Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief EL-1-38A — Modular Panels for Elco Connectors (Discontinued)
Modular system panels designed to fit 1 Elco 38 connector. DISCONTINUED JULY, 2014Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief EL-1-56A — Modular Panels for Elco Connectors (Discontinued)
Modular system panels designed to fit 1 Elco 56 connector. DISCONTINUED JULY, 2014Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief EL-1-90A — Modular Panels for Elco Connectors (Discontinued)
Modular system panels designed to fit 1 Elco 90 connector. DISCONTINUED JULY, 2014Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief EL-2-38A — Modular Panels for Elco Connectors (Discontinued)
Modular system panels designed to fit 2 Elco 38 connectors. DISCONTINUED JULY, 2014Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief EL-2-56A — Modular Panels for Elco Connectors (Discontinued)
Modular system panels designed to fit 2 Elco 56 connectors. DISCONTINUED JULY, 2014Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief EL-2-90A — Modular Panels for Elco Connectors (Discontinued)
Modular system panels designed to fit 2 Elco 90 connectorsFeatures Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief ERD-12 — Acrylic Door for 12U Economy Racks
Acrylic door for 12U Economy Rack (ER). Includes lock.Features TAA Compliant
Chief ERD-12P — Perforated Steel Door for 12U Economy Racks
Perforated steel door for 12U Economy Rack (ER). Includes lock.Features TAA Compliant
Chief ERD-16 — Acrylic Door for 16U Economy Racks
Acrylic door for 16U Economy Rack (ER). Includes lock.Features TAA Compliant
Chief ERD-16P — Perforated Steel Door for 16U Economy Racks
Perforated steel door for 16U Economy Rack (ER). Includes lock.Features TAA Compliant
Chief ERD-20 — Acrylic Door for 20U Economy Racks
Acrylic door for 20U Economy Rack (ER). Includes lock.Features TAA Compliant
Chief ERD-20P — Perforated Steel Door for 20U Economy Racks
Perforated steel door for 20U Economy Rack (ER). Includes lock.Features TAA Compliant
Chief ERD-8 — Acrylic Door for 8U Economy Racks
Acrylic door for 8U Economy Rack (ER). Includes lock.Features TAA Compliant
Chief ERD-8P — Perforated Steel Door for 8U Economy Racks
Perforated steel door for 8U Economy Rack (ER). Includes lock.Features TAA Compliant
Chief ERKD-12 — Acrylic Front Door for 12U Elite Racks
Front acrylic door 12U Elite racks to finish off the appearance and add security to your rack.Features TAA Compliant
Chief ERKD-12BR — Ebony Fleck Wooden Rear Door for 12U Elite Racks
Matching Ebony Fleck laminate rear door for 12U Elite racks to finish off the appearance and add security to your rack.
Chief ERKD-12MR — Maple Wooden Rear Door for 12U Elite Racks
Matching Maple laminate rear door for 12U Elite racks to finish off the appearance and add security to your rack.
Chief ERKD-16 — Acrylic Front Door for 16U Elite Racks
Front acrylic door 16U Elite racks to finish off the appearance and add security to your rack. Width: 18 7/8" Height: 25" Depth: 3/4'Features TAA Compliant
Chief ERKD-16BR — Ebony Fleck Wooden Rear Door for 16U Elite Racks
Matching Ebony Fleck laminate rear door for 16U Elite racks to finish off the appearance and add security to your rack.
Chief ERKD-16MR — Maple Wooden Rear Door for 16U Elite Racks
Matching Maple laminate rear door for 16U Elite racks to finish off the appearance and add security to your rack.
Chief ERKD-20 — Plexiglas Front Door for 20U Elite Racks
Front Plexiglas door 20U Elite racks to finish off the appearance and add security to your rack.Features TAA Compliant
Chief ERKD-20BR — Ebony Fleck Wooden Rear Door for 20U Elite Racks
Matching Ebony Fleck laminate rear door for 20U Elite racks to finish off the appearance and add security to your rack.
Chief ERKD-20MR — Maple Wooden Rear Door for 20U Elite Racks
Matching Maple laminate rear door for 20U Elite racks to finish off the appearance and add security to your rack.
Chief ERKD-8 — Plexiglas Front Door for 8U Elite Racks
Front Plexiglas door 8U Elite racks to finish off the appearance and add security to your rack.
Chief ERKD-8BR — Ebony Fleck Wooden Rear Door for 8U Elite Racks
Matching Ebony Fleck laminate rear door for 8U Elite racks to finish off the appearance and add security to your rack.
Chief ERKD-8MR — Maple Wooden Rear Door for 8U Elite Racks
Matching Maple laminate rear door for 8U Elite racks to finish off the appearance and add security to your rack.
Chief ERSS-36 — 36" Economy Speaker Stands
A pair of 36" tall (36.6" with included feet) speaker stands boasts a simple design to hold speakers. Constructed of furniture grade hardboard and finished in black oak laminate.Features TAA Compliant
Chief ERSS-42 — 42" Economy Speaker Stands
A pair of 42" tall (42.6" with included feet) speaker stands boasts a simple design to hold speakers. Constructed of furniture grade hardboard and finished in black oak laminate.Features TAA Compliant
Chief ERT-CH-SL — Sliding Top Shelf for ERT Desks
Cherry laminate sliding shelf allows the desk surface of your ERT desk to pull-out for ease of use.
Chief ERT-CHSLR — Slide-Out Rack for ERT Desks
The ERTRACK Series is designed for use with the ERT Elite Roll Top Desks. This slanted, sliding 10U rack can be used as an alternate to rack rails. The ERT-CHSLR in cherry finish coordinates with the ERT-CH and ERT-CHSD Elite Roll Top Desks. Discontinued.  Replaced with ERT-SLRKCH.
Chief ERT-ST/SL — Sliding Top Shelf for ERT Desks
Black powder coated steel sliding shelf allows the desk surface of your ERT-ST desk to pull-out for ease of use. DISCONTINUED. REPLACED BY ERT-SHLFST.
Chief ERT-WT/SL — Sliding Top Shelf for ERT Desks
Walnut laminate sliding shelf allows the desk surface of your ERT desk to pull-out for ease of use.
Chief ERT-WTSLR — Slide-Out Rack for ERT Desks
The ERTRACK Series is designed for use with the ERT Elite Roll Top Desks. This slanted, sliding 10U rack can be used as an alternate to rack rails. The ERT-WTSLR in walnut finish is designed for use with the ERT-WT or ERT-WTSD Elite Top Roll Desks.
Chief ESD-2 — 2U Economy Rack Drawer
2U rack-mount economy drawer. Include knockouts for adding a lock to the front of the drawer and cable passages for equipment in the rear of the drawer.Features Finished in durable smooth black powder coat. Made of 16-guage steel.
Chief ESD-2-L — 2U выдвижной ящик с замкомСпецпредложение
Chief ESD-3 — 3U Economy Rack Drawer
3U rack-mount economy drawer. Include knockouts for adding a lock to the front of the drawer and cable passages for equipment in the rear of the drawer.Features Finished in durable smooth black powder coat. Made of 16-guage steel.
Chief ESD-3-L — 3U выдвижной ящик с замкомСпецпредложение
Выдвижной ящик CHIEF ESD-3-L 3U для реков, с замком Economy Rack Drawer with Lock
Chief ESD-4 — 4U Economy Rack Drawer
4U rack-mount economy drawer. Include knockouts for adding a lock to the front of the drawer and cable passages for equipment in the rear of the drawer.Features Finished in durable smooth black powder coat. Made of 16-guage steel.
Chief ESD-4-L — 4U Economy Rack Drawer with Lock
4U rack-mount economy drawer with lock. Include knockouts for cable passages for equipment in the rear of the drawer.Features Finished in durable smooth black powder coat. Made of 16-guage steel.Includes pre-installed lock.
Chief ESS-42BSL — Elite Speaker Stands in Ebony Fleck Laminate
A pair of 42" stands constructed of fused melamine with dual cable management ducts along the front and back with contrasting silver trim covers.Features 13.5" Square base and speaker platform.
Chief ESS-42MSL — Elite Speaker Stands in Maple Laminate
A pair of 42" stands constructed of fused melamine with dual cable management ducts along the front and back with contrasting silver trim covers.Features 13.5" Square base and speaker platform. 
Chief EVP-1 — 1U Economy Steel Vent Panel
1U flanged steel panel with cutout slots that facilitate passive cooling.Features 16 gauge steel panel. Finished in smooth black powder coat. 1/2" return flange for added strength.
Chief EVP-2 — 2U Economy Steel Vent Panel
2U flanged steel panel with cutout slots that facilitate passive cooling.Features 16 gauge steel panel. Finished in smooth black powder coat. 1/2" return flange for added strength.
Chief EVP-3 — 3U Economy Steel Vent Panel
3U flanged steel panel with cutout slots that facilitate passive cooling.Features 16 gauge steel panel. Finished in smooth black powder coat. 1/2" return flange for added strength.
Chief EXS-2 — Extendable Rack Shelf
Heavy-duty large-capacity rack shelf that connects to rear rack rails. Works with rack rails between 21" and 28" deep. Features a ventilated bottom panel to keep equipment cool. Compatible with any Raxxess rack with rear rack rail.
Chief EXS-2-16 — Extendable Rack Shelf
Heavy-duty large-capacity rack shelf that connects to rear rack rails. Works with rack rails between 16" and 23" deep. Features a ventilated bottom panel to keep equipment cool. Compatible with any Raxxess rack with rear rack rail.
Chief FAN — 4.5" 120V Fan
4.5" fan moves 95CFM of air to keep your equipment cool. 120V / 60Hz only. Use with FPL-1/2/3 and 4FANGUARD.
Chief FAN/QUIET — 4.5" quiet 120V Fan
4.5" quiet fan moves 50CFM of air at only 28dBA to keep your equipment cool. 120V / 60Hz only.  Includes 3 foot removable AC power cord. Use with FPL-1/2/3 and 4FANGUARD.
Chief FDI-2 — 2U Foam Drawer Insert
Protective foam insert fit all 2U ESD and SDR drawers. Pluck-out design allows you to create custom padded drawer inserts to fit the exact equipment you need to protect. THIS PRODUCT HAS BEEN DISCONTINUED. 
Chief FDI-3 — 3U Foam Drawer Insert
Protective foam insert fit all 3U ESD and SDR drawers. Pluck-out design allows you to create custom padded drawer inserts to fit the exact equipment you need to protect. THIS PRODUCT HAS BEEN DISCONTINUED.
Chief FDI-4 — 4U Foam Drawer Insert
Protective foam insert fit all 4U ESD and SDR drawers. Pluck-out design allows you to create custom padded drawer inserts to fit the exact equipment you need to protect. THIS PRODUCT HAS BEEN DISCONTINUED.
Chief FL — Floor levelers for E1, F1, G1 and S1 Racks
Set of 4 adjustable floor levelers with threaded posts that fit all E1, F1, G1 and S1 racks.Features Also compatible with Obsolete GAR and KAR racks.
Chief FSK-B — Finishing strip covers screws and rack rail
Finishing strip covers screws and rack rail to complete a perfect installation. Strip is black, brushed anodized aluminum and can be field cut to the exact length needed. Uncut length is approximately 78". Two are required to cover any rack with rails taller than 20RU.
Chief FVP-1 — 1U Steel Fine Vent Panel
1U perforated vent panel fills empty gaps in your rack and promotes good airflow to cool your equipment. Fine perforations are designed to limit visibility into the rack.Features 1/16" (1.5mm) perforation holes. Finished in smooth black powder coat.
Chief FVP-2 — 2U Steel Fine Vent Panel
2U perforated vent panel fills empty gaps in your rack and promotes good airflow to cool your equipment. Fine perforations are designed to limit visibility into the rack.Features 1/16" (1.5mm) perforation holes. Finished in smooth black powder coat.
Chief FVP-3 — 3U Steel Fine Vent Panel
3U perforated vent panel fills empty gaps in your rack and promotes good airflow to cool your equipment. Fine perforations are designed to limit visibility into the rack.Features 1/16" (1.5mm) perforation holes. Finished in smooth black powder coat.
Chief FVP-4 — 4U Steel Fine Vent Panel
4U perforated vent panel fills empty gaps in your rack and promotes good airflow to cool your equipment. Fine perforations are designed to limit visibility into the rack.Features 1/16" (1.5mm) perforation holes. Finished in smooth black powder coat.
Chief GARSP-35-26 — Side Panels for 35U, 26" Deep GAR Racks
Solid steel side panel for the GAR-35-26, sold individually.Features Includes lock.
Chief GARSP-35-32 — Side Panels for 35U, 32" Deep GAR Racks
Solid steel side panel for the GAR-35-32, sold individually.Features Includes lock.
Chief GARSP-40-26 — Side Panels for 40U, 26" Deep GAR Racks
Solid steel side panel for the GAR-40-26, sold individually.Features Includes lock.
Chief GARSP-40-32 — Side Panels for 40U, 32" Deep GAR Racks
Solid steel side panel for the GAR-40-32, sold individually.Features Includes lock.
Chief GARSP-44-26 — Side Panels for 44U, 26" Deep GAR Racks
Solid steel side panel for the GAR-44-26, sold individually.Features Includes lock.
Chief GARSP-44-32 — Side Panels for 44U, 32" Deep GAR Racks
Solid steel side panel for the GAR-44-32, sold individually.Features Includes lock.
Chief GRFWS-RB — Monitor Shelf for GRFWS
Monitor shelf for graphic workstation   All Graphite Series AV racks will be discontinued as of March 1st, 2014.Features Elevate your monitor above the desk surface for easier viewing and more work space.
Chief GRFWSD — Door for GRFWSRK
Plexiglas door for Graphite Series Workstation Rack.   All Graphite Series AV racks will be discontinued as of March 1st, 2014.Features Includes lock. Smoked Plexiglas allows visibility into the rack while reducing glare from indicator lights.
Chief HH-1 — Vertical Headphone Hanger
An easy and durable solution for headphone storage. Simply replace one rack screw with this headphone hanger and you have a convenient place to hang your headphones. Comes out vertically from the front of the rack.
Chief HH-2 — Angled Headphone Hanger
An easy and durable solution for headphone storage. Simply replace one rack screw with this headphone hanger and you have a convenient place to hang your headphones. Comes out at an angle to the front of the rack.
Chief HVP-2 — 2U Hinged Vent Panel
2U hinged vent panel can be configured to open from the left or right hand side. Provides ventilation and access to the inside of the rack.Features Finished in durable smooth black powder coat.
Chief HVP-3 — 3U Hinged Vent Panel
3U hinged vent panel can be configured to open from the left or right hand side. Provides ventilation and access to the inside of the rack.Features Finished in durable smooth black powder coat.
Chief HVP-4 — 4U Hinged Vent Panel
4U hinged vent panel can be configured to open from the left or right hand side. Provides ventilation and access to the inside of the rack.Features Finished in durable smooth black powder coat.
Chief HVP-6 — 6U Hinged Vent Panel
6U hinged vent panel can be configured to open from the left or right hand side. Provides ventilation and access to the inside of the rack.Features Finished in durable smooth black powder coat.
Chief KBS-1B — 20" Wide Keyboard Shelf for Config-U-Raxx Systems
20" wide keyboard shelf for Config-U-Raxx center desks in Ebony Fleck laminate. This wide keyboard shelf is fully articulating to get the keyboard into exactly the right position. Compatible with all Config-U-Raxx Center Desks. Config - U - Raxx products and accessories will be discontinued January, 1st 2014
Chief KBS-1M — 20" Wide Keyboard Shelf for Config-U-Raxx Systems
20" wide keyboard shelf for Config-U-Raxx center desks in Maple laminate. This wide keyboard shelf is fully articulating to get the keyboard into exactly the right position. Compatible with all Config-U-Raxx Center Desks. Config - U - Raxx products and accessories will be discontinued January, 1st 2014  
Chief KBS-2B — 28" Wide Keyboard Shelf for Config-U-Raxx Systems
28" wide keyboard shelf for Config-U-Raxx center desks in Ebony Fleck laminate. This wide keyboard shelf is fully articulating to get the keyboard into exactly the right position. Compatible with all Config-U-Raxx Center Desks except for Corner Desks (CRND-B and CRND-M). Config - U - Raxx products and accessories will be discontinued January, 1st 2014
Chief KBS-2M — 28" Wide Keyboard Shelf for Config-U-Raxx Systems
28" wide keyboard shelf for Config-U-Raxx center desks in Maple laminate. This wide keyboard shelf is fully articulating to get the keyboard into exactly the right position. Compatible with all Config-U-Raxx Center Desks except for Corner Desks (CRND-B and CRND-M) Config - U - Raxx products and accessories will be discontinued January, 1st 2014
Chief LCS — 2" Wide 77" Vertical Lacing Strip, can be cut to appropriate length
2" wide vertical lacing strip easily and neatly routes cables within your rack
Chief LCS-1 — 1" Wide 77" Vertical Lacing Strip, can be cut to appropriate length
1" wide vertical lacing strip easily and neatly routes cables within your rack.
Chief LCS-W1-12 — LCS-W1
Vertical Lacing Strip for W1-12U racks. Can install up to two lacing strips per rack.  Includes all necessary mounting hardware.
Chief LCS-W1-20 — LCS-W1
Vertical Lacing Strip for W1-20U racks. Can install up to two lacing strips per rack.  Includes all necessary mounting hardware.
Chief LCS-W1-28 — LCS-W1
Vertical Lacing Strip for W1-28U racks. Can install up to two lacing strips per rack.  Includes all necessary mounting hardware.
Chief LCS-W1-36 — LCS-W1
Vertical Lacing Strip for W1-36U racks. Can install up to two lacing strips per rack.  Includes all necessary mounting hardware.
Chief LOCK — Lock for ESD or SDR drawers
Add a lock to any ESD or SDR drawer not ordered with a factory installed lockFeatures Specifications Assembly Required: Y Shipping Weight: 0.55
Chief LPPS12-15-1 — 12 duplex 15A, 120V Power Strip With Power Cord
Low profile vertical power strip, 12 duplex receptacles (24 outlets total), 120V, 15A, 1 circuit, terminated in a 14 awg power cord.
Chief LPPS6-15-1 — 6 duplex 15A, 120V Power Strip With Power Cord
Low profile vertical power strip, 6 duplex receptacles (12 outlets total), 120V, 15A, 1 circuit, terminated in a 14 awg power cord.
Chief LPPS9-15-1 — 9 duplex 15A, 120V Power Strip With Power Cord
Low profile vertical power strip, 9 duplex receptacles (18 outlets total), 120V, 15A, 1 circuit, terminated in a 14 awg power cord.
Chief LSC-2 — 2U Steel Locking Security Cover
2U steel locking security covers installs in front of rack mounted equipment to keep it secure, but still allows access when needed.
Chief LSC-4 — 4U Steel Locking Security Cover
4U steel locking security covers installs in front of rack mounted equipment to keep it secure, but still allows access when needed.
Chief LSC-8 — 8U Steel Locking Security Cover
8U steel locking security covers installs in front of rack mounted equipment to keep it secure, but still allows access when needed.
Chief LSCP-2 — 2U Plexiglas Locking Security Cover
2U Plexiglas locking security covers installs in front of rack mounted equipment to keep it secure, but still allows visibility and access when needed.
Chief LSCP-4 — 4U Plexiglas Locking Security Cover
4U Plexiglas locking security covers installs in front of rack mounted equipment to keep it secure, but still allows visibility and access when needed.
Chief LSCP-8 — 8U Plexiglas Locking Security Cover
8U Plexiglas locking security covers installs in front of rack mounted equipment to keep it secure, but still allows visibility and access when needed.
Chief MCF-2 — 4U Modular Connector Frame
4U modular connector frames combines up to 10 modular panels to make a rack mounted patch panel. DiscontinuedFeatures Modular panel system allows you to easily make custom rack mounted patch panels.
Chief MCF-3 — 6U Modular Connector Frame
6U modular connector frames combines up to 15 modular panels to make a rack mounted patch panel. DiscontinuedFeatures Modular panel system allows you to easily make custom rack mounted patch panels.
Chief MCP-ADAPTOR — Modular Panel Adaptor
Connects any one modular system panel to a standard 1900 box. DiscontinuedFeatures Modular panel system allows you to easily make custom wall mounted patch panels.
Chief MIDI-1A — Modular Panels for MIDI Connectors (Discontinued)
Modular system panels designed to fit 1 MIDI connector. DISCONTINUED JULY, 2014Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief MWB-2 — 2 Panel Modular Wall Boxes
Modular wall box holds up to 2 modular panels to make a wall mounted patch panel. DISCONTINUED JULY, 2014.Features Modular panel system allows you to easily make custom wall mounted patch panels.
Chief MWB-4 — 4 Panel Modular Wall Boxes
Modular wall box holds up to 4 modular panels to make a wall mounted patch panel. DISCONTINUED JULY, 2014.Features Modular panel system allows you to easily make custom wall mounted patch panels.
Chief MWB-6 — 6 Panel Modular Wall Boxes
Modular wall box holds up to 6 modular panels to make a wall mounted patch panel. DISCONTINUED JULY, 2014.Features Modular panel system allows you to easily make custom wall mounted patch panels.
Chief NAB1BW — Branding Plate
Keep your brand out front with branding plate for the E1, F1, G1, S1, W1, and W2 series racks. Mounts to the frame or on door (W1, W2); will not be covered when door is closed or lose precious RU space in rack. Contact customer service for information about having Chief screen print your brand onto these plates for you.
Chief NAC20M — дополнительные колеса для рэков
NAC20M - Колеса дополнительные Chief NAC20M, для рэков серии S2, диаметр 5см. (набор 4 шт.)
Chief NADBW — Document Holder
Document holder attaches to any flat surface and keeps relevant documents in the rack where they are needed.Features Attaches to any flat surface.
Chief NAF15BA — 1U Fan Panel
Intake fan panel puts 50 CFM of cooling capacity in a 1U space. The panel draws air into the rack from the front.  It is designed to install in front rack rail above heat generating components to aid in convective flow of hot air up and away from components.Features Power supply is auto-ranging from 110 to 240VAC and 50 or 60 Hz.
Chief NAF31QBA — 3U Quiet Single Fan Panels
3U exhaust fan panel with 1 quiet fan moves 60 CFM of air. Front panel is made of attractive brushed black anodized aluminum to fit into any setting.Features Power supply is auto-ranging from 110 to 240VAC and 50 or 60 Hz.
Chief NAF32HBA — 3U High Flow Dual Fan Panels
3U exhaust fan panel with 2 high flow fan moves 200 CFM of air. Front panel is made of attractive brushed black anodized aluminum to fit into any setting.Features Power supply is auto-ranging from 110 to 240VAC and 50 or 60 Hz.
Chief NAF32QBA — 3U Quiet Dual Fan Panels
3U exhaust fan panel with 2 quiet fan moves 120 CFM of air. Front panel is made of attractive brushed black anodized aluminum to fit into any setting.Features Power supply is auto-ranging from 110 to 240VAC and 50 or 60 Hz.
Chief NAF33HBA — 3U High Flow Triple Fan Panels
3U exhaust fan panel with 3 high flow fan moves 300 CFM of air. Front panel is made of attractive brushed black anodized aluminum to fit into any setting.Features Power supply is auto-ranging from 110 to 240VAC and 50 or 60 Hz.
Chief NAF33QBA — 3U Quiet Triple Fan Panels
3U exhaust fan panel with 3 quiet fan moves 180 CFM of air. Front panel is made of attractive brushed black anodized aluminum to fit into any setting.Features Power supply is auto-ranging from 110 to 240VAC and 50 or 60 Hz.
Chief NAFB2BW — Bottom Mounted Filtered Fan Panel
Bottom mounted filtered fan panel fits into the bottom of all G1, E1, S1, and F1 racks.  Designed as an intake unit, this fan panel quietly draws cool, filtered air in from the bottom of the rack to aid in convection flow. This panel features a cleanable filter that keeps dust out of the cabinet and provides 200 CFM of air movement.Features Power supply is auto-ranging from 110 to 240VAC and 50 or 60 Hz.
Chief NAFT85 — 12VDC On/Off Thermostat
On/Off thermostat turns fans on at 85° F (29.4° C) and off at 75° F (23.9° C). Compatible with all Chief fan panels with part numbers beginning NAF. One input and two outputs allow for the control of up to two fan panels.
Chief NAG1BW — 1U Brush Grommet
1U brush grommet keeps the face of the rack closed, but allow easy pass-through of cables.Features Includes punch pattern on rear of brush grommet for securing cables.
Chief NAG2BW — 2U Brush Grommet
2U brush grommet keeps the face of the rack closed, but allow easy pass-through of cables.Features Includes punch pattern on rear of brush grommet for securing cables.
Chief NAID1B — 1U Rack Mount iPod Dock
An in-rack iPod docking station 1U height Comes with USB auto switching power supply, cables, and remote control (IR hex code available in download section) Compatible with 30-pin analog connector Compatible with iPhone 5/iPod touch 5th Gen in conjunction with Apple lighting to 30 pin Adapter Not compatible with iPads Features Specifications Color:
Chief NAID4B — 4U Rack Mount iPod Dock
An in-rack iPod docking station 4U height Comes with USB auto switching power supply, cables, and remote control (IR hex code available in download section) Compatible with 30-pin analog connector Compatible with iPhone 5/iPod touch 5th Gen in conjunction with Apple lighting to 30 pin Adapter Not compatible with iPads Features Specifications Color:
Chief NALRBW — рэковый светильникСпецпредложение
NALRBW рэковый светильник 1U LED темп. D6500, поворотный, 12V
Chief NAM1A — Articulating Rack Monitor Mount
Articulating rack monitor mount allows you to work on rack mounted computers right at the rack. Monitor pulls out from the rack and can pan and tilt for optimum viewing. Accommodates monitors up to 17" wide. DISCONTINUED. See NAM2A for replacement.
Chief NAM1F — Fixed Rack Monitor Mount
Fixed rack monitor mount allows you to work on rack mounted computers right at the rack. Accommodates monitors up to 17" wide.
Chief NAM1T — Tilting Rack Monitor Mount
Tilting rack monitor mount allows you to work on rack mounted computers right at the rack. Monitor tilts for optimum viewing. Accommodates monitors up to 17" wide.
Chief NAM2A — Articulating Rack Monitor Mount
Articulating rack monitor mount allows you to work on rack mounted computers right at the rack. Monitor pulls out from the rack and can pan and tilt for optimum viewing. Accommodates monitors up to 17" wide.
Chief NAPDH11 — NAPDH Surge Arrester-1U (without light)
15A, 120V horizontally mounted 1U surge arrester includes 10 outlets on the rear and 1 front outlet. Features an attached 12 foot power cord.(Note: The NAPDH Series replaces the PD-800, PD-800L and the PD-800VM.)
Chief NAPDH11L — NAPDH Surge Arrester-1U (with light)
15A, 120V horizontally mounted 1U surge arrester includes 10 outlets on the rear and 1 front outlet.  Features an attached 12 foot power cord.(Note: The NAPDH Series replaces the PD-800, PD-800L and the PD-800VM.)
Chief NAPDV06152 — J-Box & Pigtails, 2x15A, 6 Receptacles
Low profile vertical power strip, 6 single receptacles (two circuits of three, each individually labeled), 120V, 15A per circuit, with J-Box and two sets of labeled pigtails.Discontinued April 1, 2015. Replaced by NAPDV06152PC Low profile vertical power strip, 6 single receptacles (two circuits of three, each individually labeled), 120V, 15A per circuit, with J-Box and two sets of labeled pigtails.
Chief NAPDV0615PC — Removable IEC cord, 15A, 6 Receptacles
Low profile vertical power strip, 6 single receptacles, 120V, 15A, 1 circuit, with removable IEC connector.Low profile vertical power strip, 6 single receptacles, 120V, 15A, 1 circuit, with removable IEC connector.
Chief NAPDV06202 — J-Box & Pigtails, 2x20A, 6 Receptacles
Low profile vertical power strip, 6 single receptacles (two circuits of three, each individually labeled), 120V, 20A per circuit, with J-Box and two sets of labeled pigtails.Discontinued April 1, 2015. Replaced by NAPDV06202PCLow profile vertical power strip, 6 single receptacles 
Chief NAPDV0620PC — Removable IEC cord, 20A, 6 Receptacles
Low profile vertical power strip, 6 single receptacles, 120V, 20A, 1 circuit, with removable IEC connector.Low profile vertical power strip, 6 single receptacles, 120V, 20A, 1 circuit, with removable IEC connector.
Chief NAPDV12152 — J-Box & Pigtails, 2x15A, 12 Receptacles
Low profile vertical power strip, 12 single receptacles (two circuits of six, each individually labeled), 120V, 15A per circuit, with J-Box and two sets of labeled pigtails.Discontinued April 1, 2015. Replaced by NAPDV12152PCLow profile vertical power strip, 12 single receptacles 12 single receptacles 
Chief NAPDV1215PC — Removable IEC cord, 15A, 12 Receptacles
Low profile vertical power strip, 12 single receptacles, 120V, 15A, 1 circuit, with removable IEC connector.Low profile vertical power strip, 12 single receptacles, 120V, 15A, 1 circuit, with removable IEC connector.
Chief NAPDV12202 — J-Box & Pigtails, 2x20A, 12 Receptacles
Low profile vertical power strip, 12 single receptacles (two circuits of six, each individually labeled), 120V, 20A per circuit, with J-Box and two sets of labeled pigtails.Discontinued April 1, 2015. Replaced by NAPDV12202PCLow profile vertical power strip, 12 single receptacles 
Chief NAPDV1220PC — Removable IEC cord, 20A, 12 Receptacles
Low profile vertical power strip, 12 single receptacles, 120V, 20A, 1 circuit, with removable IEC connector.Low profile vertical power strip, 12 single receptacles, 120V, 20A, 1 circuit, with removable IEC connector.
Chief NAPDV18152 — J-Box & Pigtails, 2x15A, 18 Receptacles
Low profile vertical power strip, 18 single receptacles (two circuits of nine, each individually labeled), 120V, 15A per circuit, with J-Box and two sets of labeled pigtails.Discontinued April 1, 2015. Replaced by NAPDV18152PCLow profile vertical power strip, 18 single receptacles Low profile vertical power strip
Chief NAPDV1815PC — Removable IEC cord, 15A, 18 Receptacles
Low profile vertical power strip, 18 single receptacles, 120V, 15A, 1 circuit, with removable IEC connector.Low profile vertical power strip, 18 single receptacles, 120V, 15A, 1 circuit, with removable IEC connector.
Chief NAPDV18202 — J-Box & Pigtails, 2x20A, 18 Receptacles
Low profile vertical power strip, 18 single receptacles (two circuits of nine, each individually labeled), 120V, 20A per circuit, with J-Box and two sets of labeled pigtails.Discontinued April 1, 2015. Replaced by NAPDV18202PCLow profile vertical power strip, 18 single receptacles 
Chief NAPDV1820PC — Removable IEC cord, 20A, 18 Receptacles
Low profile vertical power strip, 18 single receptacles, 120V, 20A, 1 circuit, with removable IEC connector.Low profile vertical power strip, 18 single receptacles, 120V, 20A, 1 circuit, with removable IEC connector.
Chief NAPDV24152 — J-Box & Pigtails, 2x15A, 24 Receptacles
Low profile vertical power strip, 24 single receptacles (two circuits of twelve, each individually labeled), 120V, 15A per circuit, with J-Box and two sets of labeled pigtails.Discontinued April 1, 2015. Replaced by NAPDV24152PCLow profile vertical power strip, 24 single receptacles 
Chief NAPDV2415PC — Removable IEC cord, 15A, 24 Receptacles
Low profile vertical power strip, 24 single receptacles, 120V, 15A, 1 circuit, with removable IEC connector.Low profile vertical power strip, 24 single receptacles, 120V, 15A, 1 circuit, with removable IEC connector.
Chief NAPDV24202 — J-Box & Pigtails, 2x20A, 24 Receptacles
Low profile vertical power strip, 24 single receptacles (two circuits of twelve, each individually labeled), 120V, 20A per circuit, with J-Box and two sets of labeled pigtails.Discontinued April 1, 2015. Replaced by NAPDV24202PCLow profile vertical power strip, 24 single receptacles 
Chief NAPDV2420PC — Removable IEC cord, 20A, 24 Receptacles
Low profile vertical power strip, 24 single receptacles, 120V, 20A, 1 circuit, with removable IEC connector.Low profile vertical power strip, 24 single receptacles, 120V, 20A, 1 circuit, with removable IEC connector.
Chief NAS1S23 — S1 Shelf for 23" Deep S1 Racks
Shelf for 23" deep S1 racks add stability to the rack and create a heavy-duty platform for equipment.
Chief NAS1S28 — S1 Shelf for 28" Deep S1 Racks
Shelf for 28" deep S1 racks add stability to the rack and create a heavy-duty platform for equipment.
Chief NATPBS — Touch-up Paint for Smooth Black Powder Coat
Touch-up paint for smooth black powder coat ensures you can deliver a flawless product to your customer.
Chief NATPBW — Touch-up Paint for Black Wrinkle Powder Coat
Touch-up paint for wrinkle black powder coat ensures you can deliver a flawless product to your customer.
Chief NAV8B — Vent Blocking Kit
Vent block kit improves bottom up air circulation in E1, W1, and W2 racks - add this kit whenever you are installing fans in the top of the rack to keep air flow going up and out.
Chief NAWS1 — Wall Shelf
Wall shelf provide a convenient way to mount non-rack mounted equipment to any wall. Bottom punch pattern delivers good ventilation and cable management.
Chief NAXQ20 — SurgeX 20A Sequencer
20A, 120V, 2U SurgeX sequencer has two always on outlets and three banks of four programmable outlets. Also includes SurgeX A-1-1 certified surge elimination technology.
Chief NAXS15 — SurgeX 15A Surge Eliminator
15A, 120V, 1U SurgeX surge eliminator feature A-1-1 certified surge elimination and EMI/RFI elimination.
Chief NAXS15RT — SurgeX 15A Surge Eliminator With Remote Control
15A, 120V, 1U SurgeX surge eliminator feature A-1-1 certified surge elimination, EMI/RFI elimination, over/under-voltage shutdown, and remote control.
Chief NAXS15VM — SurgeX 15A Vertical Mount Surge Eliminator With Remote Control
15A, 120V vertical mount SurgeX surge eliminator feature A-1-1 certified surge elimination, EMI/RFI elimination, and remote control. Mounts to the rear rack rail of any rack. Uses 0U of rack space and hinges open for service access to wiring and components behind the units. Note, this product has been discontinued.
Chief NAXS20 — SurgeX 20A Surge Eliminator
Program, sequence, protect, and condition your system's power. The NAXS20 Sequencer provides sequencing parameters, conditioning, shutdown thresholds, and surge protection needed to safeguard audio, videa, broadcast, and computer equipment. 20A, 120V, 2U SurgeX surge eliminator feature A-1-1 certified surge elimination and EMI/RFI elimination. Discontinued. See NAXQ20 for replacement.
Chief NAXS20RT — SurgeX 20A Surge Eliminator With Remote Control
20A, 120V, 1U SurgeX surge eliminator feature A-1-1 certified surge elimination, EMI/RFI elimination, over/under-voltage shutdown, and remote control.
Chief NAXU15 — SurgeX 15A UPS
Safeguard equipment and save space with this unique UPS plus protection solution. All-in-one 2 RU protection and backup solution eliminates surges, regulates voltages, and provides uninterrupted power to rack systems where space is critical. 15A, 120V, 2U SurgeX UPS features two outlets connected to the UPS and four not connected.  Includes SurgeX A-1-1 certified surge elimination technology. 1000VA/600W capacity Back-up Run Time: 4 minutes 600W full load, 10.4 minutes 300W half load  
Chief NE1D20F — Perforated Steel Door for 20U E1 Rack
20U E1 Series door in perforated steel.
Chief NE1D20P — Plexiglas Door for 20U E1 Rack
20U E1 Series door in Plexiglas
Chief NE1D20S — Steel Door for 20U E1 Rack
20U E1 Series door in solid steel
Chief NE1D28F — Perforated Steel Door for 28U E1 Rack
28U E1 Series door in perforated steel
Chief NE1D28P — Plexiglas Door for 28U E1 Rack
28U E1 Series door in PlexiglasFeatures Includes lock. Door can be reversed for right or left handed opening. Smoked Plexiglas allows visibility into rack but cuts down glare of indicator lights.
Chief NE1D28S — Steel Door for 28U E1 Rack
28U E1 Series door in solid steel
Chief NE1D36F — Perforated Steel Door for 36U E1 Rack
36U E1 Series door in perforated steel
Chief NE1D36P — Plexiglas Door for 36U E1 Rack
36U E1 Series door in Plexiglas
Chief NE1D36S — Steel Door for 36U E1 Rack
36U E1 Series door in solid steel.
Chief NE1D44F — Perforated Steel Door for 44U E1 Rack
44U E1 Series door in perforated steel.
Chief NE1D44P — Plexiglas Door for 44U E1 Rack
44U E1 Series door in Plexiglas.
Chief NE1D44S — Steel Door for 44U E1 Rack
44U E1 Series door in solid steel.
Chief NG1D28F — G1 Gangable Rack Door, 28U, Perforated Steel
28U G1 Series door in perforated steel.
Chief NG1D28P — G1 Gangable Rack Door, 28U, Plexiglas
28U G1 Series door in Plexiglas.
Chief NG1D28S — G1 Gangable Rack Door, 28U, Solid Steel
28U G1 Series door in solid steel.
Chief NG1D36F — G1 Gangable Rack Door, 36U, Perforated Steel
36U G1 Series door in perforated steel.
Chief NG1D36P — G1 Gangable Rack Door, 36U, Plexiglas
36U G1 Series door in Plexiglas.
Chief NG1D36S — G1 Gangable Rack Door, 36U, Solid Steel
36U G1 Series door in solid steel.
Chief NG1D44F — G1 Gangable Rack Door, 44U, Perforated Steel
44U G1 Series door in perforated steel.
Chief NG1D44P — G1 Gangable Rack Door, 44U, Plexiglas
44U G1 Series door in Plexiglas.
Chief NG1D44S — G1 Gangable Rack Door, 44U, Solid Steel
44U G1 Series door in solid steel.
Chief NG1S2828 — G1 Side Panels, 28U, 28" Deep
Solid steel side panels for 28U, 28" deep G1 Series racks - sold in pairs.
Chief NG1S2833 — G1 Side Panels, 28U, 33" Deep
Solid steel side panels for 28U, 33" deep G1 Series racks - sold in pairs.
Chief NG1S3628 — G1 Side Panels, 36U, 28" Deep
Solid steel side panels for 36U, 28" deep G1 Series racks - sold in pairs.
Chief NG1S3633 — G1 Side Panels, 36U, 33" Deep
Solid steel side panels for 36U, 33" deep G1 Series racks - sold in pairs.
Chief NG1S4428 — G1 Side Panels, 44U, 28" Deep
Solid steel side panels for 44U, 28" deep G1 Series racks - sold in pairs.
Chief NG1S4433 — G1 Side Panels, 44U, 33" Deep
Solid steel side panels for 44U, 33" deep G1 Series racks - sold in pairs.
Chief NS1D12F — Perforated Steel Door for 12U S1 Rack
12U S1 Series door in perforated steel.Features Includes lock. Door can be reversed for right or left handed opening. Perforated steel improved airflow in passively cooled rack systems.
Chief NS1D12P — Plexiglas Door for 12U S1 Rack
12U S1 Series door in Plexiglas.
Chief NS1D12S — Steel Door for 12U S1 Rack
12U S1 Series door in solid steel.
Chief NS1D20F — Perforated Steel Door for 20U S1 Rack
20U S1 Series door in perforated steel.
Chief NS1D20P — Plexiglas Door for 20U S1 Rack
20U S1 Series door in Plexiglas.
Chief NS1D20S — Steel Door for 20U S1 Rack
20U S1 Series door in solid steel.Features Includes lock. Door can be reversed for right or left handed opening.
Chief NS1D28F — Perforated Steel Door for 28U S1 Rack
28U S1 Series door in perforated steel.
Chief NS1D28P — Plexiglas Door for 28U S1 Rack
28U S1 Series door in Plexiglas.Features Includes lock. Door can be reversed for right or left handed opening. Smoked Plexiglas allows visibility into rack but cuts down glare of indicator lights.
Chief NS1D28S — Steel Door for 28U S1 Rack
28U S1 Series door in solid steel.Features Includes lock. Door can be reversed for right or left handed opening.
Chief NS1D36F — Perforated Steel Door for 36U S1 Rack
36U S1 Series door in perforated steel.
Chief NS1D36P — Plexiglas Door for 36U S1 Rack
36U S1 Series door in Plexiglas.Features Includes lock. Door can be reversed for right or left handed opening. Smoked Plexiglas allows visibility into rack but cuts down glare of indicator lights.
Chief NS1D36S — Steel Door for 36U S1 Rack
36U S1 Series door in solid steel.Features Includes lock. Door can be reversed for right or left handed opening.
Chief NS1D41F — Perforated Steel Door for 41U S1 Rack
41U S1 Series door in perforated steel.
Chief NS1D41P — Plexiglas Door for 41U S1 Rack
41U S1 Series door in Plexiglas.Features Includes lock. Door can be reversed for right or left handed opening. Smoked Plexiglas allows visibility into rack but cuts down glare of indicator lights.
Chief NS1D41S — Steel Door for 41U S1 Rack
41U S1 Series door in solid steel.Features Includes lock. Door can be reversed for right or left handed opening.
Chief NS1S1223 — Pair of Side Panels for 12U, 23" Deep S1 Series Rack
Solid steel side panels for 12U, 23" deep S1 Series racks - sold in pairs.
Chief NS1S1228 — Pair of Side Panels for 12U, 28" Deep S1 Series Rack
Solid steel side panels for 12U, 28" deep S1 Series racks - sold in pairs.Features Includes security screws to prevent tampering.
Chief NS1S2023 — Pair of Side Panels for 20U, 23" Deep S1 Series Rack
Solid steel side panels for 20U, 23" deep S1 Series racks - sold in pairs.
Chief NS1S2028 — Pair of Side Panels for 20U, 28" Deep S1 Series Rack
Solid steel side panels for 20U, 28" deep S1 Series racks - sold in pairs.
Chief NS1S2823 — Pair of Side Panels for 28U, 23" Deep S1 Series Rack
Solid steel side panels for 28U, 23" deep S1 Series racks - sold in pairs.
Chief NS1S2828 — Pair of Side Panels for 28U, 28" Deep S1 Series Rack
Solid steel side panels for 28U, 28" deep S1 Series racks - sold in pairs.
Chief NS1S3623 — Pair of Side Panels for 36U, 23" Deep S1 Series Rack
Solid steel side panels for 36U, 23" deep S1 Series racks - sold in pairs.
Chief NS1S3628 — Pair of Side Panels for 36U, 28" Deep S1 Series Rack
Solid steel side panels for 36U, 28" deep S1 Series racks - sold in pairs.
Chief NS1S4123 — Pair of Side Panels for 41U, 23" Deep S1 Series Rack
Solid steel side panels for 41U, 23" deep S1 Series racks - sold in pairs.
Chief NS1S4128 — Pair of Side Panels for 41U, 28" Deep S1 Series Rack
Solid steel side panels for 41U, 28" deep S1 Series racks - sold in pairs.
Chief NS2SK — Поворотная петля для рэков серии S2, комплект 2 штСпецпредложение
Поворотная петля Chief NS2SK для рэков серии S2, комплект 2 шт
Chief NW1D12F — Perforated Steel Door for 12U W1 Rack
12U W1 Series door in perforated steel.
Chief NW1D12P — Plexiglas Door for 12U W1 Rack
 12U W1 Series door in Plexiglas.
Chief NW1D12S — Solid Steel Door for 12U W1 Rack
12U W1 Series door in solid steel.
Chief NW1D20F — Perforated Steel Door for 20U W1 Rack
20U W1 series door in perforated steel.
Chief NW1D20P — Plexiglas Door for 20U W1 Rack
12U W1 series door in Plexiglas.
Chief NW1D20S — Solid Steel Door for 20U W1 Rack
20U W1 series door in solid steel.
Chief NW1D28F — Perforated Steel Door for 28U W1 Rack
28U W1 series door in perforated steel.
Chief NW1D28P — Plexiglass Door for 28U W1 Rack
28U W1 series door in Plexiglas.
Chief NW1D28S — Solid Steel Door for 28U W1 Rack
28U W1 series door in solid steel.
Chief NW1D36F — Perforated Steel Door for 36U W1 Rack
36U W1 series door in perforated steel.
Chief NW1D36P — Plexiglas Door for 36U W1 Rack
36U W1 series door in Plexiglas.
Chief NW1D36S — Solid Steel Door for 36U W1 Rack
36U W1 series door in solid steel.
Chief PB-1 — 1U Project Box
Build your own rack mounted component a 1U project box.
Chief PB-2 — 2U Project Box
Build your own rack mounted component a 2U project box.
Chief PD-800 — PD-800 Surge Arrester
15A, 120V horizontally mounted 1U surge arrester includes 8 outlets on the rear and 1 front outlet. 1,800 Joule Rating DISCONTINUED: Replacement product is NAPDH11
Chief PD-800L — PD-800 Surge Arrester with Pull-Out Lights
15A, 120V horizontally mounted 1U surge arrester includes 8 outlets on the rear and 1 front outlet with pull-out lights in the front. 1,800 Joule Rating DISCONTINUED: Replacement product is NAPDH11L
Chief PNTX-100 — 100 Pc. Security Rack Screws
100 pieces of 10-32 X 0.75" security rack screws prevent loosening and tampering. Delivered in a plastic clamshell container.Features Ships in retail ready packaging
Chief PNTX-25 — саморез для река с секреткой 10-32 X 0.75", 25 шт.Спецпредложение
Саморез дла река CHIEF PNTX-25 с секреткой 10-32 X 0.75", 25 шт.
Chief PNTX-50 — 50 Pc. Security Rack Screws
50 pieces of 10-32 X 0.75" security rack screws prevent loosening and tampering. Delivered in a plastic clamshell container.Features Ships in retail ready packaging
Chief PNTX-B — Driver Bit for PNTX Security Rack Screws
Bit for driving PNTX security rack screws.
Chief POMT — 6" Pop Filter
6" Pop filter on a gooseneck attaches to microphone stand to help prevent unwanted sounds during recording.Features Ships in retail ready packaging
Chief POMT-8 — 8" Pop Filter
8" Pop filter on a gooseneck attaches to microphone stand to help prevent unwanted sounds during recording.Features Ships in retail ready packaging
Chief PSC-1 — 1U Perforated Steel Security Cover
1U security cover installs in front of equipment to keep it secure. Perforation holes ventilate equipment and allow for visibility of the front of equipment.Features  Attaches with two screws to allow you to mount equipment into the rack then apply the security cover over the top. 1/16" (1.5mm) perforation holes in cover for ventilation.
Chief PSC-2 — 2U Perforated Steel Security Cover
2U security cover installs in front of equipment to keep it secure. Perforation holes ventilate equipment and allow for visibility of the front of equipment.Features Attaches with two screws to allow you to mount equipment into the rack then apply the security cover over the top. 1/16" (1.5mm) perforation holes in cover for ventilation.
Chief PSC-3 — 3U Perforated Steel Security Cover
3U security cover installs in front of equipment to keep it secure. Perforation holes ventilate equipment and allow for visibility of the front of equipment.Features Attaches with two screws to allow you to mount equipment into the rack then apply the security cover over the top. 1/16" (1.5mm) perforation holes in cover for ventilation.
Chief PTSW100 — 100 Pc. Rack Screws
100 pieces of 10-32 X 0.75" rack screws with captive washer in a black zinc finish. Delivered in a plastic clam shell container.
Chief PTSW25 — 25 Pc. Rack Screws
25 pieces of 10-32 X 0.75" rack screws with captive washer in a black zinc finish. Delivered in a plastic clam shell container.
Chief PTSW50 — 50 Pc. Rack Screws
50 pieces of 10-32 X 0.75" rack screws with captive washer in a black zinc finish. Delivered in a plastic clam shell container.
Chief PTSW500 — саморез для река 10-32 X 0.75", 500 шт.Спецпредложение
Саморез дла река CHIEF PTSW500 10-32 X 0.75", 500 шт.
Chief PVP-1 — 1U Perforated Steel Vent Panel
1U steel vent panel with perforations for air circulation. Larger perforation holes than the FVP allow for better airflow and more visibility into the rack.Features 5/32" (4mm) holes for ventilation. Finished in smooth black powder coat.
Chief PVP-2 — 2U Perforated Steel Vent Panel
2U steel vent panel with perforations for air circulation. Larger perforation holes than the FVP allow for better airflow and more visibility into the rack.Features 5/32" (4mm) holes for ventilation. Finished in smooth black powder coat.
Chief PVP-3 — 3U Perforated Steel Vent Panel
3U steel vent panel with perforations for air circulation. Larger perforation holes than the FVP allow for better airflow and more visibility into the rack.Features 5/32" (4mm) holes for ventilation. Finished in smooth black powder coat.
Chief PVP-4 — 4U Perforated Steel Vent Panel
4U steel vent panel with perforations for air circulation. Larger perforation holes than the FVP allow for better airflow and more visibility into the rack.Features 5/32" (4mm) holes for ventilation. Finished in smooth black powder coat.
Chief PWRD-40 — Steel Door for PWR-40-24 Rack
Door for 40U PWR rack in solid steel. This Product Has Been Discontinued. Please see PWRD-40P or PWRD-40PLX.Features Includes lock. Door can be reversed for right or left handed opening.
Chief PWRD-40P — Perforated Steel Door for PWR-40-24 Rack
Door for 40U PWR rack in perforated steel.Features Includes lock. Door can be reversed for right or left handed opening. Perforated steel improved airflow in passively cooled rack systems.
Chief PWRD-40PLX — Plexiglas Door for PWR-40-24 Rack
Door for 40U PWR rack in Plexiglas.Features Includes lock. Door can be reversed for right or left handed opening. Smoked Plexiglas allows visibility into rack but cuts down glare of indicator lights.
Chief QMP1C — CPU Mounts for Music Production Center
CPU mount works with almost any desktop computer to attach it to a Music Production Center base.Features Tool free depth adjustment to hold CPUs up to 7.5" (191mm) deep and up to 18" (457mm) high.
Chief QMP1KB — Keyboard Tray for Music Production Center
Black laminate articulating keyboard tray works with the Music Production Center tabletops to keep your keyboard and mouse in the correct position.Features Weight capacity 10 lbs.
Chief QMP1KH — Keyboard Tray for Music Production Center
Mahogany laminate articulating keyboard tray works with the Music Production Center tabletops to keep your keyboard and mouse in the correct position.Features Weight capacity 10 lbs.
Chief QMP1L — Laptop Shelf for Music Production Center
Laptop shelf attached to the Music Production Center base to put your laptop at the right height for your work. DISCONTINUED. See QMP2L for replacement. Features Centris Technology uses the center of gravity to balance the laptop, providing easy finger adjustments. Single arm design allows extension up to 20" (508 mm). Easy installation, ships fully assembled.
Chief QMP1MK — Music Keybaord Stand for Music Production Center
Music keyboard stand supports keyboards up to 70 lbs. so you can record right at your workstation.Features Can be mounted at any point from top to bottom of Music Production Center
Chief QMP1MM2 — Dual Monitor Mount for Music Production Center
Dual monitor mount connects to the Music Production Center base.Features Max Screen Width: 22.7" (577 mm). Weight Capacity: 70 lbs (31.8 kg) total, 35 lbs (15.9 kg) per screen. VESA Compatibility: 75 x 75 mm and 100 x 100 mm.
Chief QMP1TB — Tabletop for Music Production Center
Black laminate tabletop to attach to the Music Production Center base to support mixer, control surfaces, or other peripherals you need.Features 20" X 36" Tabletop allow for large peripherals and lot of room to work. Support up to 50 lbs. Easily attaches to the Music Production Center at any height. Finished in Black Laminate.
Chief QMP1TH — Tabletop for Music Production Center
Mahogany laminate tabletop to attach to the Music Production Center base to support mixer, control surfaces, or other peripherals you need.Features 20" X 36" Tabletop allow for large peripherals and lot of room to work. Support up to 50 lbs. Easily attaches to the Music Production Center at any height. Finished in Mahogany Laminate.
Chief QMP2L — Laptop Shelf for Music Production Center
Laptop shelf attached to the Music Production Center base to put your laptop at the right height for your work.
Chief QMP2MM1 — Single Monitor Mount for Music Production Center
Single monitor mount connects to the Music Production Center base and adjust in all directions to keep your monitor where you need it.
Chief RB-22B — 22" Wide Rack Bridge for Config-u-Raxx Systems
22" wide rack bridge in Ebony Fleck laminate provides extra space above Config-U-Raxx sidewings.   Config - U - Raxx products and accessories will be discontinued January, 1st 2014Features 18" shelf depth. Shelf height is adjustable from 2" to 12" above the desk surface.
Chief RB-22M — 22" Wide Rack Bridge for Config-u-Raxx Systems
22" wide rack bridge in Maple laminate provides extra space above Config-U-Raxx sidewings.   Config - U - Raxx products and accessories will be discontinued January, 1st 2014Features 18" shelf depth. Shelf height is adjustable from 2" to 12" above the desk surface.
Chief RB-36B — 36" Wide Rack Bridge for Config-u-Raxx Systems
36" wide rack bridge in Ebony Fleck laminate provides extra space above Config-U-Raxx desks.     Config - U - Raxx products and accessories will be discontinued January, 1st 2014Features 18" shelf depth. Shelf height is adjustable from 2" to 12" above the desk surface.
Chief RB-36M — 36" Wide Rack Bridge for Config-u-Raxx Systems
36" wide rack bridge in Maple laminate provides extra space above Config-U-Raxx desks.     Config - U - Raxx products and accessories will be discontinued January, 1st 2014Features 18" shelf depth. Shelf height is adjustable from 2" to 12" above the desk surface.
Chief RB-46B — 46" Wide Rack Bridge for Config-u-Raxx Systems
46" wide rack bridge in Ebony Fleck laminate provides extra space above Config-U-Raxx desks.     Config - U - Raxx products and accessories will be discontinued January, 1st 2014Features 18" shelf depth. Shelf height is adjustable from 2" to 12" above the desk surface.
Chief RB-46M — 46" Wide Rack Bridge for Config-u-Raxx Systems
46" wide rack bridge in Maple laminate provides extra space above Config-U-Raxx desks.     Config - U - Raxx products and accessories will be discontinued January, 1st 2014Features 18" shelf depth. Shelf height is adjustable from 2" to 12" above the desk surface.
Chief RB-60B — 60" Wide Rack Bridge for Config-u-Raxx Systems
60" wide rack bridge in Ebony Fleck laminate provides extra space above Config-U-Raxx desks.   Config - U - Raxx products and accessories will be discontinued January, 1st 2014Features 18" shelf depth. Shelf height is adjustable from 2" to 12" above the desk surface.
Chief RB-60M — 60" Wide Rack Bridge for Config-u-Raxx Systems
60" wide rack bridge in Maple laminate provides extra space above Config-U-Raxx desks.     Config - U - Raxx products and accessories will be discontinued January, 1st 2014Features 18" shelf depth. Shelf height is adjustable from 2" to 12" above the desk surface.
Chief RCA-2A — Modular Panels for RCA Connectors (Discontinued)
Modular system panels designed to fit 2 RCA connectors. DISCONTINUED JULY, 2014Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief RCA-3A — Modular Panels for RCA Connectors (Discontinued)
Modular system panels designed to fit 3 RCA connectors. DISCONTINUED JULY, 2014.Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief RCA-4A — Modular Panels for RCA Connectors (Discontinued)
Modular system panels designed to fit 4 RCA connectors. DISCONTINUED JULY, 2014Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief RCA-6A — Modular Panels for RCA Connectors (Discontinued)
Modular system panels designed to fit 6 RCA connectors. DISCONTINUED JULY, 2014Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief RCA-8A — Modular Panels for RCA Connectors (Discontinued)
Modular system panels designed to fit 8 RCA connectors. DISCONTINUED JULY, 2014Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief RCM — Cable Manager for RFM Racks
20U tall (36") cable manager attaches to the side of RFM racks to keep large bundles of cables organized. Image shows two RCMs mounted onto an RFM rack. Rack sold separately.
Chief RDVD-CL — Rack Mounted DVD Shelf in Clear Anodized Aluminum
Brushed Clear anodized aluminum rack mounted DVD shelf keeps 25 DVDs organized and where you need them.
Chief RKRL10SPACE — 10U Pair of Rack Rail
10U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL11SPACE — 11U Pair of Rack Rail
11U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL12SPACE — 12U Pair of Rack Rail
12U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL13SPACE — 13U Pair of Rack Rail
13U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL14SPACE — 14U Pair of Rack Rail
14U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL15SPACE — 15U Pair of Rack Rail
15U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL16SPACE — 16U Pair of Rack Rail
16U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL17SPACE — 17U Pair of Rack Rail
17U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL18SPACE — 18U Pair of Rack Rail
18U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL19SPACE — 19U Pair of Rack Rail
19U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL1SPACE — 1U Pair of Rack Rail
1U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL20SPACE — 20U Pair of Rack Rail
20U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL21SPACE — 21U Pair of Rack Rail
21U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL22SPACE — 22U Pair of Rack Rail
22U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL23SPACE — 23U Pair of Rack Rail
23U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL24SPACE — 24U Pair of Rack Rail
24U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL25SPACE — 25U Pair of Rack Rail
25U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL26SPACE — 26U Pair of Rack Rail
26U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL27SPACE — 27U Pair of Rack Rail
27U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL28SPACE — 28U Pair of Rack Rail
28U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL29SPACE — 29U Pair of Rack Rail
29U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL2SPACE — 2U Pair of Rack Rail
2U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL30SPACE — 30U Pair of Rack Rail
30U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL31SPACE — 31U Pair of Rack Rail
31U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL32SPACE — 32U Pair of Rack Rail
32U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL33SPACE — 33U Pair of Rack Rail
33U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL34SPACE — 34U Pair of Rack Rail
34U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL35SPACE — 35U Pair of Rack Rail
35U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL36SPACE — 36U Pair of Rack Rail
36U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL37SPACE — 37U Pair of Rack Rail
37U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL38SPACE — 38U Pair of Rack Rail
38U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL39SPACE — 39U Pair of Rack Rail
39U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL3SPACE — 3U Pair of Rack Rail
3U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL40SPACE — 40U Pair of Rack Rail
40U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL41SPACE — 41U Pair of Rack Rail
41U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL42SPACE — 42U Pair of Rack Rail
42U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL43SPACE — 43U Pair of Rack Rail
43U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL44SPACE — 44U Pair of Rack Rail
44U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL45SPACE — 45U Pair of Rack Rail
45U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL4SPACE — 4U Pair of Rack Rail
4U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL5SPACE — 5U Pair of Rack Rail
5U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL6SPACE — 6U Pair of Rack Rail
6U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL7SPACE — 7U Pair of Rack Rail
7U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL8SPACE — 8U Pair of Rack Rail
8U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RKRL9SPACE — 9U Pair of Rack Rail
9U steel rack rail with holes tapped for 10-32 screws. E-Coat finish ensures threads are never clogged. Sold in pairs.Features Sturdy 11 gauge steel.
Chief RME-12 — Rack Mount Ears for Mackie Mixers
A replacement rack-mount hardware kit for Mackie® mixers - MACKIE1202VLZPRO.
Chief RME-14 — Rack Mount Ears for Mackie Mixers
A replacement rack-mount hardware kit for Mackie® mixers - MACKIE1402VLZPRO.
Chief ROTRS — Shelves for ROTR, ROTR-XL, POTR, and POTR-XL Racks
Steel shelf for rotating rack systems (ROTR, ROTR-XL, POTR, POTR-XL). Not compatible with the ROTR-HD.
Chief RSG-10 — 10" Round Speaker Grill
10" steel round speaker grill is an easy way to finish off and protect your speakers. Sold individually.
Chief RSG-12 — 12" Round Speaker Grill
12" steel round speaker grill is an easy way to finish off and protect your speakers. Sold individually.
Chief RSG-15 — 15" Round Speaker Grill
15" steel round speaker grill is an easy way to finish off and protect your speakers. Sold individually.
Chief RSG-18 — 18" Round Speaker Grill
18" steel round speaker grill is an easy way to finish off and protect your speakers. Sold individually.
Chief RSG-8 — 8" Round Speaker Grill
8" steel round speaker grill is an easy way to finish off and protect your speakers. Sold individually.
Chief S16U — 1U Specialty Panel for 16 Male or Female XLR Connectors
1U panel designed to hold 16 male or female XLR connectors.
Chief SCDR-12 — 12U Steel Security Door
12U solid steel security door with dual locks that mounts to the rack rails of your rack. Discontinued April 1, 2015Features Keeps multiple components secure behind a single door.
Chief SCDR-16 — 16U Steel Security Door
16U solid steel security door with dual locks that mounts to the rack rails of your rack. Discontinued April 1, 2015Features Keeps multiple components secure behind a single door.
Chief SCDR-20 — 20U Steel Security Door
20U solid steel security door with dual locks that mounts to the rack rails of your rack. Discontinued April 1, 2015Features Keeps multiple components secure behind a single door.
Chief SCDR-8 — 8U Steel Security Door
8U solid steel security door with dual locks that mounts to the rack rails of your rack. Discontinued April 1, 2015Features Keeps multiple components secure behind a single door.
Chief SDR-2 — 2U Heavy-Duty Rack Drawer
2U heavy-duty sliding rack drawer with electrical knockouts in the rear with latch. Finished in Black Wrinkle powder coat.
Chief SDR-2-L — 2U Locking Heavy-Duty Rack Drawer
2U heavy-duty sliding rack drawer with electrical knockouts in the rear with latch. Finished in Black Wrinkle powder coat. Includes pre-installed lock.
Chief SDR-2A — 2U Heavy-Duty Rack Drawer - Black Anodized
2U heavy-duty sliding rack drawer with electrical knockouts in the rear with latch. Finished in Brushed Black anodized aluminum.
Chief SDR-2A-L — 2U Locking Heavy-Duty Rack Drawer - Black Anodized
2U heavy-duty sliding rack drawer with electrical knockouts in the rear with latch. Finished in Brushed Black anodized aluminum. Includes pre-installed lock.
Chief SDR-3 — 3U Heavy-Duty Rack Drawer
3U heavy-duty sliding rack drawer with electrical knockouts in the rear with latch. Finished in Black Wrinkle powder coat.
Chief SDR-3-L — 3U Locking Heavy-Duty Rack Drawer
3U heavy-duty sliding rack drawer with electrical knockouts in the rear with latch. Finished in Black Wrinkle powder coat. Includes pre-installed lock.
Chief SDR-3A — 3U Heavy-Duty Rack Drawer - Black Anodized
3U heavy-duty sliding rack drawer with electrical knockouts in the rear with latch. Finished in Brushed Black anodized aluminum.
Chief SDR-4 — 4U Heavy-Duty Rack Drawer
4U heavy-duty sliding rack drawer with electrical knockouts in the rear with latch. Finished in Black Wrinkle powder coat.
Chief SDR-4-L — 4U Locking Heavy-Duty Rack Drawer
4U heavy-duty sliding rack drawer with electrical knockouts in the rear with latch. Finished in Black Wrinkle powder coat. Includes pre-installed lock.
Chief SDR-4A — 4U Heavy-Duty Rack Drawer - Black Anodized
4U heavy-duty sliding rack drawer with electrical knockouts in the rear with latch. Finished in Brushed Black anodized aluminum.
Chief SEC-1 — 1U Steel Security Cover
1U perforated security cover provides ventilation while preventing tampering.Features Attaches with two screws to allow you to mount equipment into the rack then apply the security cover over the top. 5/32" (4mm) perforation holes in cover for ventilation.
Chief SEC-2 — 2U Steel Security Cover
2U perforated security cover provides ventilation while preventing tampering.Features Attaches with two screws to allow you to mount equipment into the rack then apply the security cover over the top. 5/32" (4mm) perforation holes in cover for ventilation.
Chief SEC-3 — 3U Steel Security Cover
3U perforated security cover provides ventilation while preventing tampering.Features Attaches with two screws to allow you to mount equipment into the rack then apply the security cover over the top. 5/32" (4mm) perforation holes in cover for ventilation.
Chief SFG-1 — 1U Steel Blank Panels - Flanged
1U steel panel for closing up gaps between rack equipment and improving the rack's thermal characteristics. Flanged for extra strength. Black wrinkle powder coated steel.Features 16 gauge steel. 1/2" (13mm) return flange for strength.
Chief SFG-1-MP10 — SFG-1 MULTI-PACK, 10 PER PACK
10 Pack of 1U steel panels for closing gaps between rack equipment and improving the rack's thermal characteristics. Flanged for extra strength. Black wrinkle powder coated steel. Package designed for easy access to panels.Features 16 gauge steel. 1/2" (13mm) return flange for strength.TAA compliant.
Chief SFG-2 — 2U Steel Blank Panels - Flanged
2U steel panel for closing up gaps between rack equipment and improving the rack's thermal characteristics. Flanged for extra strength. Black wrinkle powder coated steel.Features 16 gauge steel. 1/2" (13mm) return flange for strength.
Chief SFG-2-MP10 — SFG-2 MULTI-PACK, 10 PER PACK
10 Pack of 2U steel panels for closing gaps between rack equipment and improving the rack's thermal characteristics. Flanged for extra strength. Black wrinkle powder coated steel. Package designed for easy access to panels.Features 16 gauge steel. 1/2" (13mm) return flange for strength.TAA compliant.
Chief SFG-3 — 3U Steel Blank Panels - Flanged
3U steel panel for closing up gaps between rack equipment and improving the rack's thermal characteristics. Flanged for extra strength. Black wrinkle powder coated steel.Features 16 gauge steel. 1/2" (13mm) return flange for strength.
Chief SFG-3-MP10 — SFG-3 MULTI-PACK, 10 PER PACK
10 Pack of 3U steel panels for closing gaps between rack equipment and improving the rack's thermal characteristics. Flanged for extra strength. Black wrinkle powder coated steel. Package designed for easy access to panels.Features 16 gauge steel. 1/2" (13mm) return flange for strength.TAA compliant.
Chief SFG-4 — 4U Steel Blank Panels - Flanged
4U steel panel for closing up gaps between rack equipment and improving the rack's thermal characteristics. Flanged for extra strength. Black wrinkle powder coated steel.Features 16 gauge steel. 1/2" (13mm) return flange for strength.TAA Compliant.
Chief SFG-4-MP10 — SFG-4 MULTI-PACK, 10 PER PACK
10 Pack of 4U steel panels for closing gaps between rack equipment and improving the rack's thermal characteristics. Flanged for extra strength. Black wrinkle powder coated steel. Package designed for easy access to panels.Features 16 gauge steel. 1/2" (13mm) return flange for strength.TAA compliant.
Chief SFG-5 — 5U Steel Blank Panels - Flanged
5U steel panel for closing up gaps between rack equipment and improving the rack's thermal characteristics. Flanged for extra strength. Black wrinkle powder coated steel.Features 16 gauge steel. 1/2" (13mm) return flange for strength.TAA compliant
Chief SFG-6 — 6U Steel Blank Panels - Flanged
6U steel panel for closing up gaps between rack equipment and improving the rack's thermal characteristics. Flanged for extra strength. Black wrinkle powder coated steel.Features 16 gauge steel. 1/2" (13mm) return flange for strength.TAA compliant.
Chief SFG-7 — 7U Steel Blank Panels - Flanged
7U steel panel for closing up gaps between rack equipment and improving the rack's thermal characteristics. Flanged for extra strength. Black wrinkle powder coated steel.Features 16 gauge steel. 1/2" (13mm) return flange for strength.TAA compliant.
Chief SFRK-4B — 4U Rack For Use in Place of 22" Rack Bridges for Config-u-Raxx Systems
Rack bridges provide extra space you need on your Config-U-Raxx setup. Height adjustable and finished to match the Config-U-Raxx center desks and sidewings.     Config - U - Raxx products and accessories will be discontinued January, 1st 2014Features 22" width can be used over top of side wings. Adds an extra 4U of usable rack space. Ebony fleck laminate.
Chief SFRK-4M — 4U Rack For Use in Place of 22" Rack Bridges for Config-u-Raxx Systems
Rack bridges provide extra space you need on your Config-U-Raxx setup. Height adjustable and finished to match the Config-U-Raxx center desks and sidewings.     Config - U - Raxx products and accessories will be discontinued January, 1st 2014Features 22" width can be used over top of side wings. Adds an extra 4U of usable rack space. Note: image shows Ebony fleck laminate instead of maple.
Chief SFT-1 — 1U Steel Blank Panels - Flat
1U steel panel for closing up gaps between rack equipment and improving the rack's thermal characteristics. Black wrinkle powder coated steel.Features 14 gauge steel.
Chief SFT-1-MP10 — SFT-1 MULTI-PACK, 10 PER PACK
10 Pack of 1U steel panel for closing up gaps between rack equipment and improving the rack's thermal characteristics. Black wrinkle powder coated steel. Package designed for easy access to panels.Features 14 gauge steel.
Chief SFT-2 — 2U Steel Blank Panels - Flat
2U steel panel for closing up gaps between rack equipment and improving the rack's thermal characteristics. Black wrinkle powder coated steel.Features 14 gauge steel.
Chief SFT-2-MP10 — SFT-2 MULTI-PACK, 10 PER PACK
10 Pack of 2U steel panel for closing up gaps between rack equipment and improving the rack's thermal characteristics. Black wrinkle powder coated steel. Package designed for easy access to panels.Features 14 gauge steel.
Chief SFT-3 — 3U Steel Blank Panels - Flat
3U steel panel for closing up gaps between rack equipment and improving the rack's thermal characteristics. Black wrinkle powder coated steel.Features 14 gauge steel.
Chief SFT-3-MP10 — SFT-3 MULTI-PACK, 10 PER PACK
10 Pack of 3U steel panel for closing up gaps between rack equipment and improving the rack's thermal characteristics. Black wrinkle powder coated steel. Package designed for easy access to panels.Features 14 gauge steel.
Chief SFT-4 — 4U Steel Blank Panels - Flat
4U steel panel for closing up gaps between rack equipment and improving the rack's thermal characteristics. Black wrinkle powder coated steel.Features 14 gauge steel.
Chief SFT-4-MP10 — SFT-4 MULTI-PACK, 10 PER PACK
10 Pack of 4U steel panel for closing up gaps between rack equipment and improving the rack's thermal characteristics. Black wrinkle powder coated steel. Package designed for easy access to panels.Features 14 gauge steel.
Chief SFT-5 — 5U Steel Blank Panels - Flat
5U steel panel for closing up gaps between rack equipment and improving the rack's thermal characteristics. Black wrinkle powder coated steel.Features 14 gauge steel.
Chief SFT-6 — 6U Steel Blank Panels - Flat
6U steel panel for closing up gaps between rack equipment and improving the rack's thermal characteristics. Black wrinkle powder coated steel.Features 14 gauge steel.
Chief SFT-7 — 7U Steel Blank Panels - Flat
7U steel panel for closing up gaps between rack equipment and improving the rack's thermal characteristics. Black wrinkle powder coated steel.Features 14 gauge steel.
Chief SLS-1 — 1U Sliding Shelf, 16 to 20" Deep
1U sliding shelf connects to front and rear rack rails between 16" and 20" deep. Allows quick access to any equipment mounted onto shelf.Features 100 lb. weight rating. Extends 14". Shelf surface 16" X 14.25".TAA compliant.
Chief SLS-1.5 — 2U Sliding Shelf, 15.25 to 24" Deep
2U sliding shelf connects to front and rear rack rails between 15.25" and 24" deep. Locks in open or closed position for added stability. Allows quick access to any equipment mounted onto shelf.Features 60 lb. weight rating. Extends 14". Shelf surface 17.5" X 14.5". Shelf can be locked in the in or out positionTAA compliant
Chief STOP-6 — 6" Pop Filter
6" Pop filter is threaded to connect to a microphone stand. Helps prevent unwanted sounds during recording.
Chief STOP-8 — 8" Pop Filter
8" Pop filter is threaded to connect to a microphone stand. Helps prevent unwanted sounds during recording.
Chief STSW-25 — 25 Pc. Stainless Steel Rack Screws
25 pieces of 10-32 X .75" stainless screws feature a translucent washer to blend in with silver panels and equipment. Delivered in a plastic clam-shell container.Features TAA compliant
Chief SWRD-10 — Steel Door for 10U SWR Rack
10U doors for SWR racks in solid steel. Discontinued May 1, 2015. Replaced by NW1D12SFeatures Includes lock. Door can be reversed for right or left handed opening. TAA compliant.
Chief SWRD-10P — Perforated Steel Door for 10U SWR Rack
10U doors for SWR racks in perforated steel. Discontinued May 1, 2015. Replaced by NW1D12FFeatures Includes lock. Door can be reversed for right or left handed opening. Perforated steel improved airflow in passively cooled rack systems.TAA compliant.
Chief SWRD-10PLX — Plexiglas Door for 10U SWR Rack
10U doors for SWR racks in Plexiglas. Discontinued May 1, 2015. Replaced by NW1D12PFeatures Includes lock. Door can be reversed for right or left handed opening. Smoked Plexiglas allows visibility into rack but cuts down glare of indicator lights.TAA compliant.
Chief SWRD-18 — Steel Door for 18U SWR Rack
18U doors for SWR racks in solid steel. Discontinued May 1, 2015. Replaced by NW1D20SFeatures Includes lock. Door can be reversed for right or left handed opening. TAA compliant.
Chief SWRD-18P — Perforated Steel Door for 18U SWR Rack
18U doors for SWR racks in perforated steel. Discontinued May 1, 2015. Replaced by NW1D20FFeatures Includes lock. Door can be reversed for right or left handed opening. Perforated steel improved airflow in passively cooled rack systems.TAA compliant
Chief SWRD-18PLX — Plexiglas Door for 18U SWR Rack
18U doors for SWR racks in Plexiglas. Discontinued May 1, 2015. Replaced by NW1D20PFeatures Includes lock. Door can be reversed for right or left handed opening. Smoked Plexiglas allows visibility into rack but cuts down glare of indicator lights.TAA compliant.
Chief SWRD-24 — Steel Door for 24U SWR Rack
24U doors for SWR racks in solid steel. Discontinued May 1, 2015. Replaced by NW1D28SFeatures Includes lock. Door can be reversed for right or left handed opening. TAA compliant.
Chief SWRD-24P — Perforated Steel Door for 24U SWR Rack
24U doors for SWR racks in perforated steel. Discontinued May 1, 2015. Replaced by NW1D28FFeatures Includes lock. Door can be reversed for right or left handed opening. Perforated steel improved airflow in passively cooled rack systems.TAA compliant.
Chief SWRD-24PLX — Plexiglas Door for 24U SWR Rack
24U doors for SWR racks in Plexiglas. Discontinued May 1, 2015. Replaced by NW1D28PFeatures Includes lock. Door can be reversed for right or left handed opening. Smoked Plexiglas allows visibility into rack but cuts down glare of indicator lights.TAA compliant.
Chief TBA — Wide Aluminum Tie Bar
1" wide aluminum horizontal tie bars keep cables organized. Discontinued April 1, 2015. Replaced by TBL
Chief TBL — L-Shaped Tie Bar
L-shaped horizontal tie bars feature oblong cutout on both sides of the "L" to keep cable ties from moving.
Chief TBLO — 4" Offset L-Shaped Tie Bar
4" off-set L-shaped horizontal tie bars feature oblong cutout on both sides of the "L" to keep cable ties from moving.Features TAA compliant
Chief TBO — 4" Offset Round Rod Tie Bar
4" off-set round rod horizontal tie bars keep cables organized.
Chief TBS — Round Rod Tie Bar
Round rod horizontal tie bars keep cables organized.
Chief TKV-P — Toe Kick Vent
Vent designed to fit into the toe kick of furniture. Passive vent design improves ventilation through convection. Fits a 2" X 15.5" opening.
Chief TR-2 — 2U Trap Shelf
2U trap shelf holds non-rack mount equipment down to prevent movement during transportation and use.Features Two bars span the width of the shelf to hold components down. Bottom side of bars is padded to prevent damage to equipment.
Chief TR-3 — 3U Trap Shelf
3U trap shelf holds non-rack mount equipment down to prevent movement during transportation and use.Features Two bars span the width of the shelf to hold components down. Bottom side of bars is padded to prevent damage to equipment.
Chief TR-4 — 4U Trap Shelf
4U trap shelf holds non-rack mount equipment down to prevent movement during transportation and use.Features Two bars span the width of the shelf to hold components down. Bottom side of bars is padded to prevent damage to equipment.
Chief UNS-1 — 1U Universal Shelf
1U universal shelf is designed to accommodate both non-rack mount equipment and half-rack width equipment. Punched shelf bottom can be used to attach components and promotes good ventilation.Features 14 gauge steel
Chief UNS-1-MP10 — UNS-1 MULTI-PACK, 10 PER PACK
10 Pack of 1U universal shelf is designed to accommodate both non-rack mount equipment and half-rack width equipment. Punched shelf bottom can be used to attach components and promotes good ventilation. Package designed for easy access to the shelves and for retail display.Features 14 gauge steel. 10" deep.20 lb capacity.
Chief UTS-1 — 1U Utility Shelf
1U utility shelves in solid steel to hold non-rack mount equipment.Features 16 gauge steel. 10.75" deep.30 lb capacity.
Chief UTS-1-MP10 — UTS-1 MULTI-PACK, 10 PER PACK
10 Pack of 1U utility shelves in solid steel to hold non-rack mount equipment. Package designed for easy access to the shelves and for retail display.Features 16 gauge steel. 10.75" deep.30 lb capacity.
Chief UTS-2 — 2U Utility Shelf
2U utility shelves in solid steel to hold non-rack mount equipment.Features 16 gauge steel
Chief UTS-2-MP5 — UTS-2 MULTI-PACK, 5 PER PACK
5 Pack of 2U utility shelves in solid steel to hold non-rack mount equipment. Package designed for easy access to the shelves and for retail displayFeatures 16 gauge steel. 14.5" deep.30 lb capacity.
Chief UTS-3 — 3U Utility Shelf
3U utility shelves in solid steel to hold non-rack mount equipment.Features 16 gauge steel. 14.5" deep.80 lb capacity.
Chief UTS-4 — 4U Utility Shelf
4U utility shelves in solid steel to hold non-rack mount equipment.Features 16 gauge steel. 14.5" deep.80 lb capacity.
Chief UTVS-3-14 — 3U, 14" Deep Vented Utility Shelf
3U, 14" deep vented utility shelves holds non-rack mount equipment and provides ventilation to components.Features 50 lb. weight capacity.
Chief UTVS-3-18 — 3U, 18" Deep Vented Utility Shelf
3U, 18" deep vented utility shelves holds non-rack mount equipment and provides ventilation to components.Features 50 lb. weight capacity.
Chief VPL-1 — 1U Black Anodized Aluminum Vent Panel
1U Brushed Black anodized aluminum vent panel with slots for air circulation.Features 0.125" (3 mm) thick aluminum. Brushed black anodized aluminum.TAA compliant.
Chief VPL-2 — 2U Black Anodized Aluminum Vent Panel
2U Brushed Black anodized aluminum vent panel with slots for air circulation.Features 0.125" (3 mm) thick aluminum. Brushed black anodized aluminum.TAA compliant.
Chief VPL-3 — 3U Black Anodized Aluminum Vent Panel
3U Brushed Black anodized aluminum vent panel with slots for air circulation.Features 0.125" (3 mm) thick aluminum. Brushed black anodized aluminum.TAA compliant.
Chief XLR-1FA — Modual Panels for Female XLR Connectors (Discontinued)
Modular system panels designed to fit 1 female XLR connector. DISCONTINUED JULY, 2014.Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief XLR-1MA — Modual Panels for Male XLR Connectors (Discontinued)
Modular system panels designed to fit 1 male XLR connector. DISCONTINUED JULY, 2014.Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief XLR-2FA — Modual Panels for Female XLR Connectors (Discontinued)
Modular system panels designed to fit 2 female XLR connectors. DISCONTINUED JULY, 2014.Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief XLR-2MA — Modual Panels for Male XLR Connectors (Discontinued)
Modular system panels designed to fit 2 male XLR connectors. DISCONTINUED JULY, 2014. Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief XLR-3FA — Modual Panels for Female XLR Connectors (Discontinued)
Modular system panels designed to fit 3 female XLR connectors.  DISCONTINUED JULY, 2014.Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief XLR-3MA — Modual Panels for Male XLR Connectors (Discontinued)
Modular system panels designed to fit 3 male XLR connectors. DISCONTINUED JULY, 2014.Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief XLR-4FA — Modual Panels for Female XLR Connectors (Discontinued)
Modular system panels designed to fit 4 female XLR connectors. DISCONTINUED JULY, 2014. Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief XLR-4MA — Modual Panels for Male XLR Connectors (Discontinued)
Modular system panels designed to fit 4 male XLR connectors. DISCONTINUED JULY, 2014.Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief XLR-6FA — Modual Panels for Female XLR Connectors (Discontinued)
Modular system panels designed to fit 6 female XLR connectors. DISCONTINUED JULY, 2014.Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief XLR-6MA — Modual Panels for Male XLR Connectors (Discontinued)
Modular system panels designed to fit 6 male XLR connectors. DISCONTINUED JULY, 2014. Features Modular panel system allows you to easily make custom patch panels that are mounted in either rack mountable frames or wall boxes.
Chief YAMF1 — Monitor Mounts for F1 Series Racks
Height-adjustable monitor mount arm for use with F1 Series furniture racks. Is most usable with the 20U height.Features Centris Fingertip Tilt provides smooth tilt adjustment in all directions. Smooth extension to achieve ideal viewing angle. Fingertip height adjustment with customizable tension. Built-in cable management for a clean installation. Easy monitor installation with teardrop hole pattern. Portrait and landscape rotation and side-to-side pivot. VESA® 75 x 75 mm and 100 x 100 mm compliant

Для телевизоров

Chief ENS — Lateral Shift Accessory - Custom Length
Provides easy spanning of a 24" on-center stud system or 4" of lateral shift on either side of a 16" on-center stud system.
Chief ENSHW — Lateral Shift Accessory Hardware Kit
Provides easy spanning of a 24" on-center stud system or 4" of lateral shift on either side of a 16" on-center stud system.
Chief FAC501B — Small Flat Panel In-Wall Swing Arm Accessory
Designed to hide a swing arm mount in the wall this in-wall box takes installations to an even lower profile. Discontinued. See TA502 for replacement in-wall box along with TS118SU or TS218SU swing arm mounts.
Chief FCA100 — FUSION CAT5/Surge/CPU Adapter
Discontinued. See FCA110 for replacement. Use the FCA100 to install a surge protector, CAT5 converter, media player or small CPU behind the screen using FUSION mounts. Note: Not compatible with the Upgraded Fusion Mounts. Find a list of old and new Fusion mounts here. Check your mount's accessory tab for compatibility. The next generation of this solution is FCA110.
Chief FCA101 — FUSION Lock-Down Collar Accessory
FUSION's Lock-Down Collar Accessory allows you to lock down both the top pole and TV from being moved after installation. Discontinued. The latest Fusion upgrades incorporate this feature via set screws to keep the mount rigid, stable and secure throughout the life of the installation. 
Chief FCA102 — FCA102Спецпредложение
Адаптер CHIEF FCA102 (держатель кодека/медиаплеера/ПК за экран, для серии Fusion)
Chief FCA103 — держатель для AV компонентов FusionСпецпредложение
Денржатель АВ компонентов CHIEF FCA103 для креплений серии Fusion
Chief FCA104 — FUSION™ Component Shelf Extender
Extend the FUSION™ component shelves by 8.25" to accommodate larger displays up to 66" tall. Must order shelf in addition to the FCA104 Compatible with: FCS100 FVS100 FVS150 FCC100 FCD100 Features Extends shelves up to 8.25" Compatible with FCS100, FVS100, FVS150, FCD100 & FCC100 Includes extender only, must order shelf separately   Contact Customer Service at 952-894-6280 or toll-free in the U.S. at 800-582-6480. TAA Compliant
Chief FCA106 — FUSION Side Cover Accessory
Conceal cables and add a sleek look to the Fusion wall mounts with the new decorative cover.  Designed with easy installation in mind, the FCA106 ships with modified end caps that fit directly into the Fusion rails, holding the covers in place for a clean finish. 
Chief FCA110 — FUSION CAT5/Surge/CPU Adapter
Use the FCA110 to install a surge protector, CAT5 converter, media player or small CPU behind the screen using FUSION mounts.
Chief FCA112 — FUSION Secure CPU/Media Player Adapter
The FCA112 is a universal adapter that securely stores CPUs and media players.
Chief FCA113 — FUSION CPU Extender Accessory
For digital signage applications, many installers want to mount the content generating DMP or CPU near the display. Fusion mounts sit too close to the wall to leave room for larger CPUs. Installers want an option to extend the very popular Fusion mount further from the wall to give space to mount other devices.
Chief FCA1S — Fusion Single Stud Adaptor
Use with Medium Fusion fixed and tilt wall mounts for a single stud solution. Now shippingFeatures Allows the following be attached to a single stud rather than to dual studs
Chief FCA500 — Полка 18" для AV-компонентов
Полка CHIEF FCA500 18" для расположения AV-компонентов под TV-панелью, цвет черный
Chief FCA501 — FUSION™ 14" UPPER COMPONENT/VC SHELF
Install this shelf to place AV components or video conferencing equipment above a flat panel TV.
Chief FCA502 — полка 8" для AV-компонентов
Chief FCA503 — FUSION™ 24" Upper Component/ VC Shelf
Install this shelf to place AV components or video conferencing equipment above a flat panel TV.
Chief FCA510 — аксессуар для хранения AV компонентов FusionСпецпредложение
Аксессуар для хранения CHIEF FCA510 для креплений серии Fusion
Chief FCA515 — Fusion™ Medium Storage Accessory, PC
Install this storage accessory to safely store  PC's and media player devices behind your flat panel displays. This product is compatible with Fusion ceiling and floor carts and stands. Features Compatible with media player devices up to: (HxWxD) 15.5"x 15.5"x 4.5" (394 x 394 x 114)mm  Easy access to input/output connections  
Chief FCA520 — аксессуар для хранения AV компонентов FusionСпецпредложение
Аксессуар для хранения CHIEF FCA520 для креплений серии Fusion
Chief FCA530 — держатель центрального канала
Держатель центрального канала Chief FCA530, для креплений и стоек серии Fusion, нагрузка до 9 кг., цвет черный
Chief FCA535 — Side Speaker Adapters
The FCA535 left/right side speaker adapter is compatible with FUSION Series carts, stands, and flat panel ceiling mounts. 
Chief FCA540 — Fusion™ Power Outlet Accessory
Install this electrical outlet housing right where it's needed!  Can be installed directly to the back of single LCM ceiling mounts vertically or positioned horizontally anywhere along the newer FUSION™ crossbar.
Chief FCA611B — FUSION™ Small Height-Adjustable Accessory Shelf, Black
A small height adjustable shelf designed specifically for the FUSION™ LPAU and LFAU carts and stands.Features Clean aesthetics to be used for digtal signage or to hold components Quick installation and height adjustment TAA Compliant Contact Customer Service at 952-894-6280 or toll-free in the U.S. at 800-582-6480.
Chief FCA611S — FUSION™ Small Height-Adjustable Accessory Shelf, Silver
A small height adjustable shelf designed specifically for the FUSION™ LPAU and LFAU carts and stands.Features Clean aesthetics to be used for digtal signage or to hold components Quick installation and height adjustment   Contact Customer Service at 952-894-6280 or toll-free in the U.S. at 800-582-6480.
Chief FCA612B — FUSION™ Large Height-Adjustable Accessory Shelf, Black
A height adjustable shelf designed specifically for the FUSION™ MPAU, MFAU, LPAU, LFAU and XPAU carts and stands. 
Chief FCA612S — FUSION™ Large Height-Adjustable Accessory Shelf, Silver
A height adjustable shelf designed specifically for the FUSION™ MPAU, MFAU, LPAU, LFAU and XPAU carts and stands. 
Chief FCA623B — FUSION Dual Monitor Accessory for XPAU and XVAU Carts
Convert a Chief XPAU XL Cart or XVAU Video Conferencing cart into a dual monitor configuration. Makes an elegant and extremely functional video conferencing system when combined with one of Chief's FCA5XX camera shelves.
Chief FCA623S — для размещения 2-х панелей бок-о-бок на XPAU или XVAU
Аксессуар для тележки Chief FCA623S для размещения 2х панелей бок-о-бок на XPAU или XVAU
Chief FCA650B — FUSION™ Carts and Stands Large CPU Holder
Large FUSION™ CPU or Media Player holder for LPAU and LFAU carts and stands.Features Rounded aesthetic to match look of carts and stands Optional security with use of pad lock like the PAC138 Mounts to side of column or on back of the cart / stand's head Easy access to cable connections and buttons Well ventilated TAA Compliant   Contact Customer Service at 952-894-6280 or toll-free in the U.S. at 800-582-6480.
Chief FCA650S — FUSION™ Carts and Stands Large CPU Holder
Large FUSION™ CPU or Media Player holder for LPAU and LFAU carts and stands.Features Rounded aesthetic to match look of carts and stands Optional security with use of pad lock like the PAC138 Mounts to side of column or on back of the cart / stand's head Easy access to cable connections and buttons Well ventilated   Contact Customer Service at 952-894-6280 or toll-free in the U.S. at 800-582-6480.
Chief FCA651B — FUSION™ Carts and Stands Medium CPU Holder
Medium FUSION™ CPU or Media Player holder for LPAU and LFAU carts and stands.Features Rounded aesthetic to match look of carts and stands Optional security with use of pad lock like the PAC138 Mounts to side of column or on back of the cart / stand's head Easy access to cable connections and buttons Well ventilated TAA Compliant   Contact Customer Service at 952-894-6280 or toll-free in the U.S. at 800-582-6480.
Chief FCA651S — FUSION™ Carts and Stands Medium CPU Holder
Medium FUSION™ CPU or Media Player holder for LPAU and LFAU carts and stands.Features Rounded aesthetic to match look of carts and stands Optional security with use of pad lock like the PAC138 Mounts to side of column or on back of the cart / stand's head Easy access to cable connections and buttons Well ventilated   Contact Customer Service at 952-894-6280 or toll-free in the U.S. at 800-582-6480.
Chief FCA776 — FUSION™ LVM Leveling Feet Accessory
Create a more permanent video wall solution with the LVM Freestanding Video Wall and Leveling Feet. Remove the casters of the LVM and install these FCA776 leveling feet. Six leveling feet included.  One FCA776 contains six feet, and two are required per leg of the LVM.
Chief FCA800 — полка центральная 8" на крепеление Fusion
Полка Chief FCA820 центальная на крепление серии Fuison, ширина 20 см., нагрузка до 4,5 кг.
Chief FCA801 — Fusion 14" Above/Below Shelf for Large Displays
Install these accessories to apply AV components or video conferencing equipment with your display. The following accessories are compatible with all Fusion Series mounts.
Chief FCA802 — полка 18", под панель, нагрузка до 9 кг.
Полка Chief FCA802 для размещения AV компонентов под панелью, совместима со стойками, настенными и потолочными креплениями, нагрузка до 9 кг., цвет черный
Chief FCA810 — Fusion 8" Above/Below Shelf for XL Displays
Install these accessories to apply AV components or video conferencing equipment with your display. The following accessories are compatible with all Fusion Series mounts.
Chief FCA811 — Fusion 14" Above/Below Shelf for XL Displays
Install these accessories to apply AV components or video conferencing equipment with your display. The following accessories are compatible with all Fusion Series mounts.
Chief FCA812 — Fusion Lower Component Shelf, XL displays
Install this accessory to add AV components or video conferencing equipment with your display.  The FCA812 is compatible with all Fusion Series mounts.   Carts   Stands   Ceiling   Wall  Dimensions and specifications dependent on application type: wall, ceiling, freestanding.
Chief FCA820 — Fusion Center Camera Shelf - 8"
Install these accessories to apply AV components or video conferencing equipment with your display. The following accessories are compatible with all Fusion Series mounts.
Chief FCA821 — Fusion Center Camera Shelf - 14"
Install these accessories to apply AV components or video conferencing equipment with your display. The following accessories are compatible with all Fusion Series mounts.
Chief FCA830 — Fusion Center Channel Speaker, Large Displays
Install these accessories to apply AV components or video conferencing equipment with your display. The following accessories are compatible with all Fusion Series mounts.
Chief FCA831 — Fusion Side Channel Speaker Adaptor
Install these accessories to apply AV components or video conferencing equipment with your display. The following accessories are compatible with all Fusion Series mounts.
Chief FCA840 — Fusion Center Channel Speaker, XL Displays
Install these accessories to apply AV components or video conferencing equipment with your display. The following accessories are compatible with all Fusion Series mounts.
Chief FCA841 — Fusion Side Channel Speaker Adapter, XL Displays
Install these accessories to apply AV components or video conferencing equipment with your display. The following accessories are compatible with all Fusion Series mounts.
Chief FCACLIPS — стяжка для организации кабелей у продуктов FUSION
FCC100 держатель центрального канала на серию Fusion
Полка FCD100 двухуровневая под кронштейн новой серии Fusion (необходимый дозаказ - FVS100, FVS150 или FCS100)
Chief FCK000 — соединитель к-т 2 шт. скрытыйСпецпредложение
Элементы соединительные Chief FCK000 скрытого монтажа (для соединения в ряд кронштейнов новой серии Fusion)
Chief FCK008 — FCK008Спецпредложение
Элементы соединительные FCK008 длиной 20см (для соединения в ряд кронштейнов новой серии Fusion)
Элементы соединительные FCK016 длиной 40см (для соединения в ряд кронштейнов новой серии Fusion)
Chief FCS100 — FUSION Component Shelf
Discontinued. See FCA802 for replacement. Install this shelf to place AV components below a flat panel TV.
Chief FHB3038 — Fusion Vesa Adaptor
Allows for compatibility with vertical mounting patterns of 800 - 1000 mm. Now shipping 
Chief FHB5038 — FUSION Vesa Adaptor
Allows for compatibility with vertical mounting patterns of 800 - 1000 mm. Now shipping  
Chief FHB5077 — Fusion Wall Large Mount 500 mm Adaptor
Allows for compatibility with vertical mounting patterns up to 500 mm. Available September 28, 2015
Chief FHB7038 — FUSION Vesa Adaptor
Allows for compatibility with vertical mounting patterns of 800 - 1000 mm. Now shipping
Chief FHBU — Universal Hardware Kit for Large and Medium FUSION
Hardware kit that ships with Medium and Large Universal FUSION Mounts.
Chief FHBU2 — Universal Hardware Kit for XL FUSION
Hardware kit that ships with XL Universal FUSION Mounts.
Chief FLR100 — FUSION Left/Right Speaker Adapter
Discontinued. See FCA831 for replacement. The FLR100 allows easy integration of right and left speakers with Chief's FUSION mounting solutions.
Chief FSB4041 — Small Flat Panel Interface Bracket, 200 x 200mm VESA, M8
The FSB4041 is the perfect solution for interfacing with a variety of displays with 200x200mm VESA patterns with M8 hardware.  Use with most Chief monitor or flat panel mounts.
Chief FSB4073 — 50x50mm VESA Interface Bracket
The FSB4073 50x50mm VESA Interface Bracket, paired with a number of compatible Chief mounts, provides an easy mounting solution for a variety of small form-factor Digital Signage displays that utilize 50x50mm mounting patterns. Note: image is not representative of FSB4073 Interface - see Installation Manual or Technical Drawing for details.
Chief FSB4090B — Custom Interface Bracket for Cisco EX90 and K2-series Mounts
Custom design allows the Cisco EX90 to be installed on Chief's Kontour K2-series mounts.
Chief FSB4100B — Small Flat Panel Interface Brackets
Custom interface bracket compatible with all Chief F-series and K-series mounts (except the FSR and FTR). Discontinued April 1, 2015. Replaced by mounts that are already VESA 100 and 75 compatible (FSR4100, FTR4100, F/K Series and TS1 series)
Chief FSB4100S — Small Flat Panel Interface Brackets
Custom interface bracket compatible with all Chief F-series and K-series mounts (except the FSR and FTR). Discontinued April 1, 2015. Replaced by mounts that are already VESA 100 and 75 compatible (FSR4100, FTR4100, F/K Series and TS1 series)
Chief FSB4101B — Small Flat Panel Interface Bracket - 200mm x 100mm VESA Interface
The FSB4101B interface bracket is compatible with all Chief small flat panel and monitor mounts (except the FSR and FTR), and provides an interface to any display with a 200mm x 100mm VESA pattern. Discontinued April 1, 2015. Replaced by FSBVB
Chief FSB4101S — Small Flat Panel Interface Bracket, 200x100mm VESA Interface
Custom interface bracket for adapting from 200x100mm VESA to 100x100mm VESA. Compatible with all Chief small flat panel and monitor mounts (except the FSR and FTR). Discontinued April 1, 2015. Replaced by FSBVS
Chief FSB75100B — Small Flat Panel Interface Buttons & Hardware for FSR & FTR
The FSB75100B provides interface buttons & hardware for mounting a small flat panel monitor to the FSR or FTR wall mounts.
Chief FSBVB — Small Flat Panel Universal Interface Bracket, 200x100mm VESA
Universal interface bracket adapts to any display with a 75x75mm, 100x100mm, or 200x100mm VESA pattern. It is compatible with all Chief small flat panel and monitor mounts.
Chief FSBVS — Small Flat Panel Universal Interface Bracket, 200x100mm VESA
Universal interface bracket adapts to any display with a 75x75mm, 100x100mm, or 200x100mm VESA pattern. It is compatible with all Chief small flat panel and monitor mounts. Discontinued April 1, 2015. Replaced by FSBVB
Chief FVS100 — FVS100Распродажа
FVS100 полка для WEB-камеры малая ПОД Fusion
Chief FVS150 — FVS150Распродажа
FVS150 полка для WEB-камеры большая ПОД Fusion
Chief FVS200 — FUSION Above Video Conferencing Camera Shelf - 8"
Discontinued. See FCA800 for replacement. Use this shelf to install a camera above a flat panel TV.Features TAA Compliant
Полка FVS250 для WEB-камеры большая (устанавливается над кронштейном новой серии Fusion)
Chief FVS251 — FUSION Above Video Conferencing Camera Shelf - 14"
Discontinued. See FCA801 for replacement. Use this shelf to install a camera above a flat panel TV.Features TAA Compliant
Chief FVS300 — FUSION In-Line Video Conferencing Camera Shelf - 8"
Discontinued. See FCA820 for replacement. Use this shelf to install a camera above a flat panel TV.
Chief FVS350 — FUSION In-Line Video Conferencing Camera Shelf - 12"
Discontinued. See FCA821 for replacement. Use this shelf to install a camera above a flat panel TV.
Chief JSB2090B — Custom Interface Bracket for Cisco EX90
Custom design allows the Cisco EX90 to be installed on Chief's Thinstall swing arms.
Chief JSB210B — J-Series Medium Interface Brackets
Universal interface bracket compatible with all Chief J-Series mounts.Features TAA Compliant
Chief JSB210S — J-Series Medium Interface Brackets
Universal interface bracket compatible with all Chief J-Series mounts.Features TAA Compliant
Chief JSBUB — J-Series Universal Interface Bracket
Universal interface bracket compatible with all Chief J-Series mounts.
Chief JSBUS — J-Series Universal Interface Bracket
Universal interface bracket compatible with all Chief J-Series mounts.
Chief JSBVB — J-Series VESA Interface Bracket
Universal interface bracket compatible with all Chief J-Series mounts.
Chief JSBVS — J-Series VESA Interface Bracket
Universal interface bracket compatible with all Chief J-Series mounts.
Chief KFA220B — Dual Monitor Cart/Stand Accessory
The KFA220 allows easy mounting of two monitors on a cart or stand.
Chief KFA225B — Widescreen Dual Monitor Cart/Stand Accessory
The KFA225 allows easy mounting of two widescreen monitors on a cart or stand.
Chief KFA320B — Triple Monitor Cart/Stand Accessory
The KFA320 allows easy mounting of three monitors on a cart or stand.
Chief KFA325B — Widescreen Triple Monitor Cart/Stand Accessory
The KFA325 allows easy mounting of three widescreen monitors on a cart or stand.
Chief KSA1018B — Small Flat Panel Metal Stud Accessory
This accessory allows you to mount small flat panel swing arms to a single steel stud.
Chief KSA1018S — Small Flat Panel Metal Stud Accessory
This accessory allows you to mount small flat panel swing arms to a single steel stud.
Chief KSA1020B — CPU Wall/Desk Mount
The perfect solution for integrating a CPU with your desk or wall mount.
Chief KSA1023B — CPU Wall/Desk Mount
This low-profile accessory allows a CPU to mount to the wall and hides CPUs when used with swing arm mounts.
Chief MAC1003B — J-Series Arm Extension Kit
Transforms a single arm or pivot/tilt mount into a full extension product.
Chief MAC1003S — J-Series Arm Extension Kit
Transforms a single arm or pivot/tilt mount into a full extension product.
Chief MAC118B — J-Series Metal Stud Adapter
The MAC118 can be used with a JWD or JWS swing-arm mount to provide a solid solution for steel stud installations.
Chief MAC119B — MWR/PWR Metal Stud Accessory
This steel stud adapter can be used with a swing arm wall mount (such as PWR or MWR) to provide a solid solution for steel stud installations.
Chief MAC251 — M-Series CPU/DVD/Media Player Adapter
Allows integration of a CPU, DVD player or VCR into TV installation solutions using most Chief medium flat panel mounts.
Chief MAC252 — M-Series CPU/DVD/Media Player Adapter
The MAC252 is designed to integrate a CPU with Chief's Medium Flat Panel Mounts.
Chief MAC400 — M-Series Rotation Adapter
This rotation adapter provides the ability to rotate medium flat panel screens from landscape to portrait orientation.
Chief MAC501B — J-Series In-Wall Swing Arm Accessory
Designed to hide a swing arm mount in the wall, taking installations to an even lower profile.
Chief MAC720 — Кронштейн для установки второго дисплея на MFC / MF1 & 2 (не больше 42")
Кронштейн MAC720 для установки второго дисплея на MFC / MF1 & 2 (не больше 42")
Chief MAC722 — M-Series Dual Side-by-Sidel Display Accessory
The MAC722 adds support for two displays side-by-side to carts and floor stands. Note: If you have already ordered a universal cart or stand, you only need to order one interface bracket since these stands come with a universal interface bracket. If you do not ordered a universal cart or stand, you will need two interface brackets (one for each sceeen).
Chief MAC790 — M-Series Swivel Accessory
The MAC790 adds swivel capability to carts and floor stands.
Chief MSBUB — M-Series Universal Interface Bracket
Custom interface bracket compatible with all Chief M-Series Q-Latch mounts. Also compatible with select swing arm mounts (JWD210, JWS210 and JWP210).
Chief MSBUS — M-Series Universal Interface Bracket
Custom interface bracket compatible with all Chief M-Series Q-Latch mounts. Also compatible with select swing arm mounts (JWD210, JWS210 and JWP210).
Chief MSBVB — M-Series VESA Interface Bracket
Custom interface bracket compatible with all Chief M-Series Q-Latch mounts. Also compatible with select swing arm mounts (JWD210, JWS210 and JWP210).
Chief PAC102B — Component Pole Shelf
This accessory shelf makes component installation fast and simple for pole installations.
Chief PAC102S — Component Pole Shelf
This accessory shelf makes component installation fast and simple for pole installations. Compatible on all standard fixed and adjustable 1.5" NPT extension columns and Chief's CPA columns Discontinued April 1, 2015. Replaced by PAC102B
Chief PAC103 — Accessory Shelf Safety Strap
For additional safety this safety strap holds the component on the shelf.
Chief PAC115 — Metal Stud Anchor Kit - 4 Anchors
These kits allow the install of many of our mounts to metal studs. Compatible with all FUSION™ and FIT™ wall mounts and Thinstall™ dual stud swing arm wall mounts.    
Chief PAC116 — Metal Stud Anchor Kit - 8 Anchors
These kits allow the install of many of our mounts to metal studs. Compatible with all FUSION™ and FIT™ wall mounts and Thinstall™ dual stud swing arm wall mounts.    
Chief PAC117 — Metal Stud Anchor Kit - 28 Anchors
These kits allow the install of many of our mounts to metal studs. Compatible with all FUSION™ and FIT™ wall mounts and Thinstall™ dual stud swing arm wall mounts.    
Chief PAC124B — Swing Arm 24" Stud Adapter
This stud kit takes swing arm wall mounts (MWH/MWR/PWR/PNR/PDR) and makes them compatible with 24” (61 cm) center stud systems.
Chief PAC124S — Swing Arm 24" Stud Adapter
This stud kit takes swing arm wall mounts (MWH/MWR/PWR/PNR/PDR) and makes them compatible with 24” (61 cm) center stud systems.
Chief PAC125 — Flat Panel 28" Lateral Shift Accessories
Provides easy spanning of a 24" on-center stud system or 4" of lateral shift on either side of a 16" on-center stud system.
Chief PAC126 — Flat Panel 36" Lateral Shift Accessories
Provides easy spanning of a 24" on-center stud system or 4" of lateral shift on either side of a 16" on-center stud system.
Chief PAC136B — ClickConnect Locking Flag Kit
The PAC136 Click-Connect Flag provides additional safety for flat panel installations.Features Specifications Color: Black Shipping Weight: 0.20
Chief PAC136S — ClickConnect Locking Flag Kit
The PAC136 Click-Connect Flag provides additional safety for flat panel installations. Discontinued April 1, 2015. Replaced by PAC136BFeatures Specifications Shipping Weight: 0.20
Chief PAC138 — ClickConnect Padlock
Provides an additional safety bolt for lock-down capability and increased security. Comes with 2 keysFeatures Specifications Shipping Weight: 0.80
Chief PAC140 — Q-Clamp Accessory
Provides added stability for large flat panel mounts (PWP, PWL, PWS, PDS, PFS, PTS). Comes standard on the PCM, PPC and PTC Series Q-Latch products. Discontinued April 1, 2015
Chief PAC150 — Video Conferencing Shelf
Allows a camera to be installed with the flat panel screen for video conferencing. Discontinued April 1, 2015. Replaced by PAC715
Chief PAC200 — PPC to PPD Adapter Kit
Chief's PAC200 kit is designed to modify the PPC Cart (for single display) to the same features as our PPD Cart (for dual displays).
Chief PAC251 — P-Series CPU/DVD/Media Player Adapter
Allows customers to integrate a CPU, DVD player or VCR into TV installations using most Chief large flat panel mounts.
Chief PAC252 — P-Series CPU/DVD/Media Player Adapter
This adapter fits larger CPU models such as ASUS Pundit-R and NEC Bluefire VC and includes security hardware and ships assembled for easy TV installation.
Chief PAC253 — P-Series CPU/DVD/Media Player Adapter
The PAC253 allows customers to integrate a CPU, DVD player or VCR into TV installations using most Chief Medium and Large Flat Panel mounts.
Chief PAC260D — DMP Mount Direct-to-Display VESA100
This Digital Media Player Mount provides an elegant mounting option for small to medium sized DMPs, CPUs, & Video Conferencing Codecs. It mounts directly to the back of your display via the 100mm VESA mounting location. Pictured is the PAC260W DMP Wall Mount (shown for illustration purposes only)
Chief PAC260P — DMP Mount - Pole
This Digital Media Player Mount provides an elegant pole-mounting solution for small to medium sized DMPs, CPUs, & Video Conferencing Codecs. Pictured is the PAC260W DMP Wall Mount (shown for illustration purposes only)
Chief PAC260W — Digital Media Player, CPU, & Codec Wall Mount
This Digital Media Player Mount provides an elegant wall-mounting solution for small to medium sized DMPs, CPUs, & Video Conferencing Codecs.
Chief PAC261D — DMP mount Direct-to-Display VESA100 (with power brick mount)
Pictured is the PAC261W DMP Wall Mount (shown for illustration purposes only)This Digital Media Player mount provides an elegant mounting option for small to medium sized DMPs and CPUs with multiple mounting options.
Chief PAC261P — Digital Media Player Mounts (with power brick mount)
Pictured is the PAC261W DMP Wall Mount (shown for illustration purposes only)This Digital Media Player mount provides an elegant mounting option for small to medium sized DMPs and CPUs with multiple mounting options.
Chief PAC261W — Digital Media Player Mounts (with power brick mount)
Digital media player mount with wall, pole and direct-to-display mounting options
Chief PAC392B — Universal Flat Panel Slat Wall Accessory - FIT Series
The PAC392 allows installation of Chief's medium and large universal fixed and tilt mounts on all slat wall and tool tile systems and is adaptable with the FIT fixed and tilt mounts (RMF2, RMT2, RLF2, RLT2, RXF2 and RXT2).
Chief PAC400 — P-Series Rotation Adapter
An ideal accessory for projects that require rotation of a large flat panel mount from landscape to portrait position.
Chief PAC501B — M and P-series In-Wall Swing Arm Accessory
Designed to hide a swing arm mount in the wall, taking installations to an even lower profile. Compatible with the PNRIW, PWRIW, MWRIW swing arms. Note: Does not include trim kit.  Trim kit ships with PNRIW, PWRIW and MWRIW dedicated in-wall swing arms.
Chief PAC502B — PXR In-Wall Accessory
Designed to hide a swing arm mount in the wall, taking installations to an even lower profile. Compatible with: 
Chief PAC511 — Retro-Fit Pre-wire In-Wall Box
The PAC511 simplifies plasma TV installation by providing an organized, recessed space for routing excess cables and for attaching surge protectors/power conditioners. Compatible with the PST, PRO, PLP, MSR, MTR, MWH, MWR, PWR, PNR, PDR Compatible with all FUSION products DISCONTINUED. REPLACEMENT PRODUCT SERIES IS THE PAC526 . 
Chief PAC516 — Pre-wire In-Wall Box
The PAC516 simplifies plasma TV installation by providing an organized, recessed space for routing excess cables and for attaching surge protectors/power conditioners. Compatible with the PST, PRO, PLP, MSR, MTR, MWH, MWR, PWR, PNR, PDR Compatible with all FUSION products DISCONTINUED. REPLACEMENT PRODUCT SERIES IS THE PAC526 . 
Chief PAC521N — In-Wall Box (without Power Outlet Conditioner)
An in-wall box accessory that integrates with Chief mounts and assists in power and low-voltage wiring as well as cable management
Chief PAC521P — In-Wall Box (with Power Outlet Conditioner)
A high-performance in-wall box power accessory that integrates with Chief mounts and improves the audio and video performance of flat panel displays. DISCONTINUED For replacement, see PAC525FBP2, PAC525FWP2, PAC526FBP2 or PAC526FWP2. 
Chief PAC522 — (заменяет PAC520)
Короб монтажный CHIEF PAC522 (заменяет PAC520)
Chief PAC525 — In-Wall Storage Box
The PAC525 simplifies flat panel installation by providing an organized, recessed space for routing excess cables and for attaching surge protectors/power conditioners. Compatible with the PST, PRO, PLP, MSR, MTR, MWH, MWR, PWR, PNR, PDR,  Thinstall, and FUSION wall mounts.
Chief PAC525CVR-KIT — Black Cover Kit for PAC525
The PAC525FCVR-KIT adds a professional covered appearance to an existing PAC525F in-wall box installation.   Compatible with the PST, PRO, PLP, MSR, MTR, MWH, MWR, PWR, PNR, PDR,  Thinstall, and FUSION wall mounts. Flange kit is required for addition of coverFeatures Cover includes 4 break away knockouts for cable routing and ventilation  Paintable  to blend in any environment Black & white color options Flange kit is required for addition of cover
Chief PAC525CVRW-KIT — White Cover Kit for PAC525
The PAC525FCVRW-KIT adds a professional covered appearance to an existing PAC525F in-wall box installation.  Compatible with the PST, PRO, PLP, MSR, MTR, MWH, MWR, PWR, PNR, PDR,  Thinstall, and FUSION wall mounts. Flange kit is required for addition of cover
Chief PAC525F — In-Wall Storage Box with Flange
The PAC525F simplifies flat panel installation by providing an organized, recessed space for routing excess cables and for attaching surge protectors/power conditioners.  The addition of the flange adds an aesthetic trimmed appearance and drywall mounting capability. Compatible with the PST, PRO, PLP, MSR, MTR, MWH, MWR, PWR, PNR, PDR,  Thinstall, and FUSION wall mounts.
Chief PAC525F-G — In-Wall Storage Box, 9" x 14.25" x 3.9", TAA Compliant
The PAC525 simplifies flat panel installation by providing an organized, recessed space for routing excess cables and for attaching surge protectors/power conditioners. Compatible with the PST, PRO, PLP, MSR, MTR, MWH, MWR, PWR, PNR, PDR, Thinstall, and FUSION wall mounts.
Chief PAC525F-KIT — Black Flange Kit for PAC525
The PAC525F-KIT adds an aesthetic trimmed appearance and drywall mounting capability to an existing PAC525 in-wall box installation.   Compatible with the PST, PRO, PLP, MSR, MTR, MWH, MWR, PWR, PNR, PDR,  Thinstall, and FUSION wall mounts.
Chief PAC525FBP2 — In-wall Storage Box with 2 Receptacle Filter & Surge
The PAC525FBP2 simplifies flat panel installation by providing an organized, recessed space for routing excess cables. The addition of the flange adds an aesthetic trimmed appearance and drywall mounting capability. Includes a high-performance, dual gang housing, isolated ground, dual receptacle outlet featuring the SurgeX® non-sacrificial multi-stage filtration and surge protection system.
Chief PAC525FC — In-Wall Storage Box with Flange and Cover
The PAC525FC simplifies flat panel installation by providing an organized, recessed space for routing excess cables and for attaching surge protectors/power conditioners.  The addition of the flange and cover adds an aesthetic professional appearance and drywall mounting capability.   Compatible with the PST, PRO, PLP, MSR, MTR, MWH, MWR, PWR, PNR, PDR,  Thinstall, and FUSION wall mounts.
Chief PAC525FCW — In-Wall Storage Box with Flange and Cover
The PAC525FCW simplifies flat panel installation by providing an organized, recessed space for routing excess cables and for attaching surge protectors/power conditioners.  The addition of the flange and cover adds an aesthetic professional appearance and drywall mounting capability.  Compatible with the PST, PRO, PLP, MSR, MTR, MWH, MWR, PWR, PNR, PDR,  Thinstall, and FUSION wall mounts.
Chief PAC525FW — In-Wall Storage Box with Flange
The PAC525FW simplifies flat panel installation by providing an organized, recessed space for routing excess cables and for attaching surge protectors/power conditioners.  The addition of the flange adds an aesthetic trimmed appearance and drywall mounting capability.   Compatible with the PST, PRO, PLP, MSR, MTR, MWH, MWR, PWR, PNR, PDR,  Thinstall, and FUSION wall mounts.
Chief PAC525FW-KIT — White Flange Kit for PAC525
The PAC525FW-KIT adds an aesthetic trimmed appearance and drywall mounting capability to an existing PAC525 in-wall box installation.   Compatible with the PST, PRO, PLP, MSR, MTR, MWH, MWR, PWR, PNR, PDR,  Thinstall, and FUSION wall mounts.
Chief PAC525FWP2 — In-wall Storage Box with 2 Receptacle Filter & Surge
The PAC525FWP2 simplifies flat panel installation by providing an organized, recessed space for routing excess cables. The addition of the flange adds an aesthetic trimmed appearance and drywall mounting capability. Includes a high-performance, dual gang housing, isolated ground, dual receptacle outlet featuring the SurgeX® non-sacrificial multi-stage filtration and surge protection system.
Chief PAC526 — Large In-Wall Storage Box
The PAC526 simplifies flat panel installation by providing an organized, recessed space for routing excess cables and for attaching surge protectors/power conditioners. Compatible with the PST, PRO, PLP, MSR, MTR, MWH, MWR, PWR, PNR, PDR,  Thinstall, and FUSION wall mounts.
Chief PAC526CVR-KIT — Black Cover Kit for PAC526
The PAC526CVR-KIT adds a professional covered appearance to an existing PAC526F in-wall box installation.  
Chief PAC526CVRW-KIT — White Cover Kit for PAC526
The PAC526FCVRW-KIT adds a professional covered appearance to an existing PAC526F in-wall box installation.   Note: Flange kit is required for addition of cover
Chief PAC526F — Large In-Wall Storage Box with Flange
The PAC526F simplifies flat panel installation by providing an organized, recessed space for routing excess cables and for attaching surge protectors/power conditioners.  The addition of the flange adds an aesthetic trimmed appearance and drywall mounting capability.  Compatible with the PST, PRO, PLP, MSR, MTR, MWH, MWR, PWR, PNR, PDR,  Thinstall, and FUSION wall mounts.
Chief PAC526F-G — Large In-Wall Storage Box, 14.25" x 14.25" x 3.9", TAA Compliant
The PAC526 simplifies flat panel installation by providing an organized, recessed space for routing excess cables and for attaching surge protectors/power conditioners. Compatible with the PST, PRO, PLP, MSR, MTR, MWH, MWR, PWR, PNR, PDR, Thinstall, and FUSION wall mounts.
Chief PAC526F-KIT — Black Flange Kit for PAC526
The PAC526F-KIT adds an aesthetic trimmed appearance and drywall mounting capability to an existing PAC526 in-wall box installation.  
Chief PAC526FBP2 — In-wall Storage Box with 2 Receptacle Filter & Surge
The PAC526FBP2 simplifies flat panel installation by providing an organized, recessed space for routing excess cables. The addition of the flange adds an aesthetic trimmed appearance and drywall mounting capability. Includes a high-performance, dual gang housing, isolated ground, dual receptacle outlet featuring the SurgeX® non-sacrificial multi-stage filtration and surge protection system.
Chief PAC526FBP4 — In-wall Storage Box with 4 Receptacle Filter & Surge
The PAC526FBP4 simplifies flat panel installation by providing an organized, recessed space for routing excess cables. The addition of the flange adds an aesthetic trimmed appearance and drywall mounting capability. Includes a high-performance, dual gang housing, isolated ground, 4-receptacle outlet featuring the SurgeX® non-sacrificial multi-stage filtration and surge protection system.
Chief PAC526FBP6 — In-wall Storage Box with 6 Receptacle Filter & Surge
The PAC526FBP6 simplifies flat panel installation by providing an organized, recessed space for routing excess cables. The addition of the flange adds an aesthetic trimmed appearance and drywall mounting capability. Includes a high-performance, dual gang housing, isolated ground, 6-receptacle outlet featuring the SurgeX® non-sacrificial multi-stage filtration and surge protection system.
Chief PAC526FC — Large In-Wall Storage Box with Flange and Cover
The PAC526FC simplifies flat panel installation by providing an organized, recessed space for routing excess cables and for attaching surge protectors/power conditioners.  The addition of the flange and cover adds an aesthetic professional appearance and drywall mounting capability. Compatible with the PST, PRO, PLP, MSR, MTR, MWH, MWR, PWR, PNR, PDR,  Thinstall, and FUSION wall mounts.
Chief PAC526FCW — Large In-Wall Storage Box with White Flange and Cover
The PAC526FCW simplifies flat panel installation by providing an organized, recessed space for routing excess cables and for attaching surge protectors/power conditioners.  The addition of the flange and cover adds an aesthetic professional appearance and drywall mounting capability. Compatible with the PST, PRO, PLP, MSR, MTR, MWH, MWR, PWR, PNR, PDR,  Thinstall, and FUSION wall mounts.
Chief PAC526FW — Large In-Wall Storage Box with White Flange
The PAC526FW simplifies flat panel installation by providing an organized, recessed space for routing excess cables and for attaching surge protectors/power conditioners.  The addition of the flange adds an aesthetic trimmed appearance and drywall mounting capability.   Compatible with the PST, PRO, PLP, MSR, MTR, MWH, MWR, PWR, PNR, PDR,  Thinstall, and FUSION wall mounts.
Chief PAC526FW-KIT — White Flange Kit for PAC526
The PAC526FW-KIT adds an aesthetic trimmed appearance and drywall mounting capability to an existing PAC526 in-wall box installation.
Chief PAC526FWP2 — PAC526FWP2 In-wall Storage Box with 2 Receptacle Filter & Surge
The PAC526FWP2 simplifies flat panel installation by providing an organized, recessed space for routing excess cables. The addition of the flange adds an aesthetic trimmed appearance and drywall mounting capability. Includes a high-performance, dual gang housing, isolated ground, dual receptacle outlet featuring the SurgeX® non-sacrificial multi-stage filtration and surge protection system.
Chief PAC526FWP4 — In-wall Storage Box with 4 Receptacle Filter & Surge
The PAC526FWP4 simplifies flat panel installation by providing an organized, recessed space for routing excess cables. The addition of the flange adds an aesthetic trimmed appearance and drywall mounting capability. Includes a high-performance, dual gang housing, isolated ground, 4-receptacle outlet featuring the SurgeX® non-sacrificial multi-stage filtration and surge protection system.
Chief PAC526FWP6 — In-wall Storage Box with 6 Receptacle Filter & Surge
The PAC526FWP6 simplifies flat panel installation by providing an organized, recessed space for routing excess cables. The addition of the flange adds an aesthetic trimmed appearance and drywall mounting capability. Includes a high-performance, dual gang housing, isolated ground, 6-receptacle outlet featuring the SurgeX® non-sacrificial multi-stage filtration and surge protection system.
Chief PAC700 — ЧемоданРаспродажа
Чемодан PAC700 для перевозки мобильной подставки
Chief PAC710 — Полка
Полка PAC710 стальная для стендов и тележек MF, PF. До 11.3кг, 45(ш)х38(г)см. Цвет черный
Chief PAC710-G — Height-Adjustable Accessory Shelf, TAA Compliant
A Height-Adjustable Accessory Shelf designed specifically for use with Chief flat panel mobile carts and floor stands.
Chief PAC715 — Video Conferencing Camera Shelf - 9"
The PAC715 supports a video conferencing camera above or below the display. Camera shelf provides support for installing a camera above the display using both the 14 x 14" (P-series) and 200 x 200 mm (M - Series) Q-Latch systems, or below the display using the 14 x14" system.
Chief PAC715-G — Video Conferencing Camera Shelf - 9", TAA Compliant
The PAC715 supports a video conferencing camera above or below the display. Camera shelf provides support for installing a camera above the display using both the 14 x 14" (P-series) and 200 x 200 mm (M - Series) Q-Latch systems, or below the display using the 14 x14" system.
Chief PAC716 — Video Conferencing Camera Shelf - 14"
The PAC716 supports a video conferencing camera above or below the display.  Camera shelf provides support for installing a camera above the display using both the 14 x 14" (P-series) and 200 x 200 mm (M - Series) Q-Latch systems, or below the display using the 14 x14" system.
Chief PAC717 — PAC717Распродажа
Полка PAC717 наклонная для рекламной литературы (на PFCU, PF1U, PF2U)
Кронштейн PAC720 для установки второго дисплея на PFC / PF1 & 2 (42" макс!)
Chief PAC722 — P-Series Dual Side-by-Side Display Accessory
The PAC722 adds support for two displays side-by-side to carts and floor stands. Note: If you have already ordered a universal cart or stand, you only need to order one interface bracket since these stands come with one universal interface bracket. If you have not ordered a universal cart or stand, you will need two interface brackets (one for each sceen).
Chief PAC730A — Secure Storage Shelf
This secure storage shelf is the perfect size for secure storage of DVD players, laptops and other similarly sized equipment. Compatible with Chief medium and large carts and stands.
Chief PAC730B — Secure Storage Shelf
This secure storage shelf is the perfect size for secure storage of DVD players, laptops and other similarly sized equipment. Compatible with Chief medium and large carts and stands.
Chief PAC730C — Secure Storage Shelf
This secure storage shelf is the perfect size for secure storage of DVD players, laptops and other similarly sized equipment. Compatible with Chief medium and large carts and stands.
Chief PAC735A — Secure Storage Cabinet
The PAC735 provides secure storage for rack mount equipment, PCs, codecs and other large AV equipment.
Chief PAC735B — Secure Storage Cabinet
The PAC735 provides secure storage for rack mount equipment, PCs, codecs and other large AV equipment.
Chief PAC735C — Secure Storage Cabinet
The PAC735 provides secure storage for rack mount equipment, PCs, codecs and other large AV equipment.
Chief PAC770 — Heavy-Duty Casters
Includes 4 heavy-duty replacement wheels for Chief's PFC and MFC mobile carts.
Chief PAC775 — Outdoor Casters
These outdoor casters help to reduce vibration transmitted to equipment.Features Comes with four casters: two with a brake and two without a brake.
Chief PAC780 — Height Assist Accessory 50-75 lbs
The PAC780 helps to neutralize the weight of displays for easier height adjustment.
Chief PAC782 — Height Assist Accessory 75-100 lbs
The PAC780 helps to neutralize the weight of displays for easier height adjustment.
Chief PAC784 — Height Assist Accessory 100-125 lbs
The PAC780 helps to neutralize the weight of displays for easier height adjustment.
Chief PAC790 — P-Series Swivel Accessory
The PAC790 adds swivel capability to carts and floor stands.
Chief PACCC1 — Center Channel Speaker Adapter
Allows easy integration of center channel speakers with Chief flat panel mounting solutions.Features Comes mostly assembled for faster installation Provides up to 5" (127 mm) height adjustment to accommodate varied speaker heights Fore/aft adjustment to level speaker with front of flat panel Height adjustment of 3.25" (83 mm) to level speakers TAA Compliant   Compatible with: PNR, PDR, PIW, PWR, MIW, MWR, MWH, PCS, MCS, PFC, PF1, MFC, MF1, FSRV & FTRV
Chief PACCC2 — Center Channel Speaker Adapter
Allows easy integration of center channel speakers with Chief flat panel mounting solutions.Features Comes mostly assembled for faster installation Provides up to 5" (127 mm) height adjustment to accommodate varied speaker heights Fore/aft adjustment to level speaker with front of flat panel Height adjustment of 3.25" (83 mm) to level speakers TAA Compliant   Compatible with: PNR, PDR, PIW, PWR, MIW, MWR, MWH, PCS, MCS, PFC, PF1, MFC and MF1
Chief PACCS1 — Large Accessory Shelf
Use the PACCS1 to install AV components below a flat panel when using Chief Swing Arm and Ceiling mounts. Designed to accommodate Chief's 200mm x 200mm and 14" x 14" Q-latch mounting systems
Chief PACGB1 — Metal Single Gang Electrical Box
The PAC-GB1 kit is designed for use with Chief Series Mounts.
Chief PACHFK1 — PAC501 In-Wall Header/Footer Kit
The PACHFK1 is designed to support Chief's PAC501 in-wall solution by eliminating the need to install a standard wood header and footer.
Chief PACLK1 — Cable Lock Accessory
Adds security to any FIT fixed wall mounts.
Chief PACLR1 — Left/Right Speaker Adapter
This adapter allows easy integration of side speakers with Chief flat panel mounting solutions.
Chief PACLR2 — Left/Right Speaker Adapter
This adapter allows easy integration of side speakers with Chief flat panel mounting solutions.
Chief PACTP1 — PFC & PF1 Touch Panel Stabilizer Kit
Add extra stability to your cart display with the PACTP1 Stabilizer kit
Chief PACUNV1 — PAC525 / PAC526 AV Component Adapter Bracket
The PACUNV1 enables secure attachment of AV equipment inside the PAC525 and PAC526 in-wall box series.  The snap fit design simply attaches to the wire tie anchor point location inside the box.  Features DM-RMC-SCALER-CDM-RMC-200-C
Chief PAS100 — Presenters Cart Acrylic Shelf
An accessory shelf for holding several components on Chief's presenters cart (PPC).
Адаптер PSBUb Black (43"-63"+ на Chief PDR/PNR/PST/PLP/PRO, CM2/CM1)
Chief PSBUS — P-Series Universal Interface Bracket
A custom interface bracket that can be ordered separately for Chief's large flat panel mounts.
Chief TA100 — Полка THINSTALL
Полка TA100 THINSTALL для установки DVD-плееров/CPU/DVD/VCR черная
Chief TA200 — Полка THINSTALL 8"Спецпредложение
Полка TA200 THINSTALL 8" черная для установки камеры или иного оборудования
Chief TA250 — Полка THINSTALL 12"
Полка TA250 THINSTALL 12" черная для установки камеры или иного оборудования
Chief TA300 — THINSTALL™ Left/Right Speaker Adapter
This adapter allows easy integration of side speakers with any Chief THINSTALL™ Large and Medium swing arm (TS525, TS325 and TS318 products)
Chief TA350 — THINSTALL™ Center Channel Speaker Adapter
This adapter allows easy integration of a center channel or soundbar with any Chief THINSTALL™ Large and Medium swing arm (TS525, TS325 and TS318 products)
Chief TA410 — THINSTALL™ Portrait Adapter
This adapter allows portrait screen orientation on all Chief THINSTALL™ Large and Medium swing arm (TS525, TS325 and TS318 products)
Chief TA500 — Large THINSTALL™ In-Wall Swing Arm Accessory for TS525TU & TS325TU
Designed to take an already thin swing arm to a zero depth design. Does not impact the functionality of the THINSTALL arm.  Will still allow the height adjustment of the mount. Compatible with:
Chief TA501 — Medium THINSTALL™ In-Wall Swing Arm Accessory for TS318TU
Designed to take an already thin swing arm to a zero depth design. Compatible with TS318TU
Chief TA502 — Small THINSTALL™ In-Wall Swing Arm Accessory for TS218SU & TS118SU
Designed to take an already thin swing arm to a zero depth design. Compatible with: TS218SU TS118SU Note, the box height dimension with trim is 18.85".  To completely cover the in-wall box, be sure to confirm your display height is larger than 18.85".
Chief TPK1 — Pole Clamp Kit - 1 to 2" OD (2 Pieces)
Pole clamps for Chief's TPP, TPS and TPM series of Truss and pole mounts
Chief TPK2 — Pole Clamp Kit - 2 to 3" OD (2 Pieces)
Pole clamps for Chief's TPP, TPS and TPM series of Truss and pole mounts
Chief TPK3 — Truss Clamp Kit - 0 to 1" OD (4 Pieces)
Pole clamps for Chief's TPP, TPS and TPM series of Truss and pole mounts
Chief TPK4 — Truss Clamp Kit - 1 to 2" OD (4 Pieces)
Pole clamps for Chief's TPP, TPS and TPM series of Truss and pole mounts
Chief TPK5 — Truss Clamp Kit - 2 to 3" OD (4 Pieces)
Pole clamps for Chief's TPP, TPS and TPM series of Truss and pole mounts

Поворотные колесики

Chief NAC25H — 2.5" Heavy Duty Rack Casters
2.5" Casters for easy movement of E1, S1, and G1 racks. Features Specifications Shipping Dims: 9" x 9" x 4" Shipping Weight: 7.30

Электропитание

Chief PACPC1 — Power Filter Kit
Power up your installation with this power filter kit. Provides noise filtering and surge protection. Includes a high-end power filter and necessary hardware Easily integrates with Chief wall mounts, in-wall accessories and 1.5" NPT extension columns US and Canada only.
Chief PX2W — Power Filtering & Surge Protection
The PX2W is a high-performance power accessory that integrates with Chief mounts and improves the audio and video performance of projectors and flat panel displays. US and Canada only. DISCONTINUED. Replacement coming 2015.  For interim replacement purchase PACPC1